Best Brennenstuhl products in the Workshop lighting category
On this page you'll find a ranking of the best Brennenstuhl products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Brennenstuhl hand lamp
LED work lamp with 200 lumen and a lighting duration of up to 12h. Five different working modes: 100% - 40% - 10% - red - red flashing. Thanks to its practical clip, it can be attached e.g. to bags or belts, and thanks to the magnet in the base, it can also be attached to metal surfaces. Integrated Li-Pol battery 3.7V/450mAh with charging indicator. Including USB charging cable.
2. Brennenstuhl Hybrid spotlight CH 6052 MH
Thanks to the brennenstuhl Multi Battery 18V System, the extremely robust and bright Multi Battery LED Hybrid Spotlight with 60 W power is compatible with 38 different 18V rechargeable batteries (different Ah classes) from the five power tool manufacturers Bosch Professional, Makita, Dewalt, Milwaukee, Metabo CAS. So no matter which battery system is already in use, the interface technology allows maximum flexibility and it is possible to fall back on the battery system of your choice. With just a flick of the wrist, the appropriate adapter (all included) can be inserted at the interface. Thanks to hybrid technology, the impact-resistant working spotlight with built-in COB LEDs can be controlled by battery and mains operation. Even in the event of a power failure, the LED spotlight ensures safety by automatically switching from mains to battery operation. Furthermore, it has a battery status display for the remaining energy of the batteries used (the batteries must be charged externally) and a protection system for Power-Tool batteries. This protects the batteries from deep discharge and overheating. In addition, the Multi Battery LED Spotlight convinces with the following features: With plug-in cable connection and 5m detachable cable (H05RN-F 2X1.0). With on/off switch. LED spotlight with anti-tilt protection, protects lens and housing of the spotlight. Ergonomic handle. Tripod mounting possible. Lighting time depending on the battery used: approx. 20min/1Ah at 100% light output, approx. 27min/1Ah at 75% light output, approx. 40 min/1Ah at 50% light output, approx. 80 min/1Ah at 25% light output. Power consumption: 61.6 W. Luminous flux: 6200 lm. Protection class: IP65. Protection class: II. Impact resistance: IK08. Category 2 (K2) equipment: for use in harsh environments with high mechanical, physical and chemical impact. Without battery and charger.
3. Brennenstuhl Rufus
The mobile LED rechargeable spotlight RUFUS 3000 MA by Brennenstuhl is an extremely robust LED work light with 30W power that meets the highest demands. With a housing made of solid die-cast aluminium and additional edge protection made of plastic, it is suitable for both indoor and outdoor use. The working spotlight has a built-in rechargeable battery, which has a charging time of approx. 5 hours and also a switch with light function that allows a dimming of 100% - 75% - 50% - 25% - 10%. The installed LEDs convince by their exceptionally long life span and their special light scattering for large-area illumination. The charging of the construction spotlight is done via the charging interface and with the help of the supplied charging cable type A/C.
4. Brennenstuhl Working spotlight
Thanks to the special clamping device, the compact LED work light can be attached to work surfaces, pipes, panels, etc. by clamping it on without much effort, thus providing a bright, glare-free light and free hands when working. Thanks to the ball bearing and the integrated ball joint, the angle of inclination of the LED construction spotlight can be flexibly adjusted by almost 360° and individually aligned in all directions.
5. Brennenstuhl Hybrid construction spotlight
Compatible with 44 different 18 V batteries (different Ah classes) from the 7 power tool manufacturers: Bosch Professional, Dewalt, Festool, Flex, Makita, Metabo CAS, Milwaukee. With 4 switching levels (100% - 75% - 50% - 25%) and protection system for Power-Tool batteries: protected against deep discharge, overheating (caused by high load currents) and battery faults. With 5 m detachable cable (H07RN-F2X1.0) with hybrid technology: battery and mains operation possible, also with automatic switchover from mains to battery in case of possible power failure. With 12500 lm for optimum light distribution and large-area illumination with glare-free and impact-resistant working light. Battery and adapter not included.
