Lanitz 521-103-010 Bügelfolie Magic L x B 10 m 60 cm Cyan Violett

ORACOVER® MAGIC is the ultimate effect covering for remote-controlled airplanes. Shimmering colors that change their hue with the angle of view, in a vibrant brilliance. High-quality model building film based on polyester, produced using a globally patented process for unmatched quality. The film is characterized by unique processing properties: it can be ironed on and off, allowing for a second chance in case of processing errors, fuel resistance, temperature resistance up to 250°C, paintability, and particularly high adhesive strength. When applied according to the processing instructions, ORACOVER® does not bubble or wrinkle.

Our tip: ORACOVER® Hot Melt Adhesive. Unstable wood fibers can become unstable and tear under stress. Wrinkling and, in the worst case, complete detachment of the fabric are the consequences. For optimal pretreatment of your wooden substrate, we recommend applying the ORACOVER® Hot Melt Adhesive to the areas to be covered. The ORACOVER® Hot Melt Adhesive penetrates the wood and bonds the loose wood fibers in the core wood. This achieves excellent 3-D adhesion of the EASYCOAT® covering film to the substrate. With the ORACOVER® Hot Melt Adhesive, no further pretreatment of the wood is necessary.

Application of the ORACOVER® Hot Melt Adhesive:
1. Sand your wood thoroughly and remove the sanding dust.
2. Stir the contents of the can well.
3. Apply the ORACOVER® Hot Melt Adhesive 1-2 times thinly and evenly using a brush.
4. Allow the adhesive to dry overnight, but for at least 10 hours.
5. Cover your model as usual with the EASYCOAT® iron-on film.

Coverage: approximately 1 can / 1m². Not suitable for substrates that are not resistant to organic solvents.