Ventilation technology
−31%
only 1 of 2 remaining on sale
CHF168.– was CHF243.–
Stiebel Eltron ZLWE 40-2
Best selling Ventilation technologies from Stiebel Eltron
On this page you'll find a ranking of the best Stiebel Eltron products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Stiebel Eltron ZLWE 40-2
Stiebel Eltron control set ZLWE 40-2 The control set consists of the control unit, the power supply unit and an operating unit for controlling the ventilation units. The control unit uses an LED to indicate when the filter needs to be cleaned or replaced. The display depends on the operating time. The control unit is mounted in the flush-mounted box supplied. The power supply unit is designed for top-hat rail mounting.
2. Stiebel Eltron FMS 4-10 ABL Inverter filter mat set for LWZ integral unit, G4, 10 pieces
The FMS 4-10 ABL Inverter Filter Mat Set from Stiebel Eltron consists of 10 high-quality filter mats specifically designed for use in ventilation systems. These filter mats are made from synthetic non-woven fabric and are free from chemical binders, highlighting their eco-friendliness. With a filter class of G4, they provide effective filtration, retaining more than 60% of coarse particles. The progressive density and optimized fabric construction ensure excellent dust storage capacity while maintaining low pressure loss. This makes the set an ideal choice for anyone who values efficient air purification in their ventilation systems.
- Eco-friendly materials without chemical binders
- High dust storage capacity with low pressure loss
- Optimized fabric construction for improved filtration
- Suitable for various LWZ integral devices.
Ventilation technology
CHF32.37
Stiebel Eltron FMS 4-10 ABL Inverter filter mat set for LWZ integral unit, G4, 10 pieces
3. Stiebel Eltron Accessories
Stiebel Eltron Accessory Cond C125
Manufacturer: Stiebel Eltron
Designation: Accessory Cond C125
Type: Cond C 125
Design: other
Material of the duct: plastic
Material quality of the duct: other
Production type: other
Material of the insulation: other
Surface protection outside: other
Surface protection inside: other
External color: white
Nominal diameter of the duct: 125 mm
Connection 1: other
Connection 2: other
Bend design: smooth bend
Angle of the bend: 139.5 °
The 90-degree bend with integrated condensate drain is made of plastic. This accessory allows for the safe drainage of condensate when the ventilation unit is mounted vertically. Thanks to its special design, the condensate can easily collect without being influenced by the airflow. With this connection, the ventilation unit can be used in warmer regions, as there is no risk of water leaking into the installation area even in high humidity. The 90-degree bend with condensate drain simplifies installation in confined spaces. The bend allows the ventilation unit to be installed not only horizontally on the ceiling but also vertically on the wall. Compatible with ventilation ducts DN 125. Easy to screw on with standard market condensate pipe DN 32.
4. Stiebel Eltron Outer screen LWE 40
The LWE 40 external cover from Stiebel Eltron is a high-quality accessory for ventilation technology, specifically designed for outdoor use. Made from robust, brushed stainless steel, this cover not only offers an appealing look but also high resistance to weather influences. With its compact dimensions, the external cover integrates harmoniously into various architectural styles and ensures effective air circulation. The LWE 40 BA S is ideal for use in residential and commercial properties, contributing to improved air quality. The careful craftsmanship and thoughtful design make this product a reliable choice for those who value functionality and aesthetics.
- Made from high-quality, brushed stainless steel for durability and corrosion resistance
- Optimized for effective air circulation in outdoor areas
- Versatile for use in various building types and styles.
5. Stiebel Eltron LTM TL 1230 BA VA E6
Stiebel Eltron external bonnet stainless steel BA VA E6W R2 S4
Manufacturer: Stiebel Eltron
Designation: External bonnet stainless steel LTM TL 1230
Type: BA VA E6W R2 S4
Material: Stainless steel
Nominal width duct: 260 mm
Nominal height duct: 250 mm
Front width: 284 mm
Front height: 279 mm
Installation depth: 155 mm
With wire mesh: No
With insect screen: No
With pressure relief flap, blow-out: No
With pressure relief flap, intake: No
With counter-rotating flap valve: No
With co-rotating flap valve: No
With installation frame: Yes
Lockable: No
Motor-controlled: No
Colour: White
Further details: External bonnet for wall termination on the facade. The mounting frame has an integrated drip edge and a bird protection grille for mounting on the telescopic housing. Sealing to the plaster level is achieved using a sealing tape. Any condensation is safely drained away from the plaster level.
6. Stiebel Eltron LWE-W 115 P FG VA SB
The LWE-W 115 P FG VA SB facade grille from Stiebel Eltron is a high-quality solution for building ventilation. Made from stainless steel, it offers a durable and corrosion-resistant construction suitable for various applications. With a nominal width of 70 mm and a nominal height of 316.5 mm, this facade grille is designed to allow efficient air circulation. The front width is 260 mm and the front height is 250 mm, ensuring optimal integration into the facade. The installation depth of 50 mm facilitates easy installation. The grille is equipped with a mounting frame, which simplifies the assembly process. It is a practical choice for anyone who values functionality and quality.
- Made from stainless steel for high durability
- Integrated mounting frame for easy installation
- Optimal air circulation through thoughtful design
- Suitable for various applications in building ventilation.
7. Stiebel Eltron End cover
The end cap from Stiebel Eltron is a high-quality accessory for ventilation technology, specifically designed for pipes with a diameter of 160 millimeters. Made from galvanized steel sheet, this end cap provides a durable and corrosion-resistant solution for various applications in air management. With a length of 40 millimeters, it ensures a precise and secure seal that meets the demands of modern ventilation systems. The end cap is manufactured in the Czech Republic and combines functionality with a solid construction that ensures reliable performance. It is an essential component for anyone seeking an effective and efficient ventilation solution.
- Made from galvanized steel sheet for increased durability
- Designed for pipes with a diameter of 160 mm
- Secure sealing with a length of 40 mm.
8. Stiebel Eltron Telescopic housing 800mm for LWE40
Stiebel LWE 40 TG-800 housing 236663.
9. Stiebel Eltron LVE Ü 180-5
The Stiebel Eltron air distribution system LVE Ü 180-5 is an innovative product designed for efficient air distribution in various applications. It is an uninsulated duct system made from high-quality polyethylene (PE). With its rigid bending behavior, it offers stability and durability. The system is specifically designed for use in flat and flexible air distribution systems, allowing for easy installation. The seamless construction enhances the integrity of the system and minimizes potential leaks. The gray exterior color ensures discreet integration into various environments. The LVE Ü 180-5 is a practical element for anyone seeking a reliable air distribution solution.
- Seamless construction from polyethylene (PE) for increased stability
- Suitable for flat and flexible air distribution systems
- Plug-in connections for easy installation.
10. Stiebel Eltron FG-S air grille for the LVE FA floor diffuser, suitable for the floor in the supply air area
The FG-S air grille for the floor outlet LVE FA is a high-quality solution for ventilation technology in the supply air area. It has been specifically designed for use in the floor and provides effective air circulation. The grille is made of stainless steel and features a modern design with an asymmetrically arranged perforation pattern that is both functional and aesthetically pleasing. With a width of 180 mm and a length of 340 mm, it fits into various floor outlet systems and is approved for use in Germany, France, and the Czech Republic. This product combines durability and attractive design to ensure optimal air distribution in indoor spaces.
- Made of stainless steel for high durability
- Asymmetrical perforation pattern for improved air circulation
- Approved for use in Germany, France, and the Czech Republic.
Ventilation technology
CHF114.–
Stiebel Eltron FG-S air grille for the LVE FA floor diffuser, suitable for the floor in the supply air area