6. Brennenstuhl Construction spotlight
Thanks to the brennenstuhl Multi Battery 18V System, the extremely robust and bright Multi Battery LED battery spotlight with 40 W power is compatible with 38 different 18V batteries (different Ah classes) from the five power tool manufacturers Bosch Professional, Makita, Dewalt, Milwaukee, Metabo CAS. So no matter which battery system is already in use, the interface technology allows maximum flexibility and it is possible to fall back on the battery system of your choice. With just a flick of the wrist, the appropriate adapter (all included) can be inserted at the interface. The impact-resistant work light with enormous luminosity thanks to built-in COB LEDs also has a battery status display for the remaining energy of the battery used (the batteries must be charged externally) and a protection system for Power-Tool batteries.
7. Brennenstuhl Mobiler LED Strahler EL 4052 M / LED Baustrahler 49,9W für den Innen- und Außenbereich IP65 (LED
The mobile LED spotlight EL 4052 M from Brennenstuhl is a compact LED construction spotlight with 49.9W power, which can be used both indoors and outdoors. It can be easily folded for transport or storage, making it very handy and space-saving at the same time. In addition, the LED work spotlight convinces with the following features:Space-saving due to foldable frameSpotlight can be continuously swiveled and lockedSuitable for mounting on brennenstuhl tripodsCable length: 5 mCable designation: H07RN-F 3G1.0Power: 49.9 WLuminous flux: 4500 lumensColor temperature: 6500 KSProtection class IP65: Dust-tight and jet-proofIK08.
Workshop lighting
77.60
Brennenstuhl Mobiler LED Strahler EL 4052 M / LED Baustrahler 49,9W für den Innen- und Außenbereich IP65 (LED
F
1
8. Brennenstuhl CL 4050 MA
Thanks to the special clamping device, the compact LED work light can be attached to work surfaces, pipes, plates, etc. by clamping without much effort and thus offers a bright, glare-free light and free hands when working. Thanks to the ball bearing and the integrated ball joint, the inclination angle of the LED construction spotlight can be flexibly adjusted by almost 360° and individually aligned in all directions.
9. Brennenstuhl brennenstuhlConnect WiFi LED spotlight WF 2050 P (20W, 2400lm, IP54, various light functions via
The WiFi LED spotlight with motion detector WF 2050 P from brennenstuhlConnect for wall mounting is ideally suited for outdoor illumination thanks to the IP54 protection rating (dust and splash-proof). Thanks to the integrated WiFi module, the smart floodlight with super-bright Everlight SMD LEDs can be easily and conveniently controlled via the free brennenstuhlConnect app, which can also be used to set various light functions, such as brightness adjustment or colour temperature. In addition, the WLAN LED spotlight convinces with the following features:Detection range up to 12 m, with detection angle 120°Day/night sensor sensitivity and light duration 5sec to 60minControl of various light functions via brennenstuhlConnect AppVoice control via Amazon Alexa or Google AssistantSpotlight head can be swivelled horizontally and verticallyWith Everlight brand LEDsPower: 20 WLuminous flux: 2400 lmColour temperature: 3000 - 6500 KSProtection class: IP54.
Workshop lighting
57.40
Brennenstuhl brennenstuhlConnect WiFi LED spotlight WF 2050 P (20W, 2400lm, IP54, various light functions via
E
1
10. Brennenstuhl LED universal hand lamp
Compact, handy and versatile. 8 superbright SMD-LEDs with special lens optics. More than 4 hours of light duration with full batteries. Additional switching stage for 1 SMD LED in the lamp head. Plastic bracket with integrated magnet, 200° bendable. 360° rotatable hook and magnet for optimal mounting. With on/off switch. Packed in blister. LEDs: 8 + 1 SMD; luminous flux: 250 + 100 lm; battery type: 3 x AA; colour temperature: 6500 K; operating time: 4 h / 10 h; dimensions: 5.5 x 4.7 x 21.5 cm
