Brodit Active holder 12V cig. - Motorola Nexus 6

Active holder with cig-plug

With USB cable and cig-plug adapter. Features a tilt swivel.

The active holder charges your smartphone while it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket or remove the cig-plug adapter and connect the USB cable to the car's or stereo's USB connector.

The holder is attached to a tilt swivel and can be adjusted to avoid light reflection. 12 Volt. Attach the holder to a ProClip Mounting Platform in your car.

Important note!

To transmit audio files from your device through the USB cable, this feature must be supported by the stereo in your car. You can easily test this by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

Installation instructions:

Please read all instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder to remove the tilt swivel attaching plate on the back.

2. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, while tightening the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place but still adjustable.

4. The holder is in place.