Extrudr Filament Green-TEC Black 1.75mm 1.1Kg

Green-TEC Filament

Biocompounds (BDP) is produced almost 100% from renewable and natural raw materials. The raw materials are CO2-neutral and ecologically harmless. The new biomaterials are a non-toxic alternative to conventional ABS, PETG, or PLA filaments and are even superior to them in terms of temperature resistance, hardness, and elongation. The material properties also surpass established 3D printing materials in terms of shrinking and warping, making it suitable for complicated and especially large print objects. The printer does not require a heating bed.

Application: High-performance application in the technical field as well as a biological alternative to ABS and PETG. Very high temperature resistance. Regulation: The biopolymer complies with all regulations of the European Food Contact Regulation.

Properties:

• Temperature resistant up to 110-120 degrees
• Very low warping (<0.5%)
• High mechanical resistance resulting in lighter components
• Food safe
• Odourless
• High layer adhesion and good optical properties
• Biodegradable

3D printing settings:

• Max pressure in mm/s: 120
• Minimum hotend temperature: 200 degrees
• Maximum hotend temperature: 230 degrees
• Recommended hotend temperature: 215 degrees
• Nozzle material: All
• Nozzle diameter: 0.25-1.2mm

First recommendation:

• Heating bed: 35-50 degrees
• Adhesion with adhesive spray

Second recommendation:

• Without heating bed
• Adhesion with Blue Tape

Technical data:

• Heat resistance: 110 degrees

Diameter: Our filament is high quality and has very low tolerances.

Typical guide values:

• Diameter: 1.75mm
• Tolerance: +/- 0.05mm

Coil size:

• Diameter outside: 20cm
• Width: 6.2cm
• Diameter inside (hole): 5.2cm.