Best selling Marten repellents from Stop+Go

1. Stop+Go Scented disc

Fragrance concentrate based on animal fat with a large evaporation surface for intense scent release. Long-lasting effectiveness of at least 6 months. No assembly is required, and it comes with a band that indicates the expiration date to ensure timely replacement. more

Marten repellent

CHF16.70

Stop+Go Scented disc

125

2. Stop+Go Anti-marten spray

Highly effective fragrance concentrate with versatile application possibilities, with long-term effect. The fragrance concentrate is sprayed onto the self-adhesive fragrance reservoirs supplied. No large-area spraying of all endangered parts is necessary. A reliable long-term effect is achieved by filling the fragrance reservoirs monthly. Universally applicable in car, house, garden or carport. Also ideal to support other marten repellent measures. Advantages: Highly effective concentrate with long-term effect. Suffices up to 2 years. Also suitable for parking, garage, barn or attic. more

Marten repellent

CHF21.70

Stop+Go Anti-marten spray

115

3. Stop+Go Ultrasound

Highly effective, battery-operated ultrasonic device with a super-slim design. Ultrasonic waves in the frequency range of animal fear and warning cries signal the marten a high danger, thus deterring it from entering the engine compartment. By varying the tone frequency (pulsating sine wave), habituation effects are prevented. The battery operation makes the device completely independent of the vehicle's electrical system. The extremely low power consumption allows for a runtime of two years with two standard 3V button cells. Additionally, the use of batteries reduces the installation time of the device to just a few minutes, as it does not need to be wired. The new, high-quality piezo disc speakers achieve an effective sound emission angle of over 170°. A blinking LED light indicates operation and further irritates the marten. Water and dust resistant according to IP 65. Universally applicable, for example, in carports, homes, or boats. Ideal for long-term parking situations such as classic cars, motorhomes, used car lots, etc. more

Marten repellent

CHF53.90

Stop+Go Ultrasound

81

4. Stop+Go Marten repellent device

Highly effective ultrasonic device with a 12-volt vehicle connection. The change in tone frequency prevents habituation. A flashing LED light indicates operation and additionally irritates the marten. It features a high-quality piezo dome speaker, an effective radiation angle of 160°, frequency modulation, shock and splash-proof construction, maintenance-free operation, and easy installation. It also has an e1 certification. more

Marten repellent

CHF30.70

Stop+Go Marten repellent device

74

5. Stop+Go Scent mark remover

With the Stop & Go scent mark remover, the permanently successful marten defense begins. The fragrance brand remover is not a conventional engine cleaner, but the necessary pre-treatment of the engine compartment after marten bite. It serves exclusively to remove the specific fragrance of the marten. Application: Spray the cooled engine with the cleaning foam, consuming the entire can. Spray the entire engine compartment and the inside of the bonnet (including the insulating materials) as well as the wheel arches and mudguards thoroughly and area-wide. Allow the cleaning foam to act for a short time... If possible, simply rinse with water - no high-pressure cleaner with sharp jet or similar is necessary. Effective foam with good adhesion - Fast and inexpensive cleaning - Easy to use - Safe for rubber, varnish and plastics more

Marten repellent

Quantity discount

CHF11.70

Stop+Go Scent mark remover

53

6. Stop+Go Marten repellent device

Minimal effort, maximum flexibility! Full protection with just one clip. STOP&GO makes it possible! High-voltage ultrasonic combination device with six plus-minus clip stainless steel contact plates. The clip attachment option for the bipolar stainless steel contact plates simplifies installation and offers even more flexibility, especially for increasingly compact engine compartments. Additional contact plates can be attached later by "clipping on" at any point along the high-voltage cable, as well as extending it using another contact plate specifically for larger engine compartments, such as those found in SUVs and motorhomes. The connection to terminal 15 is eliminated thanks to sensor technology. Additionally, a contact slider directly attached to the device makes the installation of a hood contact switch unnecessary. We also strongly recommend using the STOP&GO scent marker remover before any marten deterrent measures.

