Product details
The EpoxyPlast 3D B50 DeepPour Resin is a high-quality epoxy resin specifically designed for applications in art and crafts. It is ideal for casting projects that require a deep and clear layer. Weighing 1.5 kilograms, this transparent resin offers excellent workability and allows for creative expression in various projects. The product is suitable for individuals aged 12 and older and should be handled with care, as it poses health and environmental hazards, as indicated by the relevant hazard warnings and pictograms. The use of protective equipment is recommended to avoid skin and eye irritation. The EpoxyPlast 3D B50 DeepPour Resin is a versatile material valued in the art scene and DIY community for creating a clear, durable, and resilient surface. It is particularly suitable for crafting artworks, furniture, and other decorative elements that require an appealing aesthetic.
Material group | Plastic |
Minimum age | 12 years |
Documents | |
Item number | 24442609 |
Manufacturer | Dipon |
Category | Crafting |
Manufacturer no. | EPH3DB50-00150 |
Release date | 3.3.2023 |
Colour | Transparent |
Exact colour description | Transparent |
Material group | Plastic |
Minimum age | 12 years |
CO₂-Emission | |
Climate contribution |
Weight | 1500 g |
Ingredients | Attention DANGER Hazard statements for the resin H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H411 Toxic to aquatic life with long lasting effects. Precautionary statements on resin P261 Avoid breathing dust / fume / gas / mist / vapour / spray. P280 Wear protective gloves/protective clothing/eye protection/face protection. P273 Avoid release to the environment. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, if possible. Continue rinsing. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard statements for hardener H302+H312 Harmful if swallowed or in contact with skin. H318 Causes serious eye damage. H411 Toxic to aquatic life with long lasting effects. Safety instructions for hardener P280 Wear protective gloves/protective clothing/eye protection/face protection. P273 Avoid release to the environment. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, if possible. Continue rinsing. P310 IF SWALLOWED Immediately call a POISON CENTER/doctor. P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. |
Instructions for use | The matching resin EpoxyPlast 3D (component A) and hardener B50 DeepPour (component B) are precisely weighed out in a mixing ratio of 2:1 by weight in a clean container. Never mix by volume, as this can lead to an incorrect result. To ensure thorough mixing, a scale and two sufficiently large mixing cups are required. Mix components A and B in a clean mixing cup at a maximum speed of 300 revolutions/min. (prevents bubbles from forming) for approx. 3-4 minutes. Then pour the mixture into a new clean container ("repot") and remove the resin adhering to the edges of the first container and allow it to drip into the mixture. Now mix again for 3-4 minutes. This two-stage process is important in order to obtain a mixture that is as homogeneous as possible. After mixing, colours or effect pigments can be added to the potting compound as desired. EpoxyPlast 3D B50 DeepPour is ideal for use with transparent colours due to its crystal-clear, low-viscosity consistency. The maximum pouring height/sealing height depends on the hardener used, the room temperature and the volume. As a general rule, the higher the room temperature and the larger the quantity mixed, the lower the possible casting height while maintaining the same level of transparency. The recommended casting height for hardener B50 DeepPour at a room temperature of 20°C is at least 1 mm to a maximum of 50 mm. At a maximum room temperature of 15°C and a maximum object diameter of 12 cm, this hardener can also be used to realise higher pours of up to 350 mm in one piece. Important notes: Mixing components A (resin) and B (hardener) in a mixing ratio of 1:1 leads to incomplete curing and therefore to a faulty result. If the resin (A component) is milky, lumpy or solid, this is due to crystallisation. This is caused by cold and can be reversed by a water bath (50-70°C). Store the resin sealed at room temperature and avoid temperature drops, high humidity and direct sunlight over a longer period of time. |
GHS07 Health hazard
GHS09 Environmentally harmful- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H411 Toxic to aquatic life with long-lasting effects.
Compare products
Goes with
Reviews & Ratings
Warranty score
How often does a product of this brand in the «Crafting» category have a defect within the first 24 months?
Source: Digitec Galaxus- DiponNot enough data
- 1.Abig0 %
- 1.Craft Line0 %
- 1.Djeco0 %
- 1.Essdee0 %
Warranty case duration
How many working days on average does it take to process a warranty claim from when it arrives at the service centre until it’s back with the customer?
Source: Digitec Galaxus- DiponNot enough data
- 1.Glorex0 days
- AbigNot enough data
- AquabeadsNot enough data
- ColorationsNot enough data
Return rate
How often is a product of this brand in the «Crafting» category returned?
Source: Digitec Galaxus- DiponNot enough data
- 1.Aquabeads0 %
- 1.Colorations0 %
- 1.PlayMais0 %
- 1.Studio Light0 %