Best Showtec products in the Lighting controllers category
On this page you'll find a ranking of the best Showtec products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Showtec Single DP-1
One channel DMX Dimming/Switch Pack . 512 DMX-channels. Wall / Truss mounting. 50 mm dimming slider. Dim and switch. Dimming pre-set. Dimming limit. Capacitive load 10A, Inductive load 5A.
2. Showtec NET-2/3 Pocket
The Showtec NET-2/3 Pocket and NET-2/5 Pocket nodes are cutting-edge network routing devices which convert ArtNET or sACN to DMX512 and back. The power input can be provided by POE which makes the 12V power supply superfluous. A maximum of 1024 channels can be transported over a single CAT5. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front. Settings can also be arranged via the webbrowser possibility, which gives you (remote) access through your computer or laptop and your network. Default login account: Admin, password: Admin.
3. Showtec Single WDP-1 Pro
The Single WDP-1 is a one channel DMX dimmer/switch with built-in Wireless DMX receiver. The wireless signal can also be distributed on the XLR output in order to give signal by many other devices by cable. It is wall- truss- and fixture mountable which makes it suitable in any location. It has both dim- and switch mode and can be controlled manually on the 50mm fader.
4. Showtec Edison Bar E6 DMX LED dimmer with 6 x E27 Socket
The Showtec Edison Bar E6 is a DMX LED dimmer with 6 x E27 socket fit for six LED light sources up to 8 watt, suitable for indoor venues. Its output can be controlled manually and via DMX in either Manual, Auto run and Sound-controlled mode with many available built-in programs. The Edison Bar E6 comes with mounting brackets for quick rigging on stage. An extension cable and a variety of design light bulbs are optional.
5. Showtec DB-1-8/RDM
The DB models from Showtec are universal DMX-512 splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional “Through” port. They can be mounted in any 19” rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to show the DMX signal status of each output and input. There are four models available, DB-1-4 with or without RDM which has 4 outputs and 3 & 5 Pole XLR connectors, and the DB-1-8 with or without RDM which has 8 outputs with 3P XLR connectors.
6. Showtec AirDrive 2.4 Pocket 5-pin
- Wireless DMX G3 and G4 transmitter modes and G3 and G4S receiver modes
- Quick and easy setup
- M10 and 3/8" mounting thread
- Compatible with the Showtec AirDrive 2.4 IP
- Universal power supply included
The Showtec AirDrive 2.4 Pocket is a compact DMX512 transceiver that can be switched between transmitter and receiver function. It is designed for quick and easy setup of a wireless DMX512 connection. In transmitter mode it can transmit in G3 or G4 mode, in receiver mode it is suitable for G3 and G4S mode. Two or more devices are required for a working setup: one device as a transmitter and one or more devices as receivers paired with the transmitter. There is no limit to the number of receivers that can be paired with the transmitter.
The AirDrive 2.4 Pocket has an M10 thread for easy clamp mounting and a 3/8" thread for easy microphone stand mounting, so that the AirDrive can be quickly and easily lifted above the audience if required (e.g. when you are in the FOH position). For optimum reception and maximum range, line-of-sight operation is recommended. The AirDrive 2.4 Pocket is compatible with the AirDrive 2.4 IP. It is supplied with a universal power supply and is available with 3-pin or 5-pin DMX XLR connectors.
7. Showtec AirDrive 2.4 Pocket 3-pin
- Wireless DMX G3 and G4 transmitter modes and G3 and G4S receiver modes
- Quick and easy setup
- M10 and 3/8" mounting thread
- Compatible with the Showtec AirDrive 2.4 IP
- Universal power supply included
The Showtec AirDrive 2.4 Pocket is a compact DMX512 transceiver that can be switched between transmitter and receiver function. It is designed for quick and easy setup of a wireless DMX512 connection. In transmitter mode it can transmit in G3 or G4 mode, in receiver mode it is suitable for G3 and G4S mode. Two or more devices are required for a working setup: one device as a transmitter and one or more devices as receivers paired with the transmitter. There is no limit to the number of receivers that can be paired with the transmitter.
The AirDrive 2.4 Pocket has an M10 thread for easy clamp mounting and a 3/8" thread for easy microphone stand mounting, so that the AirDrive can be quickly and easily lifted above the audience if required (e.g. when you are in the FOH position). For optimum reception and maximum range, line-of-sight operation is recommended. The AirDrive 2.4 Pocket is compatible with the AirDrive 2.4 IP. It is supplied with a universal power supply and is available with 3-pin or 5-pin DMX XLR connectors.
8. Showtec Showmaster 24 MKII
The Showmaster 24 MKII is a 2-banks 12 fader, 1-bank 24 fader mixing console, it controls DMX and has also the capability to be used with MIDI protocol to allow real-time programs. The Showmaster 24 MKII controls 2x 12 channels (single bank) or 24 channels. The Showmaster 24 MKII can program 48 scenes or chases of 999 steps or a loop with a total of 11988 steps. Programs can be run automatically or by external or internal music-input. It is also possible to control your lightshow by the built in MIDI-interface to allow a real-time live-show to your music. Incl. side panels. Incl. 1 power adapter.
9. Showtec ColorCue 1
The Showtec ColorCue 1 is an intelligent 1-fader LED DMX controller with 6 channels for easilly controling the light output of LED fixtures with up to 6 colours (RGBWA-UV), suitable for any venue. Its 6 rotary encoders enable you to quickly tune the lights to your desired color, from 3-colour RGB to 6-colour RGBWA-UV. The ColorCue 1 enables you to create your own 12 preset colours and you can choose between 12 fixed colours. You can create up to 12 programs (chases) with each up to 99 steps for changing colours and effects in a loop. The chases can be controlled in Manual, Auto run or Sound-controlled mode.
10. Showtec Truss booster IP 1-4 3 pin
The Booster IP 1-4 is a compact and sophisticated device for splitting and amplifying DMX or RDM signals. It is attached to trusses or pipes using the bracket or Velcro straps that can be pulled through the four slots. A rubber ring on both sides of the sturdy housing makes the booster ideal for mobile applications, while the IP65 protection rating also makes it suitable for outdoor use.
