Hailea Ultra Titan 300 HC250

This continuous cooler essentially replaces the radiator, as the water is regulated down to a temperature set by you. Temperatures of up to 4°C are possible, but please note that condensation can form due to the temperature difference. The temperature can be set in single steps up to 28°C via the display. Appropriate insulation accessories for the hose and CPU are also available. Alternatively, the chiller can be set to a value just below room temperature to avoid the problem of condensation.

Due to the low water temperatures, there are numerous possibilities for overclocking. The service life of your components increases significantly. Furthermore, this system is also interesting for noise applications, as the chiller can be placed in a different room. We recommend integrating the chiller as an additional cold source in a system alongside an existing radiator. This way, you can switch off the normal radiator as needed (for overclocking, benchmarking, or during midsummer) and the chiller will take over the cooling.

Which aquarium size cools my continuous cooler? The manufacturer's specifications are as follows:
Model / Litre:
HC-130 / 50-100L
HC-150 / 50-200L
HC-250 / 100-300L
HC-300 / 100-400L
HC-500 / 200-800L
HC-1000 / 300-1000L
HC-2000 / 400-1500L

Please note that the manufacturer's specifications were created under optimal conditions. For example, the temperature behavior can vary greatly due to the insulation of the pool, the radiation of the lamps, or the exposure to sunlight. We therefore recommend choosing a larger model when reaching the upper limit of the litre values.

Compatibility note: The chiller is delivered with connections for 1 inch hose (inner diameter approximately 19 to 20mm). Included in the delivery are one pair of straight and one pair of 90° angled connections. To use the chiller with standard connections, we recommend art. 37018 (for G1/4) and 37019 (for G3/8).