Name: PLA filament
Brand: Purefil
SKU: 21373512
Price: 136 CHF
Availability: InStock
Rating: 4.3 (1261 reviews)

productDetailPageQuery

Purefil

The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, leading to convincing printing results with all FDM 3D printers. Each coil is sealed in a high-quality bag. 

- Made in Switzerland 
- Small diameter and roundness tolerances 
- Easy to print 

Polyactide is a polymer that consists of lactic acid molecules, among other components. We currently have PLA filament in 1.75 mm and 2.85 mm in our range. A heated bed is advantageous for PLA filament, but not essential. We recommend using an air cooler when processing PLA filament. Furthermore, PLA is characterized by a more pleasant odor during processing compared to other plastics. However, the temperature below which PLA starts to soften is relatively low. Even at high temperatures in summer, PLA parts can deform. As a starting material, PLA is basically biodegradable under special conditions. However, the final product contains pigments and additives, so PLA parts must still be disposed of in the garbage and not in the garden. 

This filament meets the compositional requirements of European Regulation No. 10/2011 on plastic materials intended for food contact. 

Characteristics: 
- Minimal shrinkage 
- Little delay 
- Low water absorption 
- Soluble in many organic solvents 
- High UV resistance 
- Low flammability 
- Heat resistance up to approximately 60°C 

PLA filament or polylactide is biodegradable, but certain environmental conditions are necessary, which can usually only be found in industrial composting plants. PLA does not normally decompose in nature, so we do not recommend composting PLA filament or printed parts made of PLA.

Actual product image Purefil PLA filament (PLA, 10000 g, 1.75 mm)

Key specifications

Print material

3D printing filament is the thermoplastic feedstock for fused deposition modeling 3D printers. There are many types of filament available with different properties, requiring different temperatures to print.

Filament diameter

Maximum print speed

Nozzle temperature

Print bed temperature

Tensile strength

Indicates the tensile strength that a printed component can withstand before it breaks, measured in megapascals (MPa) in the print plane (X-Y). Higher values indicate more robust, tear-resistant prints.

Certifications

PLA filament

3D printer filament

30-day right of return – unopened

General information

Colour

Material

3D printer properties

Origin

Voluntary climate contribution

Product dimensions

The 1.75 mm PLA filament requires a nozzle temperature of 190-230 °C for the printing process.

Processing PLA

The material features a tensile strength of 60, allowing for average stability of printed components during use.

Mechanical strength

Tight tolerances in the manufacturing process support consistent printing results when used on all FDM printers.

Search

Settings

Customer account

Comparison lists

Watch lists

Cart

Purefil PLA filament

Colour10

At a Glance

Processing PLA

Mechanical strength

Low manufacturing tolerances

In Detail

Compare products

Goes with

Purefil PLA filament

Colour10Show all

At a Glance

Processing PLA

Mechanical strength

Low manufacturing tolerances

In Detail

Description

Specifications

Price trend

Warranty & return rates

Questions about this product21

Product ratings1261

Compare products

Similar products

Sales rank in 3D printer filament

Goes with

Often bought together

Colour10