Best selling UPS accessories from Gude
This page always stays fresh and updates automatically.
1. Gude 8112-2 Sequencer C13 UES Mains filter
Increase in operational safety through sequential switching of 6 consumers
Devices connected to the load outputs can be automatically turned on and off in a sequential manner, with the shutdown occurring in reverse order. The switching sequence is triggered by pressing the switch on the front of the 19-inch device. Each power port is switched on with a delay of 3 seconds. This time interval can be individually adjusted for each load output. The integrated Type 3 surge protection in the Expert Power Sequencer 8112-2 and 8112-4 effectively prevents damage to the device and the connected consumers. Additionally, the power distributors are equipped with a network filter that helps avoid interference noise in speakers or audio amplifiers.
Application Examples
- Increased operational safety by avoiding excessive inrush currents, e.g., in amplifiers, media technology installations, and LED walls
- Savings on electricity costs by turning off devices with high standby consumption, such as receivers, servers, external hard drives, displays, and audio amplifiers
- Critical devices, such as an audio amplifier, are switched on last and off first. The typical and unpleasant popping noises that can damage speakers and amplifiers are a thing of the past.
- The jack connection allows for the connection of an external button, enabling control outside of a 19-inch cabinet.
Usage Locations
- AV environments with audio components, such as in conference rooms, theaters/auditoriums, and small meeting rooms
- Installations for display and LED walls
- IT environments, such as in network and server cabinets (19 inches)
- AV systems in the smart home sector with amplifiers, speakers, and projectors.
2. Gude Power Control 8041-1
12-fold switched PDU for reducing power consumption, remote maintenance, and environmental monitoring. With the new IP-controlled sockets, the power consumption of the installation can be effectively reduced: the collective shutdown of consumers, even in standby mode, along with the integrated energy meters, contributes to a sustainable operation of the infrastructure. Furthermore, the operator receives alerts when leakage currents occur, enabling preventive maintenance measures before any downtime happens. The PDUs feature 4, 8, or 12 load outputs (IEC C13 or protective contact) on the back, allowing connected devices to be turned off and on in case of a fault. This is also possible through media controls and DCIM solutions. Defined thresholds further ensure that event-based switching operations can be initiated. Two integrated sensor connections for optionally available sensors allow for monitoring of ambient temperature, humidity, and air pressure. Critical system states are thus detected early. Thanks to hot-plug-capable sensors, commissioning with the Expert Power Control series is completed quickly.
3. Gude 7214-11 Exp.Sensor Box Temp 2xSensorport 1xRel.Out 1xIO In PoE
Expert Sensor Box 7214 Series
The Expert Sensor Box 7214 Series enables environmental monitoring of IT installations over TCP/IP networks. Three variants are available, each equipped with built-in sensors and two sensor ports for extended monitoring. Depending on the model, the integrated sensors can measure temperature, humidity, and air pressure. All three sensor variants are also available in a version powered by Power-over-Ethernet (PoE).
Additionally, the devices feature a switchable relay output and a passive signal input, allowing for remote control of connected NO/NC devices. The Expert Sensor Box 7214 Series is equipped with SNMPv3, SSL, and IPv6 capabilities, and supports Telnet, Radius, and Modbus TCP.
- Integrated temperature sensor
- Two ports for additional optional sensors
- Passive signal input and switchable relay output
- IPv6, SNMPv3, SSL, Telnet, Radius, Modbus TCP
- Two ports for redundant power supply
- Power-over-Ethernet version.
4. Gude IP Power Switch
The Expert Power Control 8045 series allows for the switching and power measurement of electrical devices over a TCP/IP network, a serial connection, or via a mobile app. The series consists of two variants, each with 12 load outputs on the back. These power ports can be individually controlled through a web interface, the serial interface, SNMP, or the button on the device. It supports SNMPv3, SSL, and IPv6, as well as Telnet, Radius, and Modbus TCP. The switched and outlet-metered PDU features a total power measurement along with two integrated energy meters per load output. The measurement of various electrical parameters enables users to identify and leverage energy-saving potentials at the device level within the IT environment. Additionally, operators receive alerts when fault currents occur, allowing for preventive maintenance measures before any downtime happens.
Applications:
Industrial environments: Production facilities, warehouses, or manufacturing areas
IT installations: Technical rooms, data centers, 19" racks, or server rooms
AV environments: Huddle rooms, conference rooms, theater/auditorium spaces, LED walls, or digital signage systems.
5. Gude Remote switching socket
The remote control socket from Gude, model 8001-1, is a highly advanced power distribution unit specifically designed for mounting on DIN rails. It offers a variety of features to enhance operational safety and energy efficiency across different applications. With five load outputs, it allows for precise control and monitoring of power consumption. The integrated event and schedule-based switching function enables devices to be turned on or off according to individual schedules, providing flexible usage. Additionally, load outputs can be automatically switched when preset sensor thresholds are exceeded, offering extra safety. The straightforward installation and the ability to connect plug-and-play sensors make it particularly user-friendly. This remote control socket is therefore an ideal solution for anyone in need of reliable and efficient power distribution.
- Event and schedule-based switching for flexible usage
- Precise power measurement per load output with residual current monitoring
- Connection for plug-and-play sensors for real-time monitoring
- Programmable on/off sequences for remote restarts
- Adjustable turn-on delay of up to 9999 seconds after a power outage.
