Best selling Single board computer kits from Lilygo

This page always stays fresh and updates automatically.

1. Lilygo T-Deck Plus ESP32-S3

Discover the powerful LilyGo T-Deck Plus with the ESP32-S3 and integrated 868MHz LoRa technology for meshtastic communication. The module offers a high-quality, 2.8-inch display for the clear display of messages, position data and other information. A new feature is the external, flexible 15 cm LoRa antenna, which significantly improves the range and reception quality and can be positioned flexibly to ensure optimum signal strength. The desired Meshtastic firmware can be installed quickly and easily via the Meshtastic Web Flasher. This module is ideal for robust communication in areas without mobile phone coverage, during outdoor activities or in disaster situations. Thanks to the simple integration into the Meshtastic network, you can quickly set up an independent, decentralised communication network.

Features:
- ESP32-S3 microcontroller with high performance and low power consumption
- Integrated 868 MHz LoRa module
- Flexibly positionable external 15 cm antenna
- Large, clear 2.8 inch colour display
- Compatible with the Meshtastic firmware
- USB-C connection for easy power supply and programming
- Expansion options thanks to numerous GPIO pins

Technical data:
- Manufacturer SKU: H736-03
- Processor: ESP32-S3 Dual-Core 32-Bit
- Antenna: External flexible 15 cm antenna
- Integrated battery: 2000mAh
- Battery ADC PIN: IO04
- LoRa module: 868MHz
- Display: 2.8 inch TFT touchscreen
- Connectivity: WiFi, Bluetooth and LoRa
- Power supply: USB-C, battery operation with charging function
- GPIO pins: 21 expandable pins
- Memory: 16 MB flash, 8 MB PSRAM
- Onboard functions: GPS, TF Card, microphone, loudspeaker
- Supported software: Arduino IDE, PlatformIO, Meshtastic
- Operating voltage: 3.7V-4.2V (battery operation), 5V (USB)
- LoRa: Lorachip: SX1262 EU868
- Transmission power: +22dBm. 

2. Lilygo T-Embed CC1101 Plus ESP32-S3

The LilyGo T-Embed Plus CC1101 is a compact and powerful hacking gadget that is ideal for hobbyists, tinkerers and tech nerds. The device has a 1.9 inch IPS colour display and a mechanical rotary encoder with push button for intuitive operation. The integrated CC1101 transceiver covers multiple sub-GHz bands and is suitable for telemetry, remote control and wireless protocol experiments. The PN532 chip enables NFC and RFID functionality according to ISO 14443A/B and MIFARE standards. Audio functions including microphone and I2S output extend the range of applications for recording and playback projects. The board offers 16 MB flash and 8 MB PSRAM for graphical user interfaces and complex applications. Power is supplied via USB-C or a 3.7 V LiPo battery; an integrated charge controller and battery monitor are available. The open hardware design allows the use of Arduino IDE and PlatformIO as well as the installation of custom firmware such as Bruce. Thanks to its compact design, the board is suitable for both mobile projects and stationary prototypes. Compared to variants without NFC, this version is additionally equipped with an NFC sticker and a bag of screws, which are included in the scope of delivery.

Technical data:
Manufacturer: LilyGo
Manufacturer SKU: K268-A
Microcontroller: ESP32-S3-WROOM-1, Dual-Core LX7, 240 MHz
Flash/PSRAM: 16 MB / 8 MB
Radio chip: CC1101 (Sub-GHz 300-928 MHz)
NFC module: PN532
nRF24L01 (2.4 GHz radio module)
Display: 1.9 inch IPS ST7789V, 320 × 170 pixels
Battery: 3.7 V 1300 mAh LiPo
Charging chip: BQ25896
Battery monitor: BQ27220
LEDs: 8 × WS2812 RGB
Audio: Microphone, speaker connection (I2S-compatible)
Interfaces: SPI, I²C, UART, USB-C, GPIO
Infrared: Transmit and receive
Programming environments: Arduino IDE, PlatformIO
Compatibility: Windows, Linux, macOS
Dimensions: 96 × 39 × 30 mm
Weight: 120 g. 

