Best selling RC aircrafts from Amewi
On this page you'll find a ranking of the best Amewi products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Amewi Skylark
Suitable for beginners and advanced pilots. Switchable 6-axis gyro. Ready to use right out of the box. You receive a complete package with a pre-assembled model and a compatible transmitter – just unpack and get started. Due to its easy handling, this type is ideal for entering the world of model sports.
2. Amewi Air Trainer V2
It is characterized by very gentle flying characteristics and a robust, proven material technology. The modern 2.4 GHz remote control is included, as well as a 500mAh LiPo battery with the appropriate charger. Enjoy flying straight out of the box. The fuselage and wings are made from the very popular and impact-resistant EPO material in the model building scene. And in case of emergencies, a spare propeller is even included. The powerful 3-coreless motor, given its size, allows for great flight maneuvers like loops or turns. The Air Trainer is delivered RTF (ready to fly), and within just a few moments, you can conquer the skies.
3. Amewi Runner V3 Gyro
The Skyrunner has been further improved in its V3 version. Thanks to a 3-axis stabilization system, the model can be safely controlled even by beginners. Impressive maneuvers and even aerobatic figures can be learned in no time. Starting with this model is easy, and the gyroscopic system keeps the plane on course at all times. Just throttle up and initiate a gentle climb, and the gyro will immediately provide support, allowing the fun of flying to begin.
The system features a beginner and an advanced mode. In beginner mode, stalling the model is not possible (no loops, etc.). When switched to advanced mode, loops and stalling become easily achievable. The flight behavior of the Skyrunner V3 is very forgiving, allowing newcomers to immerse themselves in the world of model flying.
A long flight time combined with good gliding characteristics ensures uninterrupted flying fun, and the durable EPP material guarantees the model's longevity. Should the landing be a bit rough, that's not a problem either. The material can withstand a lot, the electronics are positioned far back in the fuselage, and the motor is mounted at the rear. The material can easily be reassembled with, for example, Styrofoam glue.
4. Amewi AMXflight P40 Fighter
The Amewi Edition of the Curtiss P-40 Warhawk is a scale replica in true-to-the-original paint scheme that combines perfect flight characteristics (6G for beginners, 3D for advanced pilots) with state-of-the-art technology. The model is controlled by all axes (aileron, elevator, sideways, motor) and is self-stabilizing (gyro) in 6G mode. This stabilization prevents the aircraft from stalling and allows only a limited angle, so loops, rolls or inverted flight are not possible in this setting. However, if switched to 3D mode by means of the high-quality 2.4 GHz transmitter, it is also suitable for dynamic aerobatics. All described standard maneuvers are then possible without any problems. If something does go wrong in the air, the P-40 can be switched back to 6G mode at the touch of a button and immediately resumes a stable flight attitude (rescue function). In addition to these features, the model is equipped with a receiver board that allows operation with e.g. Futaba or other 5 V S-Bus receivers as well as DSM receivers with a 3 V output. Thus, the model is not dependent on the supplied remote control, but can alternatively be used with an existing transmitter.
5. Amewi 3D Climber
Fully stabilized glider model with 5 controllable channels (elevator, rudder, ailerons, motor, gyro). Thanks to the support of the gyro, the model flies almost on its own and immediately compensates for all external influences, such as wind. This results in flight behavior similar to that of a significantly larger model, making the entire flight very smooth and easy. Even beginners can almost perfectly enter the world of model flying with this fantastic model. The gyro can be switched off, allowing for light aerobatics during flight. If something goes wrong, simply switch back to gyro mode, and the model will immediately realign itself. It maintains both altitude and lateral axis stability. Thermal flights are also possible with this model, and the overall flight time is very high with a single battery charge. Depending on weather conditions and motor usage, flights of up to 25 minutes are possible.
6. Amewi F-22 Raptor
The F-22 Raptor is a fifth-generation air superiority fighter exclusively used by the US Air Force as the successor to the F-15A-D Eagle. Notable features include its stealth capabilities, modern avionics, and the ability to fly supersonically without afterburners. Its maximum speed is 2,414 km/h, and it has a range of approximately 3,000 km.
The AMX Flight F-22 is a scale replica in PNP (Plug and Play) version. The model is largely pre-assembled; assembly is limited to attaching the wings, linkages, and tail. All servos (2x 9g), the 50 mm 11-blade impeller including a 4900KV brushless motor, and the 30A Hobbywing ESC are already installed.
The jet is designed to accommodate 3S LiPos between 850 and 1000 mAh, allowing the F-22 to achieve impressive flight performance. The speed ranges from fast to slow, making it suitable for less experienced pilots as well. Maneuverability and roll rate are also impressive, offering a wide range from very agile to docile. The takeoff behavior is completely uncritical, allowing the model to be easily hand-launched. The jet shows no tendencies to the typical sinking of an impeller model. Due to its small size, the model is the perfect trunk flyer for quick outings and provides a lot of enjoyment even in a group with multiple models. A special feature of our F-22 is that the elevator and ailerons are connected via a servo to the control horns, significantly enhancing the model's agility.
