Purecrea ESP8266 WiFi Module - ESP-01

This small microcontroller is very powerful and also has a WLAN radio module. The module is compatible with the Arduino IDE and can be programmed with Arduino. With the ESP8266 you can easily connect your projects to the internet. To program the module you need a programming adapter "ESP-01 CH340G Programmer", which you can also find in our shop. Attention: The ESP8266 has a 3.3V logic level! Connecting it to the 5V level will destroy the module! Therefore, always use a logic level converter if you want to operate the ESP8266 at 5V.

Technical details:
Type: ESP-01 ESP8266 espressif
Number of GPIO: 2
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated 32-bit RISC processor
+19.5dBm output power in 802.11b mode
Power dissipation <10uA
1MB flash memory
Control via UART interface with 115200 baud via simple AT commands possible
WakeUp time: <2ms
Standby power consumption: <1.0mA
Integrated antenna
Size: 14.5 x 24.8mm
Weight: 2g

Scope of delivery:
1x ESP8266 WiFi Module - ESP-01.