CHF193.–
TP-Link Deco X50-5G (1-pack)
Questions about TP-Link Deco X50-5G (1-pack)
What would you like to know?
0 questions and answers
Helpful answer
Works very well without an external antenna. Unfortunately, I have not yet found a suitable external antenna.
Bad timing :'(
Helpful answer
I can only imagine achieving a slight reduction here to a limited extent.
An outdoor model would be better here.
The question is how the devices in the house want to connect to it. If it happens via WLAN, it makes little difference. Especially if it already works as it is.
If a connection is primarily required via LAN, you can also use the Fritz.Box 6860 5g.
Helpful answer
No, there is no longer any danger here. The decos were not affected either: https://www.heise.de/news... and the list of affected devices: https://jvn.jp/en...
Decos are not listed.
Unfortunately, I could not find any information on different revisions under EAN 4897098687949.
According to my research and the manufacturer's specifications, the router has a "bridge mode". If the "version" refers to the hardware version, we unfortunately cannot guarantee which version will be supplied. As long as there are still copies of previous hardware versions in circulation, there is a chance that you will receive one.
Preferably none at all - the Deco generally behaves much better indoors without an antenna and also copes well with reflections / attenuation. I installed a Poynting directional aerial and had to return it, unusable
Please contact our Galaxus assistant in this regard so that we can help you individually with your request: https://www.galaxus.ch/help
Helpful answer
Not only a physical SIM
Helpful answer
Hello,
I have exactly this configuration at home, where I have connected my PS5 and my TV (Netflix, YouTube, etc.) directly to the box via a cable and everything works very well without latency, with a 5G signal of 4/5 (in town).
Best regards
According to our supplier data, this is version 1.
Helpful answer
You have to connect to the device via laptop and LAN cable and see what is configured.
You may also need an external antenna so that it has 4G/5G.
Galaxus
3 months ago
Yes, a pure bridge mode is possible so that you can leave the WiFi to your ASUS Mesh. The Deco X50-5G supports bridge mode, in which it acts purely as a modem and does not perform any mesh or router functions. Note that in bridge mode, no mesh functionality with other Deco devices and no firmware updates are possible. It is important to note that this function is primarily available for hardware version V1 with firmware 1.1.5; there is currently no clear support or date for Bridge Mode for the V2 version.
Automatically generated from the .
Galaxus
3 months ago
Helpful answer
As a Wi-Fi router without a SIM card, the device cannot be used directly as a Wi-Fi repeater for an existing Wi-Fi network (e.g. from a campsite). It is primarily designed as a 5G router with a SIM card to provide Internet via the mobile network.
The Deco X50-5G does not support a direct connection to the campsite's Wi-Fi network in order to pass this on to several devices via its own router as a standard function. The device is not designed to log into an existing WLAN as a client and then pass it on as an access point.
The Deco X50-5G is therefore not suitable if you only want to buy access to the campsite's WLAN and then distribute it to several devices via the router. It needs its own internet source, ideally a 5G SIM card, to set up its own Wi-Fi to which you can then connect multiple devices.
To summarise:
- The router does not work as a Wi-Fi repeater or client that redistributes an external Wi-Fi network without a SIM card.
- It is intended for operation with a 5G SIM card to set up its own Wi-Fi.
- This model is not suitable for using the campsite Wi-Fi with only one access point and distribution to multiple devices.
So if you only want to use the campsite's Wi-Fi on campsites, you have to buy an access point for each device there or use another device that explicitly functions as a Wi-Fi repeater/client for existing Wi-Fi.
Automatically generated from the .
Helpful answer
Hello, yes I bought the sen router and have installed a second Sunrise SIM card. Works perfectly, easy configuration via APP or web interface. I use the 5G router as a mobile internet connection in a holiday flat. 55" TV, Netflix, surfing etc. also runs perfectly via this router. Has got stuck twice in 8 months. Power off/on and OK again.
Yes, the WIFI is gone...
Galaxus
4 months ago
Helpful answer
This router works by using a 4G/5G SIM card to connect to the Internet via the mobile network, ideal for a cottage without fibre optics but with good 5G coverage. Yes, you need to take out a mobile subscription with an operator and insert the SIM card into the router to access the Internet.
The router has a SIM card slot and can be configured in 4G/5G router mode using the Deco application. Once the SIM card has been inserted and activated, it creates a high-performance Wi-Fi 6 network throughout the home, with speeds of up to 2402 Mbit/s at 5 GHz and 574 Mbit/s at 2.4 GHz.
To sum up, to use this router in a cottage without fibre :
- Take out a 4G/5G mobile subscription with a compatible SIM card.
- Insert the SIM card in the router.
- Configure the router using the Deco application.
- Enjoy a high-performance Wi-Fi mesh network thanks to built-in Wi-Fi 6 and 5G technology.
Automatically generated from the .
IMHO no, the device works with a 9V power supply.
Unfortunately, the router does not support built-in VPN:
https://www.tp-link.com/ch...
Galaxus
5 months ago
Helpful answer
The router is simlock-free, i.e. it is not tied to a specific mobile phone provider. You can insert and use any SIM card. There are functions for SIM PIN management and network band blocking (cell lock), but no restrictions due to a SIM lock.
Automatically generated from the .
Galaxus
9 months ago
Helpful answer
Yes, this router works with a Galaxus Mobile SIM card. It supports nano SIM cards and offers 5G support, which makes it easier to install and use.
Automatically generated from the .
Galaxus
10 months ago
The Deco X50-5G is equipped with two RP-SMA connectors (female) for optional external mobile antennas, enabling 5G signals to be enhanced. For best performance, we recommend installing two external antennas compatible with the device's working frequencies.
Automatically generated from the .Galaxus
10 months ago
Helpful answer
To use a mesh network with the Deco X50-5G and the X50 Deco devices, you do not necessarily have to connect the X50-5G to the X50 Deco devices by cable. Instead, you can use the X50-5G as a central device and connect the X50 Deco devices to it wirelessly to extend the Wi-Fi network. The X50 Deco devices communicate with each other via the mesh network to ensure a seamless connection. So you don't need any additional cable connections between the devices.
Automatically generated from the .Galaxus
10 months ago
Helpful answer
Yes, the router is well suited for TV streaming.
The Deco X50-5G supports Wi-Fi 6, which enables high speeds of up to 2402 Mbps in the 5 GHz band and 574 Mbps in the 2.4 GHz band. These speeds are ideal for streaming applications, including 4K and even 8K streaming, without any delays or interruptions.
In addition, mesh technology ensures that the signal remains strong and stable in every area of your home, which is important for an uninterrupted streaming experience.
Automatically generated from the .Galaxus
11 months ago
It is not directly possible to set the operating time of the Wi-Fi for the TP-Link Deco X50-5G via the web interface. However, you can use the Deco app to prioritise devices and time their connections, which offers a similar function. For specific schedules, you may need to use other functions such as automation to achieve similar results.
Automatically generated from the .30 of 64 questions