Waste containers
CHF139.45
eurokraft pro Large plastic waste garbage can, according to DIN EN 840
120 l
Best eurokraft pro products in the Waste containers category
On this page you'll find a ranking of the best eurokraft pro products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. eurokraft pro Large plastic waste garbage can, according to DIN EN 840
Large plastic waste garbage can, according to DIN EN 840, volume 120 l, WxHxD 482 x 933 x 552 mm, blue.
Reinforced design. According to DIN EN 840. Robust and durable, made of temperature and chemical resistant low pressure polyethylene. Large holding volume with low weight. 2 rubber-tired wheels. Lid recoil damping.
Noise-reduced large waste garbage cans due to lid kickback damping: the loud banging of the lid on the back of the bin when opening is prevented. Particularly robust, reinforced design for heavy-duty use. Garbage bag holder available as an accessory.
2. eurokraft pro Chip tipping trough, low design
Tilting skip for metal swarf, low profile design, capacity 250 litres, light blue. Oilproof and watertight. Easy separation of solids and liquids. Tilting skip with handle. Ideal for collecting and separating swarf and liquids. Sieve plate and 1-inch drain tap for separating fluids from solids. Base frame with forklift pockets. Secured against unintentional slippage and tipping.
3. eurokraft pro Chip tipping trough
Chip tipping trough, volume 250 liters, black-grey.
Oil and water tight. Easy separation of solids and liquids. Tilting trough with handle.
Box-shaped chip tipping skip with low dumping edge and manual tipping function. Ideal for collecting and separating chips and liquids. Strainer plate and drain cock 1'' for separating liquids from solids. Tilting trough with handle. Base frame with drive-in pockets. Oil and water tight. Safety device against unintentional slipping and tipping.
4. eurokraft pro Gas cylinder grid container
Gas cylinder grid container, without roof, featuring a double wing door, dimensions WxD 3100 x 1500 mm. Designed for outdoor storage of gas cylinders in accordance with TRGS 510. Constructed from sturdy, hot-dip galvanised steel frame. Rear walls, side walls, and hinged gates are made of mesh grating for optimum ventilation. Wing gates are lockable with a profile cylinder. Designed for self-assembly. Does not include a mesh shelf as standard. Prepared for floor fixing. The double wing gate is ideal for gas bottle pallets. Supplied disassembled for easy assembly.
5. eurokraft pro Tilting skip with tilting mechanism, low construction, capacity 0.4 m³, black
Tilting skip with a tilting mechanism, low construction, and a capacity of 0.4 m³ in black grey RAL 7021. It features an extremely low profile design for collecting and disposing of bulk material and production waste. The low front edge allows for use where materials are ejected from machines at a low level. The tilting tray includes a handle for manual release of the tilting mechanism and can be used as a tilting tray for metal swarf with an optional drain tap and sieve plate. The maximum load is up to 300 kg.
Constructed from sturdy steel sheet with rim reinforcement, it is welded to be oil- and watertight. The base frame includes forklift pockets, and the maximum load is 300 kg. A safety chain is included to protect against unintentional slippage and accidental release of the tilting mechanism. When using as a tilting tray for metal swarf, please order the optional drain tap and sieve plate as accessories.
Waste containers
CHF928.58
eurokraft pro Tilting skip with tilting mechanism, low construction, capacity 0.4 m³, black
400 l
6. eurokraft pro Silo container, sectional steel
Silo container, sectional steel, mobile, volume 375 l, fire red. Designed for metered emptying of fine-grained bulk material, it features a robust welded construction. The frame is made of sectional steel, and the hopper is constructed from 2 mm thick sheet steel with all-round reinforcement. It includes a sliding closure with a special seal at the bottom of the hopper. The hot-dip galvanized version complies with EN ISO 1461. It has 2 swivel and 2 fixed castors made of polyamide, with a wheel diameter of 180 mm, and one swivel castor includes a brake. The overall height is 220 mm, and it comes with an additional push handle. Hopper dimensions are 1010 x 780 x 1000 mm.
7. eurokraft pro Compact tilting skip, capacity 0.5 m³, reseda green.
Compact tilting skip, capacity 0.5 m³, reseda green. With a robust roller system, it tilts at any height via a rope pull from the driver's seat. It is secured against unintentional slipping and tilting, with an optimised load centre. The skip can be moved with a pallet truck or forklift. It features a sturdy base frame and a skip that is 3 mm thick with an all-round edge profile. Tilting skips are also available in other RAL colours at an extra cost. Please ask for details.
8. eurokraft pro Mini tilting skip for chippings, capacity 0.225 m³, grey RAL 7005.
Mini tilting skip for chippings, capacity 0.225 m³, grey RAL 7005. Sieve plate and drain tap 1'' for separating fluids from solids. Tilting at any height via cable pull from driver's seat. Optimised load centre. Secured against unintentional slipping and tilting. Container 3 mm with all-round edge profile. Stable base frame with forklift pockets. The small entry level model with a front edge height of 455 mm. Wheels and oil-tight and watertight coating available on request.
Waste containers
CHF1270.18
eurokraft pro Mini tilting skip for chippings, capacity 0.225 m³, grey RAL 7005.
225 l
9. eurokraft pro BSL stacking tilting skip for metal swarf, capacity 0.9 m³, hot dip galvanised.
Chip stack tipper BSL with perforated sheet metal bottom, volume 0.9 m³, hot-dip galvanized. Perforated sheet metal intermediate floor and 1'' drain valve on the discharge wall. Smooth bottom (3 mm). Oil and waterproof. Emptying with traverse type BST via cable pull from the forklift seat. Stackable three times when filled.
The chip stack tipper BSL with perforated sheet metal bottom is a specialized container for separating liquids from solids, as well as for disposing of and collecting bulk materials and other industrial waste. This versatile tipping container is robust and resistant to the harsh conditions of industrial environments. Up to three containers can be stacked, even when filled, making storage easier. The chip stack tipper is designed for easy lifting, transporting, and emptying with a forklift or pallet truck. It is a practical solution for the challenges of waste management and material handling in warehouse and logistics areas, recycling, and beyond.
Waste containers
CHF1702.58
eurokraft pro BSL stacking tilting skip for metal swarf, capacity 0.9 m³, hot dip galvanised.
900 l
10. eurokraft pro BSS stacking tilting skip for metal swarf, capacity 2 m³, yellow orange.
Shavings stack dumper BSS with sieve plate insert, volume 2 m³, yellow-orange. Sieve plate and drain valve 1'' on the discharge wall. Smooth bottom (3 mm). Oil and waterproof. Dumping with traverse type BST via cable pull from the forklift seat. Stackable three times when filled.
The shavings stack dumper BSS with sieve plate insert is a specialized container for separating liquids from solids, as well as for disposing of and collecting bulk materials and other industrial waste. This versatile tipping container is robust and resistant to the harsh conditions found in industrial environments. Up to three containers can be stacked - even when filled - making storage easier. The shavings stack dumper is designed for easy lifting, transporting, and emptying with a forklift or pallet truck. It is a practical solution for the challenges of waste management and material handling in warehouse and logistics areas, recycling, and beyond.
Waste containers
CHF1621.50
eurokraft pro BSS stacking tilting skip for metal swarf, capacity 2 m³, yellow orange.
2000 l