Jeti Capteur courant/tension Hacker Duplex MU 200

The MUI sensors are designed to measure voltages, currents, and consumed battery capacity in models. The JETIBOX terminal is used to display the measured values, and the DUPLEX system operates at 2.4 GHz for wireless transmission of information. The DUPLEX system utilizes the 2.4 GHz band, which not only allows for the transmission of remote control data to the model but also for the transmission from the model back to the transmitter. The telemetry data collected during operation is transmitted in real-time, and the current status of the measured quantities can be displayed on the LCD screen of the JETIBOX. The MUI telemetry sensors enable the measurement of voltages and currents in your model and transmit this information using the DUPLEX system (receiver and transmitter module). Thanks to their high current measurement accuracy, these sensors allow tracking of the consumed capacity of the measured battery. The MUI unit records not only the duration of current flow but also the average and maximum current values. Additionally, it provides precise voltage values along with their minimum and maximum values. The JETIBOX terminal is used to set parameters and display the measured values. The MUI sensors allow for the setting of an acoustic signal when predefined parameters are exceeded. This alarm can be configured for maximum current, minimum voltage, and maximum allowable capacity consumption. The acoustic signal is generated by the transmitter module through a built-in sound generator. Individual alarm notifications are distinguished by assigning a letter from the Morse code alphabet. The acoustic signals for parameter exceedances are also generated even when no JETIBOX is connected. When a JETIBOX is connected, the LCD display indicates which parameter has been exceeded.