6. Gude 8311-15 Expert PDU Energy 4x C19 16x C13
The Gude 8311-15 Expert PDU Energy is a highly advanced power distribution unit specifically designed for use in data centers and professional IT environments. With a total of 20 load outputs, including 4 C19 and 16 C13 connections, this PDU offers a flexible and efficient solution for power distribution. The integrated measurement and evaluation capabilities enable precise monitoring of power consumption and performance, contributing to the optimization of energy efficiency. The PDU is equipped with a backlit two-line LCD display that allows for easy reading of measurements. Additionally, the Gude 8311-15 supports a variety of network protocols, including SNMP and Modbus TCP, facilitating integration into existing networks. The ability to perform firmware updates while in operation ensures future-proof usage.
- Integrated measurement of current, voltage, phase angle, and power factor
- Two energy meters: one permanent, the other resettable
- Easy configuration via web browser and support for various operating systems
- Optional sensor connections for environmental monitoring (temperature, humidity, air pressure)
- IPv6-ready and supports multiple network protocols (SNMP, Modbus TCP).
7. Gude 7213-3 Exp.Sensor Box Temp-H-Lftdr 2xSensorport
The Gude 7213-3 Expert Sensor Box is a versatile device for environmental monitoring, specifically designed for IT installations. With integrated sensors for measuring temperature, humidity, and air pressure, this device offers a comprehensive solution for monitoring environmental conditions. The Sensor Box is accessible via TCP/IP networks, allowing for easy integration into existing systems. It features two additional sensor ports for expanded monitoring capabilities. The robust steel sheet construction ensures durability, while support for protocols such as SNMPv3, SSL, and IPv6 guarantees secure and flexible usage. Additionally, the Sensor Box comes with a free smartphone app that enables remote access to the data, making monitoring even easier.
- Integrated sensors for temperature, humidity, and air pressure
- Two ports for optional sensors for extended monitoring
- Supports Power-over-Ethernet for flexible installation
- Robust steel sheet housing for high durability.
8. Gude 8311-16 - PDU 1x sensor 4 x IEC C19 16 C13 - 1.5 m
The Gude 8311-16 Expert PDU is a powerful power distribution unit specifically designed for use in data centers and server rooms. With a length of 1.5 meters, it offers a flexible solution for distributing power to various devices. The PDU features four IEC C19 outputs and 16 IEC C13 outputs, enabling efficient power supply. A standout feature of this PDU is the integrated residual current monitoring, which allows for precise monitoring of power consumption and electrical parameters. User-friendly configuration is done via a web browser or specialized software for Windows and Linux, making it easy to adapt to individual requirements. Additionally, the PDU is IPv6-ready and supports various protocols, making it a future-proof solution.
- Integrated Type A residual current monitoring for monitoring power consumption and electrical parameters
- Illuminated two-line LCD display for easy readability
- Two energy meters: one permanent, the other resettable
- Support for optional sensors for environmental monitoring (temperature, humidity, air pressure)
- Firmware updates can be performed while in operation via Ethernet.
9. Gude 1121-1 EPC 10A 2xC13 1xSen.PortÜSS
2-way switched PDU with integrated measurement and monitoring functionality. Two AV devices can be powered and switched individually. Quick and easy commissioning with free drivers for leading AV and IT control systems. Precise energy monitoring as well as measurement of temperature and humidity with plug-and-play sensors. Remote reboots and automatic power supply switching. Two load outputs can be individually controlled via the device, HTTP(S), SNMP, ModbusTCP, as well as through the command line interface via Telnet, SSH, and MQTT. Switching status and power-on delay (0 to 9999 seconds) can be set for each power outlet after a power failure. Power spikes during simultaneous switching operations are prevented by an automatic delay time of 1 second. Programmable schedules as well as on and off sequences. Dual-channel watchdog, with each power outlet able to be assigned its own watchdog. Load outputs can be switched when preset sensor thresholds are exceeded.
10. Gude 8035-1 Expert Power Control NET 8x C13, measurement per port, 2xsensorport
The Expert Power Control 8035 series enables the switching and power measurement of electrical devices over a TCP/IP network, a serial connection, or via a mobile app. The series consists of two variants, each with 8 load outputs on the back. These power ports can be switched separately through a web interface, the serial interface, SNMP, or the button on the device. It supports SNMPv3, SSL, and IPv6, as well as Telnet, Radius, and Modbus TCP. The switched and outlet-metered PDU features overall power measurement along with two integrated energy meters per load output (outlet-metered). The measurement of various electrical parameters allows users to identify and exploit energy-saving potentials at the device level within the IT environment. Additionally, operators receive alerts when leakage currents occur (Type A residual current measurement). This enables preventive maintenance measures before any downtime occurs.
Applications:
Industrial environments: production facilities, warehouses, or manufacturing rooms
IT installations: technical rooms, data centers, 19" racks, or server rooms
AV environments: huddle rooms, conference rooms, theaters/auditoriums, LED walls, or digital signage systems.
UPS accessories
CHF681.–
Gude 8035-1 Expert Power Control NET 8x C13, measurement per port, 2xsensorport
Product order
See all products