Question about Windhager Hitzeschutzfolie für Fenster 92x200cm

This is 92 cm x 2 m.

How to apply the film. 1:
1. thoroughly clean the window pane with a window scraper, scraper and water. Then wipe the window frame with kitchen paper. 2.
Pre-cut the sun protection film with the cutter so that an additional edge of 2 to 3 cm protrudes on all sides. 3.
Use two adhesive strips to remove the protective film. 4.
Moisten the adhesive side of the sun protection film with plenty of soapy water and slowly peel off the protective film. 5.
Turn the sun protection film over and apply the adhesive side to the pane. 6.
Moisten the film with the spray bottle so that the scraper can glide easily over the non-adhesive side. 7.
Smooth the scraper from the centre outwards, working from top to bottom. 8.
Cut the film so that there is a 2 mm gap between the edge of the window and the film on all sides and the film does not touch the edge of the window. Smooth again with the scraper.

The film must be removed from the window with a window scraper or similar.