Question about Feller EDIZIOdue Smart Light Control for Philips Hue

You have to press for approx. 30 seconds... then everything is reset.

If the module is integrated into a single rocker switch, you must remove the caps to expose all the buttons. A button can be pressed by holding down the contact of this button and then pressing the power bar.

To pair it, press and hold the corresponding button for that channel for at least 7 seconds.

Once the device is paired, you must confirm the channel. To do this, press A1 and B0 simultaneously. Important: Do not press any other buttons between this and pairing.

If you want to pair it with another channel, you must reset the device to the factory settings. This can be done by pressing all buttons (A0, A1, B0 and B1) simultaneously for at least 7 seconds.

Alternatively, you should be able to reset the switch using the following pattern:

Press top left (A0)
Press and hold top right (B0) for about 10 seconds
Press top right (B0) and bottom left (A1) at the same time.
Press top left (A0) Note: Please ensure that the module is positioned the right way round.