Best Van der Valk Solar Systems products in the Solar energy equipment category

1. Van der Valk Solar Systems 774221 Hammer-head bolt M8x20mm + lock nut

This stainless steel hammer head screw M8x20mm with locking nut from Van der Valk is designed to attach the aluminum angles (VDV-729520) to roof hooks, thereby enabling a vertical installation of the Side++ aluminum profiles to the ridge of the roof. Stainless steel is a rust-resistant and weather-resistant metal. Use the Van Der Valk planning tool to calculate your required components, and check the assembly instructions in the download section. more

Solar energy equipment

CHF4.–

Van der Valk Solar Systems 774221 Hammer-head bolt M8x20mm + lock nut

Solar system mounting material

2. Van der Valk Solar Systems 729530 Aluminium Slimline roof hook 40-50mm

This slimline roof hook from Van der Valk is designed for the installation of an aluminum profile and has a size range of 40 to 50 mm. Aluminum is a rust-free and weather-resistant lightweight metal. Therefore, this roof hook is ideal for securing your solar panels. Use the Van Der Valk planning tool to calculate the components you need and check the installation instructions in the download section. more

Solar energy equipment

CHF7.–

Van der Valk Solar Systems 729530 Aluminium Slimline roof hook 40-50mm

3. Van der Valk Solar Systems 747920 Stainless steel suspension bolt M12x250mm

This stainless steel mounting bolt from Van der Valk, with product number 747915, is designed for the installation of solar panels on roofs. The bolt is screwed into the wooden substructure of the roof. Subsequently, a stud screw clamp (721100) is attached to the bolt, to which a Side++ aluminum profile can then be mounted. This stainless steel screw from Van der Valk comes with 1 EPDM seal and 1 locking nut, making it suitable for wooden beams. It measures 12×250 mm and must be used together with a stud screw clamp to secure the screw to the aluminum profile. The bolt can be mounted on common roof types, such as tile, steel, Eternit, and corrugated metal roofs. more

Solar energy equipment

CHF11.–

Van der Valk Solar Systems 747920 Stainless steel suspension bolt M12x250mm

Solar system mounting material

4. Van der Valk Solar Systems 750520 Concrete mass block outdoor installation ValkPro+ L10

This mass block/concrete foot from Van der Valk with the product number VDV - 750520 is designed for mounting solar panels on the ground. It replaces the rubber feet 729622 for ground mounting. No additional concrete blocks are needed for weighting. It allows the mounting system to be weighted down, providing protection against wind. The concrete foot is secured with screw 774065 and washer 774009. When mounting on soil, grass, fields, etc., it is necessary to place a high-quality root barrier membrane underneath. The foot is not visible in the videos, but it can be found in the assembly instructions ValkPro L10 on page 29. more

Solar energy equipment

CHF32.–

Van der Valk Solar Systems 750520 Concrete mass block outdoor installation ValkPro+ L10

Solar system mounting material

5. Van der Valk Solar Systems 739006 Plastic cover cap for intermediate terminal - black

This black plastic cover cap from Van der Valk is designed to cover the intermediate clamps, achieving a uniform black design with black solar modules.

Solar energy equipment

CHF4.–

Van der Valk Solar Systems 739006 Plastic cover cap for intermediate terminal - black

Solar system mounting material

6. Van der Valk Solar Systems 724660 Front Foot with Centre Clamp Flat Roof Mounting ValkPro+ L10

This aluminum front mount with central clamp from Van der Valk, product number VDV-724660, is designed for the installation of solar modules on a flat roof and is part of the ValkPro+ L10 mounting system. more

Solar energy equipment

CHF19.–

Van der Valk Solar Systems 724660 Front Foot with Centre Clamp Flat Roof Mounting ValkPro+ L10

7. Van der Valk Solar Systems 701704670 Aluminium profile Side++ L=4670 mm

This rail from Van der Valk – 701704670 Aluminum Profile Side++ L=4670 mm is designed for the installation of solar panels on the roof, allowing you to easily attach your panels. Aluminum is a rust-free and weather-resistant lightweight metal. The rail can be mounted with various other Van der Valk products on common roof types, such as tile, steel, and Eternit roofs. This length is suitable for four panels with a width of 1134 mm. more

Solar energy equipment

CHF87.–

Van der Valk Solar Systems 701704670 Aluminium profile Side++ L=4670 mm

Solar system mounting material

8. Van der Valk Solar Systems 724661 Front foot with end clamps flat roof mounting ValkPro+ L10

This aluminum front rail with end clamps from Van der Valk, product number VDV-724661, is designed for mounting solar panels on a flat roof and is part of the ValkPro+ L10 mounting system. more

Solar energy equipment

CHF20.–

Van der Valk Solar Systems 724661 Front foot with end clamps flat roof mounting ValkPro+ L10

9. Van der Valk Solar Systems 729520 Aluminium bracket for roof hooks

This aluminum angle from Van der Valk is designed to be attached to roof hooks using the hammer head screws and the locking nut (VDV-774221), allowing for a vertical installation of the Side++ aluminum profiles in relation to the roof ridge. Aluminum is a rust-free and weather-resistant lightweight metal. Use the Van Der Valk planning tool to calculate the components you need and check the assembly instructions in the download section. more

Solar energy equipment

CHF6.–

Van der Valk Solar Systems 729520 Aluminium bracket for roof hooks

Solar system mounting material

10. Van der Valk Solar Systems 774390 Mounting screw for corrugated roofs 7x110 mm stainless steel with rubber seal

With this mounting screw for corrugated roofs from Van der Valk, the mounting bracket 747901 can be securely fastened if the existing screws are unsuitable. The screw is made of stainless steel and comes with a pre-installed seal. It is available in three lengths: 110 mm, 130 mm, and 150 mm. more

Solar energy equipment

CHF4.–

Van der Valk Solar Systems 774390 Mounting screw for corrugated roofs 7x110 mm stainless steel with rubber seal

Solar system mounting material