OmniVision Gel Visco-Vision

Visco-Vision Eye Gel 0.2% (10g)

The Visco Vision Eye Gel is a tear substitute containing the active ingredient Carbomer. It is a lubricating, highly viscous eye gel that provides soothing and long-lasting relief. The Visco Vision Eye Gel forms a lubricating and protective film on the eye, serving as a tear substitute.

Application

Instill one drop of the gel into the affected eye 3–4 times a day or as needed. The frequency of application depends on the symptoms and the relief achieved. Method of application: Wash hands thoroughly before use. Remove the safety ring before the first opening. Take off the cap from the tube. Tilt your head back and pull down the lower eyelid to create a small pocket. Hold the tube vertically with the opening facing down and gently squeeze the tube until a small drop forms at the tip. Instill this drop into the eye without touching the eye with the tip of the tube. Blink two or three times to distribute the gel evenly over the eye, and wipe away any excess gel around the eyelids if necessary. Close the tube carefully, ensuring that the tip does not touch anything (including fingers).

Precautions

• For external use only.
• Do not use if the tube or safety seal is damaged.
• Do not wear contact lenses while applying the gel.
• Wait at least 30 minutes after application before reinserting contact lenses.
• Avoid touching the eye or any other surface with the tip of the tube to prevent injury to the eye and/or bacterial contamination of the gel.
• If eye discomfort persists during the use of Visco-Vision Gel or recurs after discontinuation, consult a doctor.