Top-rated products in the Lighting technology mounting category

Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.

1. Toolcraft Rolling stand for magnifying lamp 96

More flexibility, stability and working comfort for your magnifying lamp.
The product serves as a movable support for your suitable loupe lamp. The maximum permissible weight of a mounted magnifier lamp is 3.3 kg. 

2. Showtec Fog fluid

This water-based fog fluid was developed especially for entertainment fog machines and produces a white, harmless fog of high chemical purity. This odourless fluid leaves no oily residue and is absolutely harmless to health. It is suitable for almost all fog machines. Attention: Keep away from children. Do not swallow liquid. 5 litres. 

3. Showtec Safety Cable Heavy Duty, 75 cm

Reaching new heights with safety cables: Par cans, speakers, moving heads, disco balls, trusses, mounts, projectors, flat screens – all these products have one thing in common. Once they are used, whether statically or as a moving effect, in elevated positions or over people or crowds, you are required to use an independent secondary safety device in accordance with BGV-C1 and VGB regulations to ensure the safety of your venue's visitors. In all these cases, safety cables must be used to secure your equipment and ensure that secured static equipment does not fall more than 20 cm in an emergency, or that moving equipment does not fall more than 5 cm, to prevent excessive impact forces. Just as important as the safety cable itself are the links, carabiners, or catbiners, as the whole system is only as strong as its weakest link. That’s why our safety cables are also equipped with certified connectors to ensure safe use, as long as the cable and the link are handled according to their specifications. Safety cables can be used in single or double wire configurations to carry and secure their specified load. Please check the specifications with each cable to find the one that perfectly suits your needs. One important point: safety cables are intended for securing your equipment and should not be used for lifting devices. For this purpose, you can use our well-equipped Lodestar range. 

4. BeamZ Light stand with T-bar LS25T

A high-performance lighting stand, ideal for use on stage, at a drive-in, with bands, etc., due to its lightweight design. Equipped with a T-bar featuring hanging points for light effects, cans, or other devices. The stand is compactly foldable and secured with a screw mechanism and metal pins, ensuring safe and stable use.

- Screw mechanism and pins
- Foldable legs
- Rubber feet
- Sturdy construction. 

5. BeamZ Security Cable

The BeamZ safety cable is a robust and reliable accessory for mounting lighting equipment. With a length of 95 cm and a diameter of 5 mm, it offers a maximum load capacity of 65 kg, making it ideal for securing lighting effect devices, spotlights, and fixtures. Made from high-quality steel, this cable ensures high stability and safety during use. It is an essential element for professional lighting installations where safety and reliability are top priorities. The safety cable is manufactured in Germany and meets high-quality standards to meet the demands of the events and lighting technology sectors.

- Maximum load capacity of 65 kg for safe applications
- Made from sturdy steel for high stability
- Ideal for securing lighting effect devices and spotlights. 

6. Accessory Eyebolt M8/30mm, stainless steel

Fangseilöse

- For lifting, carrying, suspending, and securing.

- Used as a fastening device or connecting element, e.g., for screwing into the attachment points of a speaker box.

- Warning: The working load limit (WLL) of this product applies to lifting and carrying loads in hoisting operations. It does not describe the maximum permissible weight for which the product is designed when used over people.

- Thread: M8 thread x 30 mm. 

7. Showtec Safety Light Duty

Movable lighting, picture and sound equipment must be secured against falling by two independently acting devices. Typical movably suspended or fixed devices used in event and production technology are e.g. spotlights, effect devices, loudspeakers, supporting structures as well as trusses, mounting brackets, mirror balls, monitors, projection devices etc. In the cases described here, a safety element (second independent safety device) consists of wire rope, rope end connection and connecting link. When dimensioning the elements, the dynamic forces when absorbing the load have been taken into account. Safety ropes consist of a wire rope according to DIN 3060 (round strand rope 6 x 19 standard, with fiber core) with a nominal strength of the wires of 1770 N/mm2. Quick connection links, chain links, screw carabiners or shackles can be used as links in safety ropes. A safety rope must be attached in such a way that the drop height of the object to be secured is as low as possible. The fall height of 20 cm must not be exceeded. When an object falls into the safety element, there is an impulse load for the rope. This impulse force is partly absorbed by the rope elongation. When securing on movable lamp hangers, the safety ropes must be attached in such a way that the height of fall of 5 cm is not exceeded, so that the impulse forces on the lamp hanger do not become too great when a load falls. A safety element which has once been loaded or apparently damaged must not be used again. The safety rope must not be used as a connection rope for general hoisting operations. 

8. BeamZ Light Bridge 2

BeamZ Light Bridge 2, 3m x 4m, max. 100kg.

9. Brennenstuhl Telescopic tripod ST 302 for construction spotlights, height-adjustable up to 3m

Compatible with the Jaro and Rondo spotlights.

The Bau telescopic tripod ST 302 with lowering automation allows for stepless height adjustment from 1.24 m to 3 m. Additionally, the tripod offers flexible mounting options, including a T-bar for mounting a single spotlight and a crossbar for mounting two spotlights. The lowering automation ensures controlled lowering for added safety. The telescopic tripod, with a maximum load capacity of 20 kg and an integrated cable holder, also impresses with the following features:

- 3 foldable, extremely stable feet with rubber protection
- Height adjustable up to 3 m
- Includes T-bar and accessories: wing screw M8x20 / 2xM6x45 screws / 2xM6 nuts / 4xM6 washers
- Includes crossbar and accessories: 4x M6x55 screws / 4xM6 nuts / 8xM6 washers. 

10. BeamZ Clamp BC50B-150F

Trigger clamp for pipe and truss mounting. Tiltable quick coupler system. Allows clamps to remain on lighting effects. Very strong aluminum construction. Butterfly and M10 locknut attachment. For pipe/truss diameters of 35 - 60 mm. Load capacity: 50 kg. This swiveling quick trigger clamp is made of die-cast aluminum and is suitable for pipe and truss mounting. The wide clamping opening makes the clamp compatible with various sizes of trusses and pipes. The unique tilting system ensures that the clamp can stay on the lighting effect, making it easy to transport in a flight case. Equipped with a secure and ergonomic handle. 

See all products