Digitus Network Rack Dynamic Basic Series - 600x800 mm (WxD)

The cabinets of the Dynamic Basic series have been designed for the user-friendly installation of active and passive network components, as well as for clean cabling. Each cabinet is made from up to 1.5 mm thick steel sheet, ensuring excellent stability through a special sheet metal bending technique that creates a robust steel construction. The color finish is achieved through powder coating in Gray (RAL 7035) and Black (RAL 9005). In special cases, disassembly of the cabinets can be performed to reach hard-to-access installation locations. The doors can be easily removed, and a door hinge change can be made. Additionally, the roof is prepared for the installation of a fan module for active ventilation. The cabinets include two pairs (four pieces) of mounted 483 mm (19") profile rails inside. These are galvanized and marked with height units (countable in both directions). They can be adjusted in depth and are also connected with depth braces inside the cabinet to enable intensive installation with 483 mm (19") components. An important aspect of the installation is cable management. Each cabinet is equipped with a punched cable entry with a cover plate at the bottom. The bottom of cabinets wider than 800 mm is additionally expanded with punched cable entries with plastic covers on the left and right. In the roof, there is one entry for cabinets with a width of 600 mm and three entries for cabinets starting from 800 mm wide. A comprehensive range of accessories for cable routing, shelves, etc., is available to meet many everyday practical requirements.