Best wolfcraft products in the Workbenches category
On this page you'll find a ranking of the best wolfcraft products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. wolfcraft wolfcraft 1 Multifunktions-Auflagen- u. Rollenbock
The multifunctional support and roller trestle is ideal for placing, feeding or unrolling long boards, planks or panels. Its infinitely height-adjustable base frame makes it compatible with all standard machine tables and workbenches. With the fixed 300 mm wide support, you can extend the support surface of your workbench or support long workpieces. Simply rotate the support by 90° to switch to the bearing-mounted support surface. The workpiece slides through the ball bearings, allowing you to conveniently feed and move the workpiece in any desired machining direction. With a further 90° rotation, you can switch to the roller support. This makes feeding in the longitudinal direction easier. When you have finished working, you can fold up the multifunctional support and roller stand in just a few seconds for space-saving storage.
2. wolfcraft wolfcraft 1 MASTER 750 ERGO Spanntisch
Whether as a clamping or machine table, the MASTER 750 ERGO from wolfcraft offers you ergonomics, safety, and versatility across the board. The table can be adjusted to a comfortable and back-friendly working height between 725 and 950 mm in six stages. Thanks to the locking points at each stage and the extension safety feature, the MASTER 750 ERGO also provides maximum safety for use with machines. You can easily secure your miter saw or wolfcraft drill stands on the tabletop. As a special extra, the MASTER 750 ERGO is equipped with a quick adjustment feature. By pulling the levers on the right and left under the tabletop, you can unlock the quick adjustment and quickly and comfortably move the front tabletop towards the workpiece. Just tighten it 2-3 times with the cranks, and the workpiece is securely and firmly clamped. The time-consuming cranking to bring the table to the workpiece is eliminated. As a clamping table, the MASTER 750 ERGO offers a horizontal clamping range of 130 mm between the tabletops and 425 mm between the four large plastic clamping jaws included. At maximum height adjustment, you can also easily clamp workpieces up to 110 mm wide vertically. The clamping jaws feature a reversible painting tip, making it easier for you to paint workpieces quickly. If you want to raise a workpiece, use the side with the support pin and anti-slip pad. With the two additional pipe clamps, you can also reliably hold rounded workpieces in position. As a work table, the MASTER 750 ERGO also impresses with working comfort and flexibility. The adjustable tabletops made of coated, FSC-certified MDF with beveled edges provide a work surface with a variable size of 680 x 390-520 mm.
3. wolfcraft wolfcraft 1 MASTER cut 2600 Maschinentisch EU
The multifunctional MASTER cut 2600 machine table combines 6 functions in one product. It can be used as a circular table saw, jigsaw table, cross-cut and mitre saw table, work station and - with the optional accessories - as a router table and station for guided hand-held circular saws. This makes the MASTER cut 2600 ideal for all interior finishing trades. Thanks to the separately available and removable riving knife, it is one of the few machine tables that you can also use with riving knife-less hand-held circular saws. The machine plate is equipped with a safety lock that reliably secures the plate and machine. It is also height-adjustable and offers you a level transition to the worktop, even with heavy equipment. The MASTER cut 2600 is compatible with many commercially available machines, regardless of manufacturer. The safety switch is positioned on the side of the table so that you can switch your machines on and off quickly and safely. When used as a circular table saw, the rip fence allows you to make guided cuts up to a cutting width of 625 mm. The angle fence is equipped with spring-loaded levelling and sliding elements. It allows you to make angle cuts of up to +/- 60° in series with ease. The four clamping blocks included allow you to powerfully fix workpieces with clamps to the profile of the table. The clamping blocks can be moved to suit your workpiece using the Allen key included. They also serve as feet for the folded table so that it can be stored free-standing with minimal space requirements. With a load capacity of up to 120 kg, the machine table can even support solid wooden panels with ease. This means you are safely and effectively prepared for countless challenges around the house and home with just one product.
4. wolfcraft wolfcraft 1 Rollenbock, lose
With the height-adjustable and foldable roller stand, you create an optimal extension for your sawing table or workbench. The 300 mm wide support surface allows you to effortlessly and smoothly guide your workpieces in the desired processing direction. You can perform sawing or milling tasks on long workpieces in a controlled and energy-efficient manner with this helper. Thanks to the stepless height adjustment, you can adapt the roller stand to all standard machine tables and workbenches. After finishing your work, you can fold the roller stand together in seconds and store it space-savingly in the smallest space.
