
Best Victron Energy products in the Leisure batteries category
On this page you'll find a ranking of the best Victron Energy products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Victron Energy Battery AGM
Valve-controlled battery cells. Gas can escape through safety valve. Excellent leakage safety. Can be used in any position. Absolutely maintenance-free. Particularly suitable for high current discharge applications. The AGM range has a very low internal resistance. Therefore these batteries are particularly suitable for applications with high current discharge such as inverters, steel rudders and winches. VRLA is the abbreviation for Valve Regulated Lead Acid. This means that the battery cells are valve regulated. Gas generated by overcharging or a cell fault can escape through a safety valve. VRLA batteries have excellent leakage safety and can be used in any position. They are absolutely maintenance free. Sealed (VRLA) AGM batteries. AGM stands for Absorbent Glass Mat. In this type of battery, the electrolyte is absorbed by capillary action in a fleece of fine glass fibers. Low self-discharge. Victron VRLA batteries can be stored for long periods without intermediate charging because of the use of lead-calcium grids and high purity materials. The self-discharge rate is less than 2% per month at 20°C. It doubles each time the temperature rises 10°C. When stored in cool conditions, Victron VRLA batteries can be stored for up to one year without intermediate charging. Excellent behavior after deep discharge. Victron VRLA batteries have excellent recovery behavior even after prolonged deep discharge. However, it should be noted that frequent and prolonged deep discharges can cause irreversible damage even to Victron batteries. Discharge behavior of the battery. The nominal capacity of Victron batteries refers to a discharge time of 20 hours i.e. to a discharge current of 0,05 C. A lower discharge current increases the effective capacity, and conversely it decreases at a higher discharge current. Charging current. The charging current should preferably not exceed 0.2 C i.e. 20 A for a 100 Ah battery. The battery temperature increases by more than 10°C when the charge current exceeds 0.2 C. Temperature compensation is then essential.

2. Victron Energy AGM Deep Cycle Battery 12V/90Ah
Victron battery AGM 12V 90Ah.

3. Victron Energy Lithium SuperPack 12.8V/100Ah High Current
12.8V Lithium SuperPack batteries (without Bluetooth)
Integrated BMS and safety switch
The SuperPack batteries are extremely easy to install and no additional components are required.
The internal switch disconnects the batteries in case of deep discharge, overcharge, low or high temperature.
!! Attention this battery does not have Bluetooth with charge level indicator etc !!!!
Protected from improper use
A lead-acid battery will fail prematurely due to sulphation in the following cases:
- If it is used for a long time in an insufficiently charged state (e.g. the battery is rarely or never fully charged).
- If it is left in a partially discharged, or worse, fully discharged state.
A lithium-ion battery does not need to be fully charged. In fact, the operating life increases slightly if the battery is only partially charged instead of fully charged.
charged instead of fully charged. This is a significant advantage of lithium-ion batteries compared to lead-acid batteries.
The SuperPack batteries interrupt the charging or discharging current when the maximum nominal values are exceeded.
Efficient
In many applications (especially off-grid solar systems), the energy efficiency can be crucial.
The energy efficiency of a charging cycle (discharging from 100 % to 0 % and recharging to 100 %) of an average lead-acid battery is approx.
80 %.
The energy efficiency of a charging cycle of a lithium-