Top-rated products in the Thermal pads category
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Thermal Grizzly Minus Pad 8
The easy to process and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex, nano-aluminum oxide. The pads therefore always guarantee optimum heat transfer.
Even the slightest contact pressure is sufficient for optimum fastening.
All pads are environmentally friendly and RoHS compliant.
W/mK 8.0, temperature range -100°C / +200°C
2. Arctic Thermal pad 0.5 mm
The Arctic Thermal Pad provides an efficient thermal interface between heat sink and electronic devices where uneven surfaces, air gaps and rough surface structures are present. The silicon-based material surpasses generic pads, is flexible and adaptable and therefore works at low pressure. 145 x 145mm (0.5)
3. Thermal Grizzly Minus Pad 8 100x100x1mm
The easy to apply and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex, nano-aluminum oxide. The pads thus always guarantee optimum heat transport.
Even the slightest contact pressure is sufficient for optimum fastening. All pads are environmentally friendly and RoHS compliant.
W/mK 8.0, temperature range -100°C / +200°C
4. Thermal Grizzly Minus Pad 8 (100x100x2mm)
The easy to process and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex, nano-aluminum oxide. The pads thus always guarantee optimum heat transport.
Even the slightest contact pressure is sufficient for optimum fastening. All pads are environmentally friendly and RoHS compliant.
W/mK 8.0, temperature range -100°C / +200°C
5. Thermal Grizzly Minus Pad 8 (30x30x1.5mm)
The easy to process and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex, nano-aluminum oxide. The pads thus always guarantee optimum heat transport.
Even the slightest contact pressure is sufficient for optimum fastening. All pads are environmentally friendly and RoHS compliant.
W/mK 8.0, temperature range -100°C / +200°C
6. Thermal Grizzly Minus Pad 8 (100x100x0.5mm)
The easy to process and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex, nano-aluminum oxide. The pads thus always guarantee optimum heat transport.
Even the slightest contact pressure is sufficient for optimum fastening. All pads are environmentally friendly and RoHS compliant.
W/mK 8.0, temperature range -100°C / +200°C
7. Thermal Grizzly Carbonaut thermal pad - 38 × 38 × 0.2 mm
To achieve these goals, Thermal Grizzly has worked closely with and tested the well-known extreme overclocker Roman "der8auer" Hartung during product development, developing chemical compounds and analyzing competitors.
The features of the Thermal Grizzly Carbonaut thermal pad at a glance: Reusable, non-adhesive heat-conducting pad. Made of carbon-based polymer with nanoparticles. Extremely high thermal conductivity of 62.5 W/(m-K). 0.2 mm thick and 38 × 38 mm Intel CPUs for Socket 2066 and AMD CPUs for Socket AM4. Attention. Please observe the manufacturer's warnings before use. The Carbonaut is electrically conductive and is therefore not suitable for use on MOSFETS or voltage converters.
Thermal pads
–26%
21.30was 28.90
Thermal Grizzly Carbonaut thermal pad - 38 × 38 × 0.2 mm
0.20 mm, 62.50 W/m K
8. Alphacool Ice layer Heat conducting pad
An ice layer not in the conventional sense of frozen water but a layer that makes every chip freeze. The properties of the new thermal pads speak for themselves. The "Alphacool Ice Layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more. The field of application is just as versatile, whether for RAM and mainboard coolers or graphic card and CPU coolers, wherever circuit boards meet heat sinks, the Alphacool ice layer is a good choice. Dimensions of the pad 100x100x1mm.
9. Phobya Thermal pad XT 120x20x1mm
Phobyas improved thermal pads with 7W/mk are technically at eye level with high-end thermal pastes. These heat conduction pads "XT" are perfectly suited to compensate height differences and unevenness on heat sinks and the elements to be cooled. Due to the very good elastic contact pressure and the low hardness, a very good adaptation to the surfaces is achieved even with a low contact pressure. All large and small differences in height are compensated, even from microscopically small grooves to visible unevenness. The surface of the pad is covered with a protective film which must be removed before use. These heat conducting pads can of course also be cut to the desired size. They can be used for ram coolers of the graphics card as well as for voltage converters of the mainboard. These thermal pads can even be used for large components such as the North or South Bridge because they have excellent thermal conductivity.
10. Thermal Grizzly Carbonaut thermal pad - 32 × 32 × 0.2 mm
Thermal Grizzly from Hamburg is a new German brand that is committed to fighting high temperatures and poor heat transport. The goal is to provide the overclocker scene with powerful thermal conduction products that are still a weak point - but the product portfolio can also be used for better and quieter cooling of gaming computers, workstations, mini PCs and many other purposes. In addition to higher clock rates, better thermal conduction products enable quieter cooling and a longer service life of the components to be cooled.
To achieve these goals, Thermal Grizzly has worked closely with and tested the well-known extreme overclocker Roman "der8auer" Hartung during product development, developing chemical compounds and analyzing competitors. Now the product line is extended by an innovation in Puncto thermal pads: Thermal Grizzlys Carbonaut.
Thermal pads
–22%
19.60was 25.10
Thermal Grizzly Carbonaut thermal pad - 32 × 32 × 0.2 mm
0.20 mm, 62.50 W/m K