3. Lilygo T3S3

The LILYGO T3 S3 LoRa development board is a powerful and compact solution for developers looking to create innovative IoT applications. Equipped with an ESP32-S3 microcontroller and a Semtech SX1262 LoRa transceiver, it enables communication over long distances while maintaining low energy consumption. The board supports the EU868 frequency band and offers a fully integrated Wi-Fi and Bluetooth 5.0 platform, making it ideal for developing connected devices. A 0.96-inch OLED display allows for direct data and status information display, eliminating the need for external hardware. With support for Meshtastic, the board can also function as a node in decentralized mesh networks, further enhancing its flexibility and application possibilities. The easy expandability through a microSD slot and various interfaces makes the T3 S3 a versatile choice for developers.

- ESP32-S3 microcontroller for powerful applications
- LoRa transceiver for long-range, energy-efficient communication
- Onboard OLED display for direct data display
- Versatile expansion options through microSD slot and I2C sockets. 

4. Lilygo T-Echo TTGO Meshtastic 868MHz

This is a LoRaWAN APRS tracker from LilyGo. The T-Echo is a continuation of the T-Beam series. The T-Echo has a L76K multi-system GNSS module which measures the position to an accuracy of 2m and then transmits it via a SX1262 LoRa transceiver. The integrated nRF52840 MCU offers Bluetooth 5.0, Bluetooth Mesh, Zigbee and ANT connectivity. In addition, it can communicate via all common interfaces such as UART, SPI, I2C, I2S, QSPI, TWI and PDM. A 1.54 inch e-paper display shows you all the necessary information with very low power consumption. Together with the integrated 850mAh Li-Po battery, this enables a much longer runtime compared to an OLED display. The module has an NFC sensor on the underside, which you can use to conveniently refresh the e-paper display with your mobile phone, for example. The module is programmed via a USB-C port.

Features:
868MHz LoRa APRS Tracker
Bluetooth 5.0, Bluetooth Mesh, Zigbee, ANT, 802.15.4 and Thread connectivity
L76K GPS module, position measurement accurate to 2m
1.54 inch low power e-paper display
Reset, boot and 1x programmable touch button
NFC sensor for display refresh
Sturdy ABS housing

Technical details:
Manufacturer: LilyGo
Manufacturer SKU: H506
MCU: nRF52840
Flash: 2MB
RAM: 256KB
Bus Interfaces: UART, SPI, TWI, PDM, I2S, QSPI
Wireless connectivity: Bluetooth 5.0, Bluetooth Mesh, Zigbee, ANT, 802.15.4 and Thread
LoRa transceiver: SX1262
Frequency: EU868MHz
Display size: 1.54 inch
Grayscale: 2
Full Refresh: 2s
Resolution: 200x200
RTC Chip: PCF8563
GPS Module: L76K
Position Tolerance: 2m
USB Interface: USB-C
Touch Button: TTP223
Expansion: 10pin BTB expansion socket
Dimension: 66 x 53.5 x 24mm
Weight: 131g

Scope of delivery:
1x LilyGo T-Echo TTGO Meshtastic 868MHz
1x 868MHz antenna
1x USB-C cable 30cm. 

5. Lilygo T-Echo Braun TTGO Meshtastic 868MHz

This is a LoRaWAN APRS Tracker from LilyGo. The T-Echo is an extension of the T-Beam series. The T-Echo features an L76K multi-system GNSS module, which measures position with an accuracy of 2 meters and subsequently transmits via an SX1262 LoRa transceiver. The integrated nRF52840 MCU offers Bluetooth 5.0, Bluetooth Mesh, Zigbee, and ANT connectivity. Additionally, it can communicate through all common interfaces such as UART, SPI, I2C, I2S, QSPI, TWI, and PDM. A 1.54-inch E-Paper display shows all necessary information with very low power consumption. Together with the integrated 850 mAh Li-Po battery, this allows for a significantly longer runtime compared to an OLED display. The module features an NFC sensor on the underside, which allows the E-Paper display to be conveniently updated with a mobile phone. The module is programmed via a USB-C port.

