Top rated Model railway electronics

Here’s a ranking of the top rated Model railway electronics. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.

1. ESU LokPilot 5 Basic, 8-pin NEM652, gauge H0, 0

2. ESU LokPilot 5 DCC/MM/SX/M4,21MTC MKL,,H0,0 gauge

The LokPilot 5 DCC/MM/SX/M4 Decoder from ESU is a highly advanced electronic solution for model railroads in scales H0 and 0. This decoder is a versatile device suitable for a wide range of locomotives and is distinguished by its multi-protocol capabilities. It supports the common data formats DCC, Motorola, Selectrix, and M4, making it a flexible choice for model railroaders. With the ability to control 14 to 128 speed steps and up to 32 functions, the LokPilot 5 offers precise and customizable control. The automatic registration to digital control centers via RailComPlus significantly simplifies the commissioning and programming process. Additionally, the decoder allows the use of special braking modules and is compatible with various control systems, making it an ideal choice for demanding model railroaders.

- Multi-protocol support for DCC, Motorola, Selectrix, and M4
- Automatic registration to digital control centers thanks to RailComPlus
- Control of up to 32 functions and 128 speed steps
- Compatible with Märklin braking modules and ZIMO HLU / ZACK commands
- Built-in programming mode for easy adjustments with older control devices. 

3. ESU LokPilot 5 Fx DCC/MM/SX, 21MTC NEM660, H0, 0

4. ESU LokPilot 5 DCC/MM/SX/M4, PLUX22 NEM658

The LokPilot 5 DCC/MM/SX/M4 Decoder from ESU is a versatile and powerful solution for H0 scale (1:87) model railways. This decoder is specifically designed for use in locomotives and offers a wide range of features that make it an essential component of any model railway setup. With its ability to support various protocols such as DCC, Motorola, Selectrix, and M4, the LokPilot 5 can seamlessly integrate into existing systems. The automatic registration with compatible command stations and support for a variety of speed steps and functions make it a flexible choice for model builders.

- Multi-protocol support: DCC, Motorola, Selectrix, and M4
- Automatic registration with digital command stations thanks to RailComPlus
- Support for up to 32 functions and 128 speed steps in DCC mode
- Allows reading of CV values on the main track
- Compatible with Märklin brake modules and ZIMO HLU / ZACK commands. 

5. ESU LokPilot 5 DCC, 8-pin NEM652, H0 gauge, 0

The LokPilot 5 DCC is a highly advanced DCC decoder specifically designed for H0 scale (1:87) model railways. It offers a variety of features that facilitate the operation and control of locomotives. The decoder is exclusively compatible with DCC systems and provides precise control with 14 to 128 speed steps, as well as the ability to activate up to 32 functions. Thanks to RailComPlus® technology, the decoder automatically registers with compatible DCC systems, simplifying setup and use. The LokPilot 5 DCC is also capable of recognizing various braking and control systems, making it a flexible solution for discerning model railroaders. With its compact design and versatile applications, this decoder is a valuable addition to any model railway layout.

- Compatible with DCC systems, not suitable for analog AC systems
- Automatic registration with DCC systems thanks to RailComPlus®
- Supports up to 32 functions and 14 to 128 speed steps
- Recognizes various braking and control systems such as Märklin® and ZIMO®
- Easy programming and adjustment of CV values on the main track. 

6. ESU LokPilot 5 DCC/MM/SX/M4, 6-pin NEM651

7. ESU LokPilot 5 DCC, 6-pin NEM651, gauge H0,0

8. ESU LokPilot 5 DCC, 21MTC NEM660,,gauge H0,0

The LokPilot 5 DCC is a highly advanced DCC decoder specifically designed for H0 scale (1:87) model railways. It offers a variety of features that facilitate the operation and control of trains on digital tracks. The decoder is designed as a pure DCC decoder, providing a cost-effective solution for model railroaders who wish to forgo analog systems. With the ability to control 14 to 128 speed steps and up to 32 functions, the LokPilot 5 DCC allows for precise and flexible control. Automatic registration with DCC systems is supported by RailComPlus technology, making usage even simpler. Additionally, the decoder recognizes various braking sections and can be used with different DCC braking systems, making it a versatile choice for model railroaders.

- Supports 14 to 128 speed steps and 2- and 4-digit addresses
- Automatic registration with DCC systems via RailComPlus
- Recognizes Märklin braking sections as well as ZIMO HLU / ZACKCommands
- Can be operated with DCC brake units and DC voltage
- Automatically switches between operating modes without manual intervention. 

9. ESU LokPilot 5 DCC/MM/SX/M4, 21MTC NEM660

The LokPilot 5 DCC/MM/SX/M4 Decoder from ESU is a highly advanced electronic solution for model railways in the H0 scale (1:87). This decoder is a versatile device suitable for a wide range of locomotives and is distinguished by its multi-protocol capabilities. It supports the common data formats DCC, Motorola®, Selectrix®, and M4, making it an ideal choice for model railroaders seeking flexibility and compatibility. The LokPilot 5 allows for precise control of locomotives with up to 128 speed steps and up to 32 functions, enabling detailed and realistic driving control. Additionally, it offers automatic registration with digital control centers and supports various programming modes to facilitate customization and maintenance. With its compact design, the decoder is easy to integrate into most models and provides reliable performance.

- Multi-protocol support for DCC, Motorola®, Selectrix®, and M4
- Automatic registration with digital control centers thanks to RailComPlus®
- Supports up to 128 speed steps and 32 functions
- Compatible with Märklin® brake modules and ZIMO® HLU / ZACK commands
- Easy programming through various modes, including DCC and Motorola®. 

10. ESU LokPilot 5 DCC,PLUX22 NEM658, gauge H0,0

The LokPilot 5 DCC from ESU is a highly advanced DCC decoder specifically designed for model trains in the H0 scale (1:87). This decoder offers a wide range of features and is ideal for use in digital control systems. The LokPilot 5 DCC is a pure DCC decoder, not suitable for analog AC systems, making it a cost-effective option for DCC users. With the ability to control 14 to 128 speed steps and up to 32 functions, this decoder allows for precise and flexible control of model trains. Automatic registration with DCC systems via RailComPlus® and support for Märklin® braking sections as well as other systems make it a versatile choice for model railroaders.

- Supports 14 to 128 speed steps and 2- and 4-digit addresses
- Automatic registration with DCC systems thanks to RailComPlus®
- Recognizes Märklin® braking sections and supports ZIMO® HLU / ZACKCommands
- Can be used on analog DC trains, with a separate maximum speed setting
- Automatically switches between operating modes "on-the-fly". 

Product order
See all products