TE Sensors DDPI FORMF SN=5MM NO PNP OPT FLUSH 10-3

Telemechanique Sensors proximity switch XS7F1A1PAL01M8

Manufacturer: Telemechanique Sensors
Designation: Proximity switch
Type: XS7F1A1PAL01M8
Sensor width: 15 mm
Sensor height: 32 mm
Sensor length: 8 mm
Mechanical installation condition for sensor: Flush
Switching distance: 5 mm
Suitable for safety functions: No
Switch function type: Normally open
Switch output type: PNP/PNP
Electrical connection type: Radial cable
Number of semiconductor outputs with signaling function: 1
Actuation type: Metallic target
Interface type: None
Interface type for safety-related communication: None
Housing design: Rectangular
Housing coating: Other
Cascadable: No
SIL according to IEC 61508: None
Performance level according to EN ISO 13849-1: None
Max. output current at safe output: 100 mA
Supply voltage: 12 to 24 V
Rated control supply voltage Us at DC: 12 to 24 V
Voltage type: AC/DC
Switching frequency: 2000 Hz
With monitoring function for connected devices: No
Housing material: Plastic
Pressure resistant: No
Explosion protection category for gas: None
Explosion protection category for dust: None
Interference resistance against magnetic fields: Resistant to static and alternating magnetic fields

This OsiSense XS flat (15 x 32 x 8 mm) inductive proximity sensor features a PBT housing. It has a switching distance of 5 mm, a normally open PNP output, and an M8 connector. It operates with a supply voltage of 12 to 24 VDC. This universally applicable rectangular inductive proximity sensor can be directly mounted on a surface thanks to its 2 screw mounting points and is C-Tick, CSA, UL certified.