7. Amewi AMXPlanes Swift 2100 Motorglider EPO PNP
AMXPlanes presents the Swift 2100, its first own glider. This model is characterized by easy assembly, hassle-free hand launching, and wonderful flight behavior. A CFD method was used in the design of the aircraft to achieve the optimal lift-to-drag ratio. Thanks to its aerodynamic properties, the Swift 2100 glides smoothly and efficiently through the air, allowing for precise control and maneuvering.
Made from robust EPO foam, this glider is resistant to minor collisions and impacts. Carbon fiber reinforcements provide additional structural strength, ensuring that the model remains stable and responsive even during dynamic flight maneuvers. The factory-installed drive system features an efficient 3136/1000KV brushless motor and a Hobbywing 40A brushless controller, paired with a 3S or 4S LiPo battery and a highly efficient 10x6 folding propeller, delivering ample thrust for quick climbs. Depending on throttle management and the capacity of the chosen battery, long flight times of up to 30 minutes are possible. All control surfaces are operated by 9g digital servos (6x), allowing for control of the following functions: motor/throttle, ailerons, flaps, elevator, and rudder. The wheel mounted in the front fuselage and the plastic parts on the wingtips and tail also allow for landings on harder surfaces.
With the Swift 2100, gliding enthusiasts experience an unparalleled flying experience. Whether for leisurely rounds in thermals or exciting aerobatic maneuvers, everyone will find their full enjoyment thanks to the combination of power and precision.
8. Amewi AM38
Description AM38 Aircraft
Beautiful replica of a four-engine wide-body aircraft with two full-length passenger decks. A modern 6-axis gyro stabilizes the flight attitude and assists in the control of the aircraft, powered by two strong thrust propellers. With the interference-free and easy-to-handle 3-channel remote control, impressive flight maneuvers can be performed with this king of the skies. The AM38 is also very well suited for beginners due to its simple handling. Even as a display model, this replica of the majestic low-wing aircraft would be an eye-catcher. Flight time: 7-8 minutes.
9. Amewi AMB74
Since the 1970s, this aircraft has been one of the most well-known and largest passenger planes in the world. In countless films, this airplane has been the secret star, and its spaciousness along with its excellent long-distance flying capabilities are legendary. Amewi now brings this giant of the skies to everyone. With the built-in gyro (flight stabilization) and the included 3-channel transmitter, flight training is part of the package, allowing even complete beginners to quickly achieve their first successes with a model airplane. All external influences such as wind and control errors are almost eliminated by the model's electronics. In gyro mode, stalling the model is also not possible, as the maximum climb and descent angle is limited to 15°. Thanks to the robust material (EPP) and lightweight design, the model is very durable and can withstand a hard landing or two. Even ground takeoffs and landings are easily possible with the included landing gear (requires a smooth surface).
Features:
- Scale model
- Great appearance
- Fully ready to fly (RTF)
- Built-in gyro
- Beginner-friendly
- 2.4 GHz
- Long flight time
- 3-channel control
- Battery included (1S LiPo 300mAh)
- Charger included
Technical Data:
- Wingspan: approx. 520 mm
- Length: 490 mm
- Height: 180 mm (including landing gear)
- Weight: approx. 85 g ready to fly
- Battery: 1S LiPo 300mAh
- Charger: USB
- Transmitter: 2.4 GHz
- Receiver: 2.4 GHz gyro receiver
Included in the package:
- AMB74 model
- 2.4 GHz transmitter
- 300 mAh 1S LiPo battery
- USB charger
- Manual
Required accessories:
- Batteries for transmitter: 4x 1.5 V AA Mignon.
10. Amewi MIG E17
Compact Mig-17 with 50 mm 11-blade EDF. Authentic paintwork and decoration. Highly efficient 50 mm 11-blade EDF drive with a 2627 4900KV brushless motor and 40 A Hobbywing controller. Gentle flight behavior thanks to the chosen airfoil. Removable cockpit canopy for easy battery replacement. Robust model made of EPO foam. Three micro servos with metal gears for ailerons and elevator. PNP - Plug and Play. These models are almost ready to fly. The motor, controller, and servos are already mounted and wired. Unlike RTF models, you will need additional accessories before the model is ready for use. Brushless motor. A brushless motor is an electric motor without brushes, which, compared to brushed motors, features higher efficiency, less wear, and lower weight. Skill level: Advanced. You have basic knowledge and possess the necessary experience and suitable tools to correctly wire your model if needed and operate it safely.
