Best Showtec products in the Lighting technology mounting category

On this page you'll find a ranking of the best Showtec products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Showtec Fog fluid

This water-based fog fluid was developed especially for entertainment fog machines and produces a white, harmless fog of high chemical purity. This odourless fluid leaves no oily residue and is absolutely harmless to health. It is suitable for almost all fog machines. Attention: Keep away from children. Do not swallow liquid. 5 litres. 

2. Showtec Sling 1 tone WLL. Black 1m

Showtec now offers certified straps for the safe erection and mounting of trusses, speakers, etc. The straps are made of polyester and all models are black, making them discreet for the audience. They are available with a load capacity of 1 and 2 tons. Please note that straps must be recertified every year in accordance with EEC regulations. 

3. Showtec Sling 2 Ton WLL. Black 1.5m

Showtec now offers certified straps for the safe erection and mounting of beams, speakers, etc. The straps are made of polyester and all models are black so that they are unobtrusive to the audience. They are available in 1 and 2 tone WLL. Please note that harnesses must be recertified every year in accordance with EEC guidelines. 

4. Showtec elastic bands

Black.

5. Showtec Safety Light Duty

Movable lighting, picture and sound equipment must be secured against falling by two independently acting devices. Typical movably suspended or fixed devices used in event and production technology are e.g. spotlights, effect devices, loudspeakers, supporting structures as well as trusses, mounting brackets, mirror balls, monitors, projection devices etc. In the cases described here, a safety element (second independent safety device) consists of wire rope, rope end connection and connecting link. When dimensioning the elements, the dynamic forces when absorbing the load have been taken into account. Safety ropes consist of a wire rope according to DIN 3060 (round strand rope 6 x 19 standard, with fiber core) with a nominal strength of the wires of 1770 N/mm2. Quick connection links, chain links, screw carabiners or shackles can be used as links in safety ropes. A safety rope must be attached in such a way that the drop height of the object to be secured is as low as possible. The fall height of 20 cm must not be exceeded. When an object falls into the safety element, there is an impulse load for the rope. This impulse force is partly absorbed by the rope elongation. When securing on movable lamp hangers, the safety ropes must be attached in such a way that the height of fall of 5 cm is not exceeded, so that the impulse forces on the lamp hanger do not become too great when a load falls. A safety element which has once been loaded or apparently damaged must not be used again. The safety rope must not be used as a connection rope for general hoisting operations. 

6. Showtec Safety Cable 50 cm

Reaching new heights with safety cables: Par cans, speakers, moving heads, disco balls, trusses, mounts, projectors, and flat screens are various products with one thing in common. Whenever they are used, either statically or as a moving effect, in elevated positions or over people or crowds, you are required to use an independent secondary safety device in accordance with BGV-C1 and VGB regulations to ensure the safety of your venue's visitors. In all these cases, safety cables must be used to secure your equipment and ensure that secured static equipment does not fall more than 20 cm in an emergency, or that moving equipment does not fall more than 5 cm, to prevent excessive impact forces. Just as important as the safety cable itself are the links, carabiners, or catbiners, as the whole system is only as strong as its weakest link. That’s why our safety cables are also equipped with certified connectors to ensure safe use, as long as the cable and the link are handled according to their specifications. Safety cables can be used in single or double wire configurations to carry and secure their specified load. Please check the specifications with each cable to find the one that perfectly meets your needs. One important point: safety cables are intended to secure your equipment and should not be used for lifting devices. For this purpose, you can use our well-equipped Lodestar series. 

7. Showtec 8-Channel Chainhoist Controller

The Chainhoist Controller from Showtec is a device for controlling all commonly used direct-controlled chain hoists, such as the CM Lodestar. Each of the 8 hoists can be individually activated or deactivated and raised or lowered. On the back, the device is equipped with 4x 4-pole CEE connectors and 2x 16-pole multipin connectors for a breakout box. 

8. Showtec Eurotrack -wall arm 100mm

Black
Special Eurotrack wall arm including connecting screw and screws.

9. Showtec Corner 60 degrees

The Milos PRO-30 truss is made of 50 mm aluminum tubing with a thickness of 2 mm and 16 mm braces. This is the most commonly used construction system for nightclubs, stages, theaters, and many other applications. The PRO-30 truss is available in the following configurations: 2-point step system (FS, GS, PS), 3-point triangle system (FT, GT, PT), and 4-point angle system (FQ, GQ, PQ). The system elements are connected by conical connectors and pins. Milos offers three different coupling systems with varying compatibility, as outlined in the following overview. All Milos PRO-30 truss systems are TÜV certified.

- F-Truss compatible with Prolyte systems (Ø 27.8 mm)
- G-Truss compatible with Global and Euro systems (Ø 29.0 mm)
- P-Truss compatible with standard Milos beam systems (Ø 29.8 mm)

Each truss piece (length or corner piece) is always supplied with a complete connection set (pins, bolts, and R-springs) for one side. The black truss we offer is powder-coated in RAL9005 color. 

10. Showtec Corner 135°

The Milos PRO-30 truss is made of 50mm alu pipe with a thickness of 2mm and 16mm braces. This is the most used construction system for discotheques, stages, theaters and many more applications. The PRO-30 truss is available in the following models: 2 point Step system (FS, GS, PS), 3 point triangle system (FT, GT, PT) and 4 points square system (FQ, GQ, PQ) The system elements are joined together through conical connectors and spigots. Milos offers three different coupling systems with different compatibility, shown in the overview below. All Milos PRO-30 truss systems are TÜV certified. · F-truss compatible with Prolyte systems (Ø 27.8mm). · G-truss compatible with Global & Euro systems (Ø 29.0mm). · P-truss compatible with standard Milos truss systems (Ø 29.8mm). Each truss piece (length or cornerpiece) is always delivered including a complete connection-set (spigots, pins and R-springs) for one side. And the black truss we offer, is powder-coated with colour RAL9005. 

See all products