Delock USB Type-C converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD

This Delock converter allows for the simultaneous operation of an M.2 NVMe SSD in 2280, 2260, and 2242 formats, as well as a 2.5" or 3.5" SATA HDD or SSD via the USB-C interface.

Clone function without PC
The integrated clone function enables cloning of storage without the use of a PC. It is possible to clone from NVMe to SATA and from SATA to NVMe.

Extensive connection options
Thanks to the specially designed adapter, the Delock converter can be quickly and easily connected to a USB Type-A port. This allows it to be seamlessly connected to new devices with a USB Type-C port as well as older devices that only have a USB Type-A connection. The adapter is located directly on the cable, so it cannot be lost.

Tool-free SSD installation
No tools are required for the installation of the M.2 SSD. The cover can be pushed back with a little pressure, the SSD is secured to the board with a rubber nub, and then the cover is snapped back on until it clicks into place.

Connections: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C port, 1 x 67 Pin M.2 Key M slot, 1 x SATA 6 Gb/s 22 Pin socket, 1 x DC power socket
Chipset: JMicron JMS581D
Supports M.2 modules in 2280, 2260, and 2242 formats with Key M or Key B+M based on PCIe (NVMe)
Maximum height of components on the module: 1.5 mm, use of double-sided modules is possible
For 2.5" and 3.5" SATA HDDs/SSDs
Supports NVM Express (NVMe)
Supports S.M.A.R.T.
Supports TRIM
Supports Native Command Queuing (NCQ)
Data transfer rate of up to 10 Gbps
Supports UASP
7 x LED indicators for power, access, and copy status
Bootable
Function buttons: 1 x clone button, 1 x power switch, 1 x switch for clone mode
Dimensions (LxWxH): approx. 102 x 67 x 14 mm
Hot Plug, Plug and Play.