Additional features:
- Battery-operated
- Sensor technology
- Power consumption: approx. 0.2 mA
- 6 clip stainless steel contact plates with positive and negative terminals
- 2 waterproof piezo speakers
- Radiation radius: 360°
- Radiation angle: over 170°
- Sound pressure: approx. 110 dB
- Frequency modulation to prevent habituation
- Function control light, blinking LED
- Waterproof according to IP65
- Panic protection circuit
- Also suitable for home and carport
- E1 certification from KBA. more

Marten repellent

CHF197.–

Stop+Go Marten repellent device

74

7. Stop+Go High voltage device 8 plus-minus

Battery-operated high-voltage device (2 x 3 V lithium button cells CR2477) with 6 stainless steel double contact plates, combined with ultrasound from high-quality piezo speakers and LEDs. This device has all the advantages of high-voltage devices 6 and 7 Plus-Minus. It no longer requires a hood contact switch, as it can be turned off directly on the device. The new sensor technology detects whether the vehicle is in motion and turns off the device. Once the vehicle is stationary, the device is turned back on. The blinking indicator light shows that sufficient voltage is present and additionally irritates martens. All of this is achieved without any electrical connections to the vehicle. more

Marten repellent

CHF155.–

Stop+Go High voltage device 8 plus-minus

44

8. Stop+Go marten-proof FM roof antenna made of metal, for R

Marten-proof radio antenna, made entirely of metal. This metal retrofit rod is a replacement for antennas with damaged plastic or rubber parts. It withstands any attack from martens and provides good radio reception quality. The antenna can be adjusted to lengths of 12, 17, or 26 cm using the included threaded rods. It features antenna feet with internal threads of 5, 6, and 7 mm and includes a new brass adapter thread suitable for a 6 mm external thread. more

Marten repellent

CHF15.40

Stop+Go marten-proof FM roof antenna made of metal, for R

9

9. Stop+Go High voltage unit 7 plus-minus

High-voltage device with 6 stainless steel double contact plates in a super flat design, combined with ultrasound and LEDs. The high-voltage device operates on the principle of an electric fence in a new slimline design and features double-pole stainless steel contact plates as well as ultrasound deterrence. It has 2 piezo speakers and no longer requires a hood contact switch, as it can be turned off directly on the device. The new sensor technology immediately detects the movement of the vehicle and switches the device off. Once the vehicle is stationary, the device is turned back on, eliminating the need for a connection to terminal 15. The blinking indicator light shows that sufficient voltage is present and additionally irritates martens. The device is dust and waterproof according to IP65. The contact plates can be placed individually, making the device universally suitable for all vehicle types. To achieve optimal effectiveness, we recommend mounting the contact plates in the upper third of the engine compartment. Installation time is reduced by approximately 50% with this device. It has a 12-volt connection and sensor technology, 6 stainless steel contact plates with negative and positive poles, a power consumption of only about 0.4 mA, 2 ultrasound piezo speakers, an effective radiation angle of more than 170°, is CAN data bus compatible, waterproof according to IP65, features frequency modulation with a frequency of 20 - 25 kHz and a sound pressure of at least 110 dB. Installation is very simple, as the device comes pre-wired. e1 certification. more

Marten repellent

CHF229.–

Stop+Go High voltage unit 7 plus-minus

44

10. Stop+Go Erweiterungsset für die Hochspannungsgeräte

The STOP&GO extension set 07504 is a specialized solution for enhancing marten protection in vehicles with large engine compartments. It consists of two robust stainless steel contact plates that ensure effective coverage of the engine bay. This set is particularly useful for SUVs, motorhomes, and other vehicles where extended coverage is necessary to optimize the effectiveness of the existing high-voltage device. The stainless steel plates are designed to seamlessly integrate into existing STOP&GO high-voltage installations without requiring modifications to the base unit. It is important to note that the set is exclusively suitable for specific STOP&GO systems and should only be used in the intended combinations.

- Allows for the expansion of marten protection without modifications to the base unit
- Specialized for vehicles with large engine compartments such as SUVs and motorhomes
- Includes two stainless steel contact plates for improved coverage
- Compatible with specific STOP&GO high-voltage devices. more

Marten repellent

CHF26.70

Stop+Go Erweiterungsset für die Hochspannungsgeräte