productDetailPageRelayQuery

Roline

Category 6 network cable with shielded RJ-45 connectors on both ends. Connection or patch cables for structured building cabling. Suitable as patch cables in patch panels or as device connection cables and intended for use in LANs.

Network cable

DasWarenhaus

Kaufsignal.ch

JACOB

Network cables

Patch cable type

Contact assignment

Item number

Key specifications

Manufacturer

Manufacturer no.

General information

Cable colour

Colour

Specific material description

Material of the isolation

Material

Connection A

Connection B

Cable Application

Cable design

Plug type

American Wire Gauge, abbreviated AWG, also known in English-speaking countries as Brown &amp; Sharpe wire gauge, is a coding for wire diameter. It identifies electrical cables made of strands and solid wire and is mainly used in electrical engineering to indicate the cross-section of wires.
The American Wire Gauge system is based on the manufacturing process of wires and expresses the number of drawing steps of the wire. Because (copper) wire hardens during the drawing process, there is a risk of tearing above a limit value. Therefore the extent of drawing is limited. Only after heat treatment (soft annealing) can the wire be drawn further. With each draw, the wire becomes thinner and longer - with the same volume.

American Wire Gauge (AWG)

Frequency

Cable properties

A patch cable or patch cord (sometimes patchcable or patchcord) is an electrical or optical cable, used to connect ("patch-in") one electronic or optical device to another for signal routing. Devices of different types (ie: a switch connected to a computer, or switch to router) are connected with patch cords. Patch cords are usually produced in many different colors so as to be easily distinguishable, and are relatively short, perhaps no longer than two metres. Types of patch cords include microphone cables, headphone extension cables, XLR connector, RCA connector and ¼" TRS connector cables (as well as modular Ethernet cables), and thicker, hose-like cords (snake cable) used to carry video or amplified signals. However, patch cords typically only refer to those short ones used with patch panels.

The cable type, describes the structure of a network cable. Fiber optic cables are suitable for distribution over longer distances (up to 80 km) and are resistant to interference. Copper cables can be used for distances up to 100 m and are cheaper to purchase.

Patch cable Features

http://de.wikipedia.org/wiki/Daten%C3%BCbertragungsrate

Max. data transfer rate

Patch cable properties

The cable category describes the performance of a network cable. Due to the fact that the categories are downward compatible, the higher categories automatically cover the ones below.

http://en.wikipedia.org/wiki/Twisted_pair_cable

Cable category

The contact assignment provides information on how the network cable can be used. An uncrossed cable can be used to connect terminals to the network, while a crossed cable can be used to connect two terminals.

The shielding of a network cable ensures that interaction with other devices is reduced, thus improving electromagnetic compatibility.

Shield

Twisted-pair cable properties

The sales unit is the grouping of article units into a saleable unit, which can be the smallest unit or a grouping for sale to the customer.

Roline Network cable

Cable category

Colour

Length

Shield

Key specifications

Key specifications
Patch cable type	Copper cable
Contact assignment	straight
Item number	6147446

Roline Network cable

Cable category

Colour

Length

Shield

Description

Specifications

Key specifications

All Suppliers

Returns

Warranty

Price trend