Recommended Accessories:
Purecrea LoRa 868 MHz Antenna

Features:
- 868 MHz LoRa APRS Tracker
- Bluetooth 5.0, Bluetooth Mesh, Zigbee, ANT, 802.15.4, and Thread connectivity
- L76K GPS module, position measurement accurate to 2 meters
- 1.54-inch low power E-Paper display
- Reset, Boot, and 1 programmable touch button
- NFC sensor for display updates
- Sturdy ABS housing

Technical Details:
- Manufacturer: LilyGo
- Manufacturer SKU: K159
- MCU: nRF52840
- Flash: 2 MB
- RAM: 256 KB
- Bus Interfaces: UART, SPI, TWI, PDM, I2S, QSPI
- Wireless Connectivity: Bluetooth 5.0, Bluetooth Mesh, Zigbee, ANT, 802.15.4, and Thread
- LoRa Transceiver: SX1262
- Frequency: EU868 MHz
- Display Size: 1.54 inches
- Grayscale: 2
- Full Refresh: 2 s
- Resolution: 200 x 200
- RTC Chip: PCF8563
- GPS Module: L76K
- Position Tolerance: 2 m
- USB Interface: USB-C
- Touch Button: TTP223
- Expansion: 10-pin BTB Expansion Socket
- Dimensions: 66 x 53.5 x 24 mm
- Weight: 131 g

Included in Delivery:
- 1x LilyGo T-Echo Brown TTGO Meshtastic 868 MHz
- 1x 868 MHz Antenna
- 1x 30 cm USB-C Cable. 

6. Lilygo T-Beam SUPREME Meshtastic ESP32-S3 868mhz Lora Module with GPS

The T-Beam Supreme Meshtastic ESP32-S3 868MHz LoRa module with GPS from Lilygo is an advanced development board specifically designed for IoT applications. Equipped with a powerful ESP32-S3 dual-core microprocessor, a LoRa SX1262 chip, and a GPS L76K chip, this module offers a variety of features that make it ideal for long-range projects. Support for 2.4 GHz Wi-Fi and Bluetooth 5 (LE) enables flexible wireless communication. With 8MB of Flash and 8MB of PSRAM, the board is well-equipped for most applications. A pre-assembled 18650 battery compartment ensures easy and autonomous power supply. Integration into the Meshtastic network allows for use in open, decentralized mesh networks, making it an excellent choice for innovative IoT solutions.

- EU868MHz LoRaWAN for long ranges
- Integrated GPS for precise location determination
- Pre-assembled 18650 battery compartment for autonomous use
- Support for Meshtastic, an open mesh network
- 8MB Flash and 8MB PSRAM for extensive applications. 

7. Lilygo T-Watch S3 Smartwatch ESP32-S3 with 868Mhz Lora

The LilyGo T-Watch S3 is a versatile smartwatch designed specifically for developers and tech enthusiasts. It combines the functionality of a wearable watch with a powerful development platform based on the advanced ESP32-S3 microcontroller. This smartwatch allows users to experiment with LoRa and ESP32-S3 technologies and realize innovative IoT projects. The T-Watch S3 offers a wide range of features, including Wi-Fi and Bluetooth 5.0 connectivity, an integrated 3-axis accelerometer, and audio capabilities through a microphone and speaker. Its high adaptability makes it ideal for various applications, while the AXP2101 power management chip ensures efficient energy management. Thus, the T-Watch S3 is not only a wearable device but also a powerful tool for creative projects.

- Integrated ESP32-S3 microcontroller for powerful applications
- Supports 868MHz LoRa communication for IoT projects
- Wi-Fi and Bluetooth 5.0 for comprehensive connectivity
- Equipped with a BMA423 3-axis accelerometer
- Includes a MAX98357A microphone and speaker for audio applications. 

8. Lilygo T-Dongle-S3 ESP32 with USB and display

The T-Dongle-S3 is a development board that features an ESP32-S3 Xtensa LX7 microprocessor, Wi-Fi 802.11 b/g/n, and Bluetooth 5 connectivity. With 16 MB of flash memory, a boot button, and a 0.96-inch ST7735 IPS LCD color display (65k), the board allows for the display of various content. The T-Dongle-S3 is compatible with the Arduino IDE, PlatformIO IDE, and Micropython. Developers and hobbyists can find guides and examples.

Features:
Hidden TF card slot
Boot button
High-sensitivity ceramic Bluetooth antenna

Technical Details:
Manufacturer: Lilygo
Manufacturer SKU: K193
MCU: ESP32-S3 Xtensa LX7 microprocessor
ESP32-S3 Flash Memory: 16 MB
ESP32-S3 Wi-Fi: Wi-Fi 802.11 b/g/n
ESP32-S3 Bluetooth: Bluetooth 5.0
Platform: Arduino IDE, PlatformIO IDE, Micropython
Display Model: ST7735 LCD
Display Resolution: 80x160 pixels
Display Diagonal: 0.96 inches
Display Color: 65k full color
Display Interface: 4-Wire SPI
Power Supply: 3.3 V
USB: Type-A
Case Color: Transparent
Dimensions: 58.6 x 17.9 x 8.7 mm
Weight: 19 g

Package Includes:
1x LilyGo T-Dongle-S3 ESP32 with USB and display. 

