That should probably have been 38 and was entered incorrectly.
Thank you for pointing this out. We will be happy to pass this on internally to the relevant department and hope that it will be corrected promptly.
The colour here should be highlighted as white.
Thank you very much for pointing this out. We will be happy to pass this on internally to the responsible department and hope that this will be adjusted promptly.
The Asus ROG Strix B650-A Gaming WiFi motherboard supports DDR5 RAM memory with frequencies up to 7600 MHz, but it is not specified if the G.Skill F5-6000J3636F16GX2-TZ5RS model is on the Asus supported components list (QVL). To confirm compatibility, please check the QVL list on the official Asus website.
I'm not exactly an expert, but if I'm not mistaken, a notebook always needs SO-DIMM. Something like this, for example: Corsair Vengeance (2 x 32GB, 4800 MHz, DDR5-RAM, SO-DIMM)
Got the same RAM with a 12900k unfortunately only with 6000 MHz to run under XMP 2. now with a 13900k no problems. I would recommend using the latest BIOS.
I am sorry if we have had the wrong stock here and the delivery date has been delayed as a result. Please contact our customer service, we will be happy to help you find an alternative:
https://helpcenter.digitec.ch/hc/de/requests/new
You should also pay attention to the following. The ram sticks run at 4800 MHz in the bios by default. If you want to use the full speed of 7600 MHz, you can only insert 2 sticks into the board (not 4). So if you want 64gb Ram you should better buy 2x32gb and not 4x16gb.
i had made the same error buying this kit for AM5. keep the profile DOCP 2 just lower the frequency to 5200 and it will run stable and boot quick. There is absolutely no change in performance.
Hi Damian, simply explained, the smaller the latency the faster the memory.
Described in more detail:
Column Address Strobe Latency (CL or CAS Latency for short), also called memory latency, is the time required to address a column in the main memory of a computer. The measure of this is the required number of clock cycles, whereby a lower number is better.
LG
Yes, the RAM is about 1 cm too high for me; however, I have a 7800X3D. The bracket for Intel should be about the same height.
There should be enough space in the case to raise the fan, but I would only test it with the middle fan for now.
For me, the cooling capacity is easily sufficient under full load.
Alternatively, the asymmetrical fans like the NH-U12A could be interesting for me.
I also have an ASUS Z690 motherboard for DDR5 Ram, I have 4x32gb in DDR5 so a total of 128gb, Intel 13900K, and 4080 TI 64gb graphics card.
All running beautifully.
Have a look at the mainboard page. It looks like every G.Skill module is compatible at the moment.
https://www.gigabyte.com/Motherboard/Z790-AORUS-MASTER-rev-10/support#support-dl
According to the ASUS website, a maximum of 196 GB is possible.
4 x DIMM, max. 192GB, DDR5 7800+(OC)/7600(OC)/7400(OC)/7200(OC)/7000(OC)/6800(OC)/6600(OC)/6400(OC)/ 6200(OC)/ 6000(OC)/ 5800(OC)/ 5600/ 5400/ 5200/ 5000/ 4800 Non-ECC, Un-buffered Memory*
If you have tightened the timings, you just have to check whether 4 modules can still cope with this. It is often possible to tune everything a little with 2 bars, but with 4 it is no longer possible. If this is the case, the bars give as much voltage as they can handle (I think max. 1.4V), then the chance of tuning is greater.
Hello together. I bought this RAM for the mainboard (ASUS ROG Strix X670E-I Gaming Wifi). When I now look at the compatibility list of the mainboard, these RAM are not on it (others from G.Skill with 6000 Mhz are on it). If I set them to Auto in the Bios, they are recognised as 4800 Mhz and booting is quite fast. If I set them manually or go to D.O.C.P I in AI Tweaker, they are correctly detected as 6200 Mhz, but booting is very slow (almost a minute versus about 20 seconds). Should I use other rams that are on the list? Unfortunately, I don't know the details.