CHF50.90
Neomounts Desk holder FPMA-D550DBLACK
Questions about Neomounts Desk holder FPMA-D550DBLACK
What would you like to know?
0 questions and answers
Hello Elu08 Yes, that is possible. Just make sure that your monitors have a VESA 75x75 or 100x100 mount, then it will fit. Many greetings Milan
Yes, works well for me with 2x 24", mounted more to the left, one straight, the other angled
You'd have to look at forum reviews for that, hard to answer :(
Helpful answer
The arm has no joint that can be adjusted up or down! Both arms are mounted on a central "clamp" and both arms are always moved simultaneously. You can only adjust the length of the arms by bending them! Of course, the two arms are always at the same height, i.e. it is not possible to have e.g. the lower or upper edge flush with different monitors. I have two monitors of the same size (ASUS VA24EHE) mounted on my arm and prefer to align one monitor frontally and the other at a 30° angle to it. This is already difficult with this arm and I could imagine with your monitors you could only mount the monitors directly next to each other (frontal). In general, I don't have any concerns about the weight, the arm is really stable, but it could be that it might flex slightly at 8.1kg.
Helpful answer
Serious??? Of course they are there.
Helpful answer
See last picture. Max. 88mm
Yes, each of 2 mounts have 75x75mm and 100x100mm
Hello, Normally yes. Your screens have a 100mm<100mm vesa drilling according to this link (https://www.acer.com/ac/en/NZ/content/model/UM.HB0SA.003) and the stand is still so it should be fine. I also have two Acer 27" Nitro VG270Ubmiipx monitors and it works fine.
Yes, that should work. What I would recommend is to move the table forward a bit if you don't have enough space on your desk.
Helpful answer
The clamp opens around 10cm and there are two mounts included (clamp and grommet).
Helpful answer
I think what they mean by 16kg is 8kg for each arm, I got mine recently it works really well, you just gotta tighten the bolt (or whatever the technical name is) a little bit more so the screen doesn’t go down. ‘Cause if do not tighten the screen enough to the arm it goes down, so just use a wrench and find the best angles you like! By the way my monitor is kinda empty too and it does the job perfectly!
Yes, you can as long as your monitors have the VESA 75x75 or 100x100 hole pattern. Look at the back of your monitors and you will see 4 threads where you can attach the bracket. I myself have 2x 27" monitors.
No, unfortunately, this is not possible.
32 inch. I have mounted 2x 27 inch
14 of 14 questions