5. wolfcraft wolfcraft 1 Sägebock 700x1120x675mm
The sawhorse is a powerful and space-saving helper for sawing firewood. It has an exceptionally large capacity for a scissor saw. You can saw several 1.00 metre logs into 25 or 33 cm long pieces in a single operation. The wheelbarrow is full in 2-3 cuts without you having to switch off the saw in between. An ejection guard prevents dangerous pieces of wood from hitting each other and secures them between the struts for greater safety. Of course, we have also thought about tool protection: if a cut does go wrong, beech boards protect the chain of your chainsaw in the working area. With a folding size of 132 cm wide, 112 cm high and 11.5 cm deep, you can store the mobile and compact sawhorse made of sturdy round tubes in the garage to save space when your employees are done. With the sawhorse from wolfcraft, safety and job satisfaction are guaranteed.
6. wolfcraft wolfcraft 1 MASTER 650 ERGO Spanntisch
The MASTER 650 ERGO is a height-adjustable, mobile clamping table that allows you to work flexibly and without straining your back. With its table top that can be swivelled up to 65°, it can be used both as a clamping table and as a work table. The optimum working height can be individually adjusted to your height from 780 - 950 mm using a smooth-running pull-out mechanism with pull-out safety device.
The four plastic jaws supplied for a wide range of clamping options and two tube clamps for clamping round material allow you to hold your workpieces reliably in position. The MASTER 650 ERGO offers a clamping width of 110 mm between the table tops and up to 410 mm between the plastic clamping jaws. With maximum height adjustment, you can also easily clamp workpieces up to 80 mm wide vertically. Thanks to the insert board supplied, you can extend the coated table top made of FSC-certified MDF with bevelled edges to a continuous work surface of 650 x 490 mm in no time at all and are therefore also equipped for larger workpieces.
The sturdy tubular steel base frame has a quick-folding function for flexible transport and space-saving storage. Despite its high load capacity of up to 120 kg, the MASTER 650 ERGO weighs just 13.1 kg. The table is easy to transport thanks to the chamfered carrying tray and the oval, smooth aluminium bar. The clamping table also scores points for ergonomics in the details: the plastic clamping jaws or tools can be stored in the tool bar with integrated holders. Thanks to the high-quality Made in EU quality, the product is guaranteed to last for 10 years.
7. wolfcraft wolfcraft 1 MASTER 200 - Spann- und Arbeitstisch
The MASTER 200 is a foldable, universal clamping and work table with a durable MDF top. It offers you a comfortable working height of 80 cm. With the integrated tool bar, you have your tools quickly to hand. You can divide the 64.5 x 30 cm table surface of the MASTER 200 using 2 cranks. You can securely and effortlessly fix workpieces up to 14.5 cm wide in the resulting space. For larger clamping widths of up to 36.5 cm, you can use the plastic jaws supplied, which you simply place in the recesses provided in the table top. 4 plastic jaws for flat clamping are included in the scope of delivery. The MASTER 200 can be folded flat and space-saving to 64.5 x 19 x 105 cm using a sturdy quick-folding mechanism with eccentric levers. Although it only weighs 12 kg, the table can be loaded with 180 kg and is stable when in use. This means that it not only offers you flexibility, but also optimum stability.
8. wolfcraft Machine Table MASTER cut 2600
The multifunctional Master cut 2600 machine table combines 6 functions in one product. It can be used as a circular saw bench, jigsaw table, cross-cut and mitre saw table, work station and - with the optional accessories - as a routing table and station for guided hand-held circular saws. This makes the Master cut 2600 ideal for all interior finishing trades. Thanks to the separately available and removable riving knife, it is one of the few machine tables that you can also use with riving knife-free circular handsaws. The machine plate is equipped with a safety lock that reliably secures the plate and machine. It is also height-adjustable and offers you a level transition to the worktop, even with heavy equipment. The Master cut 2600 is compatible with many commercially available machines, regardless of manufacturer. The safety switch is positioned on the side of the table so that you can switch your machines on and off quickly and safely. With safety switch version CH.
9. wolfcraft wolfcraft 1 WSS 620 - Workbench 1130mm pre-conf.
The Wolfcraft workbench kit with assembly instructions and quick assembly system is manufactured with smooth-running drawers made of highly impact-resistant plastic and can bear loads of up to 25 kg. The drawers can be removed at any time. This means you can quickly take your tools with you to the place of use. It also has a height-adjustable foot to compensate for uneven surfaces. The workbench tops are pre-drilled, nuts are pre-assembled and embedded. The table has a load capacity of 600 kg.
10. wolfcraft Master Cut 1500 EU
New universal work and machine table in accordance with the latest EU safety regulations. Designed for precise stationary use of circular saws, jigsaws, and routers.
