Best selling RC motors
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Wilesco Fuel WiTabs
Dry fuel for steam engines.
2. Hobbywing Speed controller Quicrun 1060
Hobbywing QuicRun WP 1060 60A brush regulator
The regulator is specially designed for beginner and intermediate modelers. It is easy to use but at the same time very robust. It is equipped with automatic throttle calibration. The waterproof and dustproof housing will find use in all weather conditions. Drive in water, snow, dust, or mud without worry!
Reliable hardware combined with advanced software not only ensures high power output but also protects the system from overloads. The QuickRun WP 1060 regulator will find application in many RC vehicles with brush motors. It is dedicated for 1:10 scale models.
Manufacturer: Hobbywing
Model: HW30120201
Scale: 1:10
Continuous / instantaneous current: 60A / 360A
Power supply: 2-3S LiPo / 6-9 Cell NiMH
BEC output: Pulse: 6V / 3A
Input cables: Red - 16AWG - 100mm / Black - 16AWG - 100mm
Output cables: Blue - 16AWG - 100mm *1 / Yellow - 16AWG - 100mm
Input Connector: Large Tamiya connectors
Output connector: Connector 4.0 bullet
Set button on ESC: Inactive
Led Program Box: Inactive
LCD Program box: Inactive
Wifi module: Inactive
Programming port: Jumper Cap
Software update: Inactive
Size: 36.5 x 32 x 18mm
Weight: 39 grams
Dedicated: 1/10th Touring Cars / Buggies / Trucks / Rock Crawlers.
3. Wilesco Drive spirals 00800
Spirals can be cut to size as needed. Cut the spiral at the non-conical side, then interlock and twist them together.
4. Hobbywing Programming box
This LED programming box is suitable for programming HobbyWing brushless controllers. Programming the controllers is simple and quick with this LED programming box. It is small enough to always have it ready for use.
Compatible with the following HobbyWing products:
- Platinum V1/V2 series and FlyFun V5 series of brushless flight controllers
- XeRun series (most), EzRun, and QuicRun series of brushless car controllers
- SeaKing series of brushless boat controllers
Technical specifications:
Note: If the controller does not have a BEC, an external BEC or battery is required for operation.
Dimensions: 88 x 58 x 14 mm
Weight: 40 g
Input voltage: 4.8 V - 8.4 V.
5. Tamiya RS-540 Sport
Thus, it is equally suitable for use in both on-road and off-road environments. It is designed for high RPMs while maintaining low power consumption.
6. Amewi Impeller 11-blade 55 mm with 4900 KV brushless motor
Replacement EDF with Brushless Motor for Tiger S Jet
- Weight: 77 g
- Outer diameter: 55 mm
- Max. current draw: 35 A
- Equipped with 2627 4900 KV Brushless Motor
- Suitable for operation with 3S LiPo batteries
- 3.5 mm gold connectors on the motor.
7. Tamiya ESC TBLE 04S
The Tamiya TBLE-04S electronic speed controller is a versatile option suitable for both sensored brushless motors and brushed motors. With a maximum continuous current of 75 A, it supports motors starting from 23T and is ideal for use in vehicles with limited space. The controller can be operated with 6-cell NiMH (7.2 V) or 2S LiFe (6.6 V) batteries, allowing for flexible adaptation to various application needs. Thanks to its compact dimensions of 41.5 mm x 33.4 mm x 18 mm, it is particularly space-saving and can be easily integrated into different vehicle models. The TBLE-04S also features built-in overload and overheating protection to ensure the safety and longevity of the motor. With an integrated BEC that provides a voltage of 6 V and a maximum current of 1.5 A, this controller is a reliable choice for RC enthusiasts.
- Suitable for brushed and sensored brushless motors
- Maximum continuous current of 75 A, supports motors starting from 23T
- Operable with 6-cell NiMH or 2S LiFe batteries
- Built-in overload and overheating protection
- Compact dimensions for easy integration into vehicles.
8. Wiltec Single-Phase Electric Motor Double-Pole 230V 2.2kW with Starting Capacitor and Aluminium Wire Coil
This single-phase electric motor (asynchronous motor) is designed for driving compressors with an intake capacity of up to approximately 350 l/min. With a power output of 2.2 kW, the electric motor reaches speeds of 2850 revolutions per minute. The robust housing is made of aluminum.
The operating capacitor starts the motor with an electrical capacity of 35 µF. The function of the operating capacitor is not only to start the motor but also to ensure smooth power delivery and rotation in the correct direction. If higher power is required, a starting capacitor of up to 200 µF can be connected in parallel during the startup phase. Such an increase in total capacity is necessary, for example, for compressors or floor sanding machines. Once the motor is running, the starting capacitor is switched off. Additionally, the motor features integrated overload protection.
The electric motor with an IP55 protection rating is suitable for both clockwise and counterclockwise rotation. Changing direction is possible by re-wiring with a separate connection. The shaft has a diameter of 24 mm.
Additional information:
Key: 43 x 8 x 4 mm
Spring: 29 x 7 x 6 mm
Shaft length: 50 mm
Shaft diameter: 24 mm
Hole spacing: 140 x 125 mm
Motor size: 360 x 250 x 175 mm
Cable entry: ø 16.5 mm
Cable lugs: ø 4 mm.
RC motors
CHF127.99
Wiltec Single-Phase Electric Motor Double-Pole 230V 2.2kW with Starting Capacitor and Aluminium Wire Coil
9. O.S. Engines Candle Os 8 Standard Rc
Which glow plugs for which engines and applications?
A cold plug should be installed in engines with high displacement, during full throttle operation, when using fuels with a high nitromethane content, in high ambient temperatures, or when cooling is poor.
Medium "standard" plugs are recommended for low fuel nitration, in engines with low compression and power, etc. The medium glow plug type is usually the most affordable all-round plug and should be the first choice when tuning for a specific engine type.
Hot glow plugs are advisable when the engine has poor idle characteristics, when little nitromethane is used, in engines with low displacement, in very low ambient temperatures, or when the engine is predominantly operated in the partial load range.
10. Team Orion Vortex R10 One Sensorless BL ESC 35A (Tamiya Plug)
Matching batteries, revolutionizing electric motor design with V2 technology, providing LiPo batteries compatible with market demands, and bringing CRF technology to nitro engines; Team Orion's goal is to develop products that are more attractive, have better performance, and contain costs. Worldwide success proves we are on the right track.
RC motors
−10%
only 1 piece on sale
CHF39.40 was CHF43.80
Team Orion Vortex R10 One Sensorless BL ESC 35A (Tamiya Plug)
Product order
See all products