CHF299.– CHF74.75/1TB
Samsung 990 Pro with Heatsink
4000Â GB, M.2 2280
Questions about Samsung 990 Pro with Heatsink
What would you like to know?
0 questions and answers
Unfortunately, we cannot offer the full manufacturer's warranty. After the 36-month warranty, you would unfortunately have to return the item via the manufacturer in the event of a service case.
The delivery date has been corrected.
Helpful answer
Hello timfranklin1,
here at Galaxus you can also find the right screws.
see at:
Delock mounting set 31-piece for M.2 SSD / module
Item number: 10324186
Good luck.
PS: SAMSUNG 990 Pro = super fast.
That's quite strange, perhaps the item is currently reserved for someone else in Basel. You are welcome to contact us via our Digitec Assistant so that we can check this in more detail and help you accordingly.
https://www.digitec.ch/help
The Samsung 990 Pro is not officially certified for use as a storage pool on the Synology DS923+. Synology recommends using their own M.2 NVMe SSDs for storage pools, such as the SNV3410. However, the 990 Pro can be used for caching as it is compatible with the M.2 NVMe slot. Workarounds such as special scripts may be required for use as a storage pool, but these are not officially supported.
Galaxus
2Â months ago
Hello, yes, this SSD is compatible with the PS5. It's an M.2 PCIe 4.0 NVMe SSD, which meets the console's extended storage requirements. What's more, the presence of an integrated heatsink is an advantage for heat management in the PS5.
Automatically generated from the .
Galaxus
2Â months ago
Helpful answer
The SSD is compatible with a Dell Optiplex 7060 PC because it uses the M.2 2280 format and a PCIe NVMe interface, so even if the PC supports PCIe 3.0 and the SSD is PCIe 4.0, backward compatibility is assured. The maximum capacity of 2 TB is also respected.
As for the CoreParts MS Cloner NVMe, it is compatible with external cloning of the SSD, enabling copies to be made outside the PC via this enclosure, which is adapted to NVMe M.2 2280 drives.
Automatically generated from the .Galaxus
3Â months ago
Helpful answer
Yes, this SSD is compatible with the PS5. It's an M.2 PCIe 4.0 NVMe SSD with very high read and write speeds, exceeding the minimum requirements of the PS5. What's more, it's recommended to use an SSD with a heatsink, and this model includes one, making it easy to install and ensuring good heat management in the console.
Automatically generated from the .
Galaxus
3Â months ago
Helpful answer
The Samsung 990 Pro with 4 TB is equipped with memory on one side. Both the controller and all flash memory modules are located on the front of the M.2 PCB, which makes it particularly space-saving and ideal for laptops that only support single-sided SSDs.
Automatically generated from the . Helpful answer
Your motherboard is designed for AMD, not Intel! Go for the ASUS ROG Strix Z790-E Gaming Wifi. Otherwise the rest is OK, even if I find it a bit 'overkill' for most uses compared to the graphics card you've chosen.
It should work with any board that has an M2 slot
I don't know where else you found the offer. But the SSD is already sold. It's also already in my profile under Sold.
Sorry.
The best thing to do is to check with the manufacturer, but given that one stores 2 bits per cell and the other 3, it makes sense that the 4Tb model uses MLC.
Galaxus
7Â months ago
The ASUS ROG B550-E GAMING motherboard is compatible with the Samsung 990 Pro M.2 NVMe SSD. This drive uses the PCIe 4.0 interface, which the motherboard supports via its M.2 slots. Make sure you configure the settings correctly in the BIOS to optimise performance.
Automatically generated from the .Galaxus
7Â months ago
Helpful answer
Yes, this SSD is PS5 compatible. The Samsung 990 Pro with heatsink is designed to meet the PCI-SIG D8 standard, which is supported by PS5, and includes a heatsink to prevent overheating and maintain high performance.
Automatically generated from the .Galaxus
8Â months ago
Helpful answer
The Samsung 990 Pro is not officially certified for use as a storage pool on the Synology DS923+. Synology recommends using their own M.2 NVMe SSDs for storage pools, such as the SNV3410. However, the 990 Pro can be used for caching as it is compatible with the M.2 NVMe slot. Workarounds such as special scripts may be required for use as a storage pool, but these are not officially supported.
Automatically generated from the .
Helpful answer
Yes, works perfectly
Galaxus
9Â months ago
Helpful answer
The Samsung 990 Pro SSD (M.2 2280) is generally compatible in modern laptops with an M.2 2280 slot. To ensure that it fits in an ASUS Zenbook 14 OLED, you should check whether the device has a corresponding M.2 slot. Most modern laptops support M.2 SSDs, but it is always advisable to check the specifications of the device.
Automatically generated from the .
Helpful answer
yes, you can use the appropriate tool to create a mirror image of the system. i use Hard Disk Manager 17 Advanced from Paragon for this.
Galaxus
10Â months ago
Yes, if you remove the heatsink and void the warranty (I did this for a laptop). Otherwise it's better to buy the version without the heatsink!
Helpful answer
It works, but it's far too oversized for a Legion 7. You get the same result with a Lexar NM620, for example:
Lexar NM620 (2000 GB, M.2 2280)
30 of 66 questions
