Best selling Modelling clay from Cernit
On this page you'll find a ranking of the best Cernit products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Cernit Translucent
Cernit TRANSLUCENT 250 g TRANSLUCENT blanc TRANSLUCENT : Pâte à modeler à cuire (polymère). Complètement translucide après cuisson. Permet de reproduire des objets ou des alim ents plus vrais que nature. CUISSON : Faire cuire la pâte entre 110°C (230°F) et 130°C (266°F) dans un four traditionnel pendant 30 minutes maximum. Sans odeur à la cuisson. Ne se fissure pas. Ne pas utiliser de four micro-ondes. Après cuisson, la pâte est dure mais peut encore être travaillée (poncée, peinte, etc.). CARACTÉRISTIQUES : Ne sèche pas. Après cuisson, la pâte est complètement solide mais reste flexible. Sans odeur, la pâte est agréable à travailler et reste malléable à l'infini. Elle ne déteint pas ni sur les mains, ni sur les outils. Toutes les couleurs peuvent se mélangées afin d'obtenir la teinte souhaitée. Végan. UTILISATIONS : Idéales pour créer des bijoux, des reproductions, des miniatures, des personnages etc.. Toujours travailler la pâte avec les mains propres sur une surface préalablement nettoyée. Malaxer la pâte pour la rendre plus souple avant d'être travaillée. Elle peut être sculptée, moulée, imprimée ou utilisée avec d'autres matériaux comme des pierres, perles, plumes. Possibilité de rajouter des additifs comme des paillettes, de l'encre à alcool etc.. à l'intérieur de la pâte avant cuisson. POIDS : 250g. FABRICATION : Toutes les pâtes à modeler à cuire Cernit sont fabriquées en Belgique, près de Liège.
2. Cernit Metallkugel Werkzeug
Cernit modeling tool with metal ball heads 13 mm/8 mm.
Features: This economical and high-quality tool has a differently sized ball at each end.
Applications: With this ergonomically shaped modeling tool, precise shaping and modeling can be achieved, as well as the incorporation of fine details. It can be used to bend the paste or shape it into a specific form.
Material: Metal.
Modelling clay
Quantity discount
CHF12.10 per piece for 2 units CHF432.14/1kg
Cernit Metallkugel Werkzeug
3. Cernit Metallic
Cernit, Metallic 250g, Gold Pearl: Oven-hardening modeling clay (polymer). After curing, it reveals a high-quality metallic look. Contains a variety of very fine glitter particles (mica). Curing: Bake the paste in a conventional oven at 110°C to 130°C for a maximum of 30 minutes. It is odorless during baking and will not crack. Not for use in a microwave. After baking, the paste is hard but can still be worked on (sanded, painted, etc.). Features: Does not dry out. After curing in the oven, the paste is completely solid but remains flexible. Odorless, the paste is pleasant to work with and remains endlessly moldable. It does not stain, neither on hands nor on tools. All colors can be mixed to achieve the desired shade. Vegan. Application: Ideal for making jewelry, reproductions, miniatures, figures, etc. Always work the paste with clean hands on a previously cleaned surface. Knead the paste to make it pliable before working with it. It can be sculpted, shaped, printed, or used with other materials like stones, beads, feathers, etc. Before baking, additives like glitter, alcohol ink, etc. can be added to the inside of the paste. Weight: 250g. Production: The Cernit paste is manufactured in Belgium, near Liège.
4. Cernit Glue
Cernit, Glue 80ml, Adhesive Properties: This strong adhesive has been specifically developed for oven-hardening modeling clay (polymer). With its precision tip, even small details can be glued neatly. When applied, it is white and later becomes completely transparent. Application: Cernit Glue can be used for bonding both raw and hardened clay or a mixture of both. It can also be used to bond modeling clay (polymer) with other porous or non-porous materials. Hardening: Oven hardening is mandatory. The strong adhesive properties only develop at oven temperatures of up to 130 °C, as with Cernit clay. Content: 80 ml. Production: The Cernit glue is manufactured in Belgium near Liège.
