CHF285.–
Ubiquiti UniFi Cloud Gateway UCG-Fiber
Questions about Ubiquiti UniFi Cloud Gateway UCG-Fiber
What would you like to know?
0 questions and answers
The offer has been deactivated to check for potential errors.
Up to 2TB NVMe SSD can be installed.
However, none are included.
Former employee
1 year ago
Yes, that was a mistake, thank you for pointing it out, we have taken the article offline to fix the error.
Helpful answer
Yes, that could work (depending on the optics). I tried it with the SFP module from Fiber7 (TL-SM321B from the Fiber7 bundle from Digitec) and it worked perfectly. However, I'm not sure if other modules will work as well.
1 year ago
Helpful answer
At the time of writing, all indications are that we are unlikely to be able to obtain this item from our suppliers. We apologise for any inconvenience this may cause.
Whether you can replace the FRITZ!Box you received from Sunrise with this router must be clarified directly with Sunrise.
Unfortunately, we do not have any personal user experiences with this product, but I would be happy to forward your question to the community; perhaps a community member can help you with it.
Yes, technically a Zyxel PMG3000-D20B can work with the Ubiquiti UCG-Fiber. However, whether it will work with your future E.ON connection primarily depends on the PON technology used (GPON/XGS-PON) and the authentication data of the connection.
We do not have personal experience with this item, but I'm happy to list it here, and perhaps a user can assist you.
The prerequisite is that your Wingo copper connection supports the use of your own router and that you have the necessary access data.
Unfortunately, with your current copper connection, you cannot use the UCG-Fiber directly as your main router on the telephone line, as this requires a VDSL/G.Fast modem. Once your connection has been upgraded to fibre, you’ll be able to use the UCG-Fiber via the SFP port or a compatible module, depending on the fibre technology used.
This model does not have a built-in modem for a direct connection from the fibre optic connection, so you need a modem in between. You can use a modem from the supplier and then establish a connection to the gateway via 10G Ethernet and a module like this: https://www.digitec.ch/de/s1/product/ubiquiti-sfp-modul-uacc-cm-rj45-mg-transceiver-23317486
Helpful answer
It really depends on your use case.
Do you want to record a lot of videos with multiple cameras?
Rather take a NAS rated SSD.
How long should the data be sorted?
The longer, the more capacity you need.
How critical is the data?
If not so relevant if lost, go for a cheap solution.
I took a 256GB model that was left over after a SSD upgrade in the notebook.
It's fine for just expanding the log space of the firewall.
And I agree to the prior answer from Nalply, don't take power consuming models, like gaming SSDs. They will get too hot.
Helpful answer
Hello, here is the documentation I made for Wingo (in French)
https://infra-docs-1e63a9.gitlab.io/network...
I can't answer that...
I have an Sfp+ - XGS-Pon in Cloudgateway Fibre which replaces my provider modem. Cloudgateway Fibre serves as a router and firewall...
Helpful answer
I ordered mine through fs.com. They have a configurator there, and if you do it carefully, it should work. I bit my fingernails but it worked without any problems. fs.com supports Ubiquiti.
I ordered it directly from the Ubiquiti shop... unfortunately it's not currently available from Digitec.
Galaxus
8 months ago
Yes, it is possible to use one of the two Ethernet WAN ports as a LAN connection. This means that 5 ports are then available for LAN, as all 7 ports can be flexibly configured as WAN or LAN.
Automatically generated from the .
I personally use my router in bridge mode and use RJ45 port as main WAN for UCG.
Plugging your Zyxel module into the UCG might work but you need to make sure Swisscom approves your device to be directly connected to their network.
I know how it operates for Sunrise, I guess Swisscom will be the same.
Ubiquiti doesn't really like SFP+ module from another manufacturer. They sell theirs very cheap around 20 CHF
Yes, everything went tip-top. If you have previously operated your Cloudkey in multisite mode, then make a site export and load this into the Cloudgateway.
I did exactly the same a few days ago.
Old CloudKey, site export. Then imported to Cloudgateway, done.
In the web interface at the bottom left, click Settings (gear wheel) --> Internet --> Select your WAN connection --> IPv6 Connection
Helpful answer
So you have the TP-Link optics via the Fibre7 part (the thing is from Zyxel and is a bridge) on the WINGO? (Swisscom)
The WINGO connection is then guaranteed to be an XGS-PON. You can't simply connect the optics to the Unifi, as the Unifi can't fish out "your" data stream from the XGS-PON clutter.
Don't torture yourself... WINGO->TP-Link-Optik->to Zyxel-Bridge-> via copper to Unifi.
WINGO access data goes into the bridge (if you have the data at all?)
This way, the Unifi only sees ready-to-use Internet and can take care of the routing.
Galaxus
11 months ago
Helpful answer
For a 10 Gbit/s connection from Init7, you do not need an additional modem with this router, as it is a no modem router with a fibre optic connection. The router has a 10 Gigabit SFP+ WAN port that can be connected directly to the fibre optic connection. This means you can use your 10 Gbit/s line directly without having to connect any other devices. Note that the router also supports multi-WAN and VPN, which offers additional flexibility.
Automatically generated from the .
No, UNIFI does not support DECT or VoIP. You need a device that supports VoIP DECT, e.g. a FritzBox, which can then also be operated on the UNIFI fibre.
Helpful answer
I was considering trying that, and had found some promising reddit threads. When I received the AX7501, I realized the optic is designed in a non-removable way, so I didn't bother to try yet. The set-up is currently working quite okay with the UCG-Fiber behind the AX7501 (in DMZ mode).
I had bookmarked these discussions with interesting links:
* https://www.reddit.com/r...
* https://www.reddit.com/r...
30 of 52 questions