Target Corona LED Strips

Replacement LED light strip for the Target Corona Vision Lightning System

Installation instructions:

1. Remove the broken LED strip from the ring.
2. Remove the loose adhesive remaining in the ring. Leave the black tape on the inside of the ring that covers the connections in place. Align the cable of the new LED strip with the cutout in the plastic ring and secure it.
3. Pull back about 10 cm of protective film from the LED strip at the cable end to expose the adhesive foam.
4. Press the LED strip lightly into the plastic ring. Work your way around the ring while pulling off the protective film.
5. The free end of the LED strip should align almost completely with the cable end when fully inserted. Remove the cable from the cutout, lift the beginning of the LED strip, and place the free end of the strip into the ring. Then, place the cable end of the strip on the free end of the strip and reconnect the cable to the connector.