9. Lilygo T5 S3 E-Paper 3.5 Zoll Pro mit Lora 868Mhz und GPS

With the T5 S3 E-Paper Pro, you get a versatile development board that is ideal for smart applications in sensor technology, IoT, and data collection. The large, energy-efficient 4.7-inch E-Paper display ensures crystal-clear visibility—even in direct sunlight. The integrated GPS module allows for precise location tracking, while the powerful LoRa module (868 MHz) enables stable wireless communication over long distances. The modern ESP32-S3 microcontroller provides strong computing power and supports both WiFi and Bluetooth 5. Thanks to the built-in touchscreen, you can interact directly with the device, and the SD card slot offers ample storage space for your projects. An integrated RTC module ensures that the time is maintained even when the device is turned off. Particularly convenient: the power supply and battery management have been optimized with high-quality chips to guarantee a long runtime. This board is perfect for both developers and hobbyists and offers many expansion options. With the documentation and example codes, you can get started right away.

Technical Specifications:
Manufacturer: Lilygo
SKU: H752-01
MCU: ESP32-S3-WROOM-1
Flash/PSRAM: 16 MB / 8 MB
Display: 4.7" E-Paper, 960x540 pixels, 16 grayscale (ED047TC1)
Touch: GT911 capacitive touch
LoRa Module: SX1262, frequency 868 MHz
GPS: MIA-M10Q module
RTC: PCF85063
E-Paper Power Management: TPS65185
Battery: 3.7 V - 1500 mAh
Battery Management: BQ25896, BQ27220
Connectivity: 2.4 GHz Wi-Fi, BLE 5
Programming Environments: Arduino IDE, PlatformIO (VS Code)
TF card (SD) slot
Operating Voltage: via USB-C or battery connection
Dimensions: 129 x 69 x 11 mm
Weight: 170 g

Included in Delivery:
1x LilyGo T5 S3 E-Paper 3.5 inch Pro with LoRa 868 MHz and GPS. 

10. Lilygo T-Embed CC1101 ESP32-S3 with encoder and display

The LilyGo T-Embed CC1101 is a compact and powerful hacking gadget that is ideal for hobbyists, tinkerers and tech nerds. You get a versatile tool with integrated WLAN, Bluetooth, sub-GHz radio and NFC - at a fraction of the price of the well-known Flipper Zero. The powerful ESP32-S3 microcontroller with dual-core processor and 16 MB flash memory opens up countless application possibilities. The 1.9 inch colour display provides a clear display of your projects and the built-in encoder enables intuitive operation. With the help of custom firmware such as "Bruce", you can unleash the full potential of the board. The combination of sub-GHz transceiver, NFC module and audio functions makes this device a versatile companion for prototyping, pentesting and creative projects. The LilyGo T-Embed CC1101 is just the thing for anyone who likes to develop and break new ground. It is ready for immediate use and open for expansion - whether as a remote control, RFID scanner or DIY multitool.

Application examples:
DIY remote control with IR and RF signals for smart home devices
NFC/RFID access control system or emulator
Sub-GHz scanner or transmitter for wireless experiments

Technical specifications:
Manufacturer: Lilygo
SKU: K230-A
Microcontroller: ESP32-S3-WROOM-1
Flash/PSRAM: 16 MB / 8 MB
Sub-GHz module: CC1101
NFC module: PN532
Display: 1.9" ST7789V, IPS, 320x170
Battery: 3.7 V 1300 mAh LiPo
Charging chip: BQ25896, battery management BQ27220
LEDs: WS2812 (8 RGB LEDs)
Audio: Microphone, speaker connection (I2S-compatible)
Interfaces: SPI, I2C, UART, USB-C
Infrared: Transmit & receive possible
Programming environments: Arduino IDE, PlatformIO
Compatibility: Windows, Linux, macOS
Dimensions: 96 x 39 x 30 mm
Weight: 120 g. 

Product order
See all products

Relevant lists