Snapmaker 2.0 Accessories Air Purifier

Snapmaker 2.0 Air Purifier

General Features:

• Custom filter cartridge for PM and VOC filtration
• High filtration efficiency of 95.9% for PM0.3
• Real-time monitoring of filter cartridge status and lifespan
• Fan speed control
• Colored status light
• Durable all-metal construction
• Compatible with all current and future Snapmaker 2.0 addons

The air purifier must be used in conjunction with the Snapmaker 2.0 enclosure.

A new level of air safety:
Chemicals such as PM (particulate matter) and VOCs (volatile organic compounds) can be released when 3D printing or laser engraving with certain materials. These can be further filtered with a Snapmaker 2.0 air purifier.

Exclusive filter cartridge:

• Filter detection
• Filter lifespan detection
• Fan speed regulation
• Status light
• All-metal construction

The exact filter cartridge you need:
Custom filter cartridge for your Snapmaker 2.0 with five different filter layers combined into one to absorb emissions generated during laser engraving or 3D printing.

G4 filter for coarse filtration:
Targets relatively larger particles (≥ 5 μm in diameter). It filters out more than 90% of PM10 and PM5.

F9 filter for finer filtration:
Effective for particles with a diameter of 1 μm or more. It filters out more than 95% of PM10, PM5, and PM2.5.

Custom activated carbon filter:
A dense pack of activated carbon is added to absorb VOCs that cannot be captured by other filters. Unpleasant odors are no longer a problem.

Ultra-dense HEPA H13 filter:
Two layers of a 70 mm thick HEPA H13 filter as the final filtration stage. They are capable of capturing up to 99.97% of airborne particles of all sizes, including PM0.3, which are known to be the most penetrating particles in the air.