5. Cernit Texture mat MOMENTS
Cernit, texture mat, Moments PROPERTIES: The texture mat from Cernit is very soft to make it easy to use. It can be cleaned and reused. APPLICATION: Like a stamp, the texture mat gives a beautiful surface texture to any paste. It can also be used with wax, on paper or fabric. MATERIAL: Natural rubber, derived from latex. FORMAT: 9x9cm. IMPORTANT: This tool is not suitable for people with a latex allergy.
6. Cernit Texture mat MANDALA
Cernit Texture Mat Mandala
Features: The Cernit texture mat is very soft to facilitate application. It can be cleaned and reused.
Application: Like a stamp, the texture mat gives any paste a beautiful surface texture. It can also be used with wax, on paper, or fabric.
Material: Natural rubber, derived from latex.
Size: 9x9 cm.
Important: This tool is not suitable for individuals with a latex allergy.
7. Cernit N°1
Cernit, Number One 56g, Bordeaux
Number One is an oven-hardening modeling clay (polymer). After curing, it is completely opaque and there is no change in color tone. The Number One range is suitable for all techniques. It allows for gradients or sharp distinctions between multiple color tones.
Curing: Bake the paste in a conventional oven at 110°C to 130°C for a maximum of 30 minutes. It is odorless during baking and will not crack. Do not use in the microwave. After baking, the paste is hard but can still be worked on (sanded, painted, etc.).
Properties: The paste does not dry out. After curing in the oven, it is completely solid but remains flexible. It is odorless, pleasant to work with, and remains infinitely moldable. It does not transfer color, neither on hands nor on tools. All colors can be mixed to achieve the desired shade. Vegan.
Application: Ideal for making jewelry, reproductions, miniatures, figures, etc. Always work the paste with clean hands on a previously cleaned surface. Knead the paste to make it pliable before working with it. It can be sculpted, shaped, printed, or used with other materials like stones, beads, feathers, etc. Additives like glitter, alcohol ink, etc. can be incorporated into the paste before baking.
Weight: 56g.
Manufacturing: The Cernit paste is produced in Belgium, near Liège.
8. Cernit Opaline
Cernit, Opaline 56g, lilac opaline: Oven-hardening modeling clay (polymer). Becomes semi-translucent after hardening. Adds relief and depth to all creations. Hardening: Bake the paste in a conventional oven at 110°C to 130°C for a maximum of 30 minutes. It is odorless during baking. Will not crack. Not suitable for microwave use. After baking, the paste is hard but can still be worked on (sanded, painted, etc.). Properties: Does not dry out. After oven hardening, the paste is completely solid but remains flexible. Odorless, the paste is pleasant to work with and remains infinitely moldable. It does not stain, neither on hands nor on tools. All colors can be mixed to achieve the desired shade. Vegan. Application: Ideal for making jewelry, reproductions, miniatures, figures, etc. Always handle the paste with clean hands on a previously cleaned surface. Knead the paste to make it pliable before working with it. It can be sculpted, shaped, printed, or used with other materials like stones, beads, feathers, etc. Before baking, additives such as glitter, alcohol ink, etc. can be incorporated into the paste. Weight: 56g. Production: The Cernit paste is manufactured in Belgium, near Liège.
9. Cernit Stainless steel scooter
Cernit rouleau inox 304 CARACTÉRISTIQUES : Economique et qualitatif, cet outil est un allier pour toutes les créations en pâte à modeler. Très facile à nettoyer. UTILISATIONS : Ce rouleau permet d'aplatir la pâte, d'incruster ou agrandir des motifs, de fusionner plusieurs couleurs entre elles etc.. MATIÈRE : Inox.
10. Cernit Soft Mix
Cernit, Soft mix 56g PROPERTIES: White oven-hardening modelling clay (polymer) that later takes on the colour of the paste it is mixed with. Does not change the colour of the paste. Easy to use. Suitable for children. APPLICATION: Soft Mix makes it quick and easy to soften modelling clay. Soft Mix can also be used to increase the amount of paste remaining. INSTRUCTIONS: Mix up to 2/3 of the Cernit paste with 1/3 of the Cernit Soft Mix. Fits in the conventional oven like other Cernit pastes. WEIGHT: 56g. MANUFACTURE: The Soft Mix paste is produced in Belgium, near Liège.
Product order
See all products