Best selling Microphone accessories
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. RØDE Interview GO Hand Holder
By inserting the transmitter module of the Wireless GO radio link into the appropriate slot at the top of the Interview GO and fitting it with the included foam windscreen, you get a stylish wireless reporter microphone with excellent voice transmission. The range of the Wireless GO system is more than adequate at 70 metres.
2. RØDE Wireless Go II Charging Case
Stylish, robust, 10 cm wide zipped case covered in grained leatherette for the three modules of the RØDE Wireless GO II wireless microphone system (2x transmitter TX and 1x receiver RX).
The battery capacity is 4500 mAh, which allows the modules to be fully charged twice. On the back of the case is the USB-C port and next to it a charging status LED with test button.
Features
- Robust zipped case with imitation leather cover
- for simultaneous charging of the three Wireless GO II modules
- Slots for 2x transmitter (TX) and 1x receiver (RX)
- Battery capacity: 4,200 mAh
- Allows two complete charges of all three modules
- Input: USB-C, 5V DC/3A
- Charging status LED with test button
- Dimensions: 98 x 71 x 78 mm
- Weight: 185 g.
3. RØDE SC15 USB-C auf Lightning-Kabel umgestellt
USB-C to Lightning Cable
A high quality, 30 cm long and well shielded USB-C to Lightning cable. The SC15 allows you to digitally connect the VideoMic NTG to an iPhone, elegantly bypassing the iPhone's preamp/converter section for the best possible audio quality. In addition, the VideoMic NTG's 3.5mm jack can then be used as an adjustable headphone output. The SC15 has an integrated element with which it can be perfectly attached to the cable management of the VideoMic NTG, thus eliminating annoying slagging.Featureshigh-quality ribbon cableUSB-C to Lightningfor digital connection of the VideoMic NTG to an iPhonealso suitable for other Apple devices with Lightning connectorcompatible with cable management of the VideoMic NTG.
4. K&M 85070 Microphone clamp
The microphone clamp made of elastic, high-quality plastic material holds the most common microphones with a shaft diameter of 34 - 40 mm absolutely securely. Thanks to the special design, the microphone is mounted in the middle and locked in place. This allows the microphone to be attached or removed quickly and easily.
5. sE Electronics DM1 Dynamite
An ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones.
6. RØDE MagClip GO
Clothing can be clamped between magnet and clip for maximum flexibility. The MagClip GO can even be used to discreetly place the microphone on an object, scene or stage to record dialogue.
7. RØDE SC16 USB-C cable
The SC16 is a high quality USB-C to USB-C cable for connecting RØDE microphones with a USB-C output to USB-C compatible devices. With a length of 300mm, the cable is ultra-flexible, allowing you to easily attach it to your devices. It also features a built-in cable grip that is compatible with the shock-absorbing VideoMic NTG cable management system.
It is particularly suitable for connecting the VideoMic NTG to USB-C mobile devices, but can also be used with any RØDE device with a USB-C output, including the NT-USB Mini, Wireless GO and RØDECaster Pro.
8. Elgato shock mount
Wave Shock Mount perfectly protects your wave microphone from vibrations caused by use or shocks that cause low-frequency noise. The sturdy steel frame with reinforced elastic suspension absorbs shocks as well as possible, so you can record crystal-clear audio without annoying rumble. And to keep you flexible, the included adapter allows you to connect to most popular microphone arms. Wave Shock Mount is specifically designed to isolate the Wave:1 and Wave:3 microphones from vibrations transmitted through mounts and surrounding surfaces, so you can work with crystal-clear audio with high concentration.
9. Img Stage Line Thread adapter 3/8" to 5/8
16 mm external thread (5/8") and combined 9 mm internal thread (3/8") suitable for microphone stands and goosenecks.
Microphone accessories
Quantity discount
CHF3.80 per piece for 4 units
Img Stage Line Thread adapter 3/8" to 5/8
10. sE Electronics RF-X
The RF-X is equipped with a newly designed lightweight mounting bracket and consists of a composite screen with a wool layer, an air gap layer and an acoustic foam layer on the inside. The multi-layer construction with air gaps largely prevents sound spots during operation, which distinguishes the RF-X from the competition. Now there is a true SE Reflection Filter-X for everyone, anytime, anywhere.
Product order
See all products