DFRobot 9g 180° servo with slipping clutch

With servos, it can happen that if the mechanical load exceeds the specifications, it may lead to damage to the gearbox or overheating. These special clutch servos with a clutch function and electronic protection prevent overload or damage. If the angle of a servo is altered by external forces during normal operation, the servo can automatically reset and continue to operate through the clutch function, preventing damage. The additional electronic protection shuts down the blocked servo after 5 seconds to avoid overheating. This servo features high torque, stable performance, precise running angle, and is easy to install. When operated at 6V, it achieves a stall torque of 1.2 kg/cm. There is no limited stop inside the servo, allowing it to rotate smoothly in 360 degrees (only manually). The servo can be controlled using the servo libraries from your Arduino IDE and can be actuated with a maximum rotation angle of 180 degrees within a pulse range of 500-2500 μsec.

Technical details:
Operating voltage: 4.8 to 6V DC
Type: DS-S006L
Communication: PWM
Operating angle: 180°±10°
Pulse width range: 500 to 2500 μs
Static current: ≤8 mA at 6.0V
Idle current: ≤50 mA at 4.8V ≤60 mA at 6.0V
Stall current: ≤550 mA at 4.8V ≤650 mA at 6.0V
Rated torque: ≥0.32 kg/cm at 4.8V ≥0.4 kg/cm at 6.0V
Stall torque: ≥1 kg/cm at 4.8V ≥1.2 kg/cm at 6.0V
Dimensions: 32.5 x 12 x 27.3 mm
Weight: 15 g

Package includes:
1x 9g 180° servo with slip clutch
1x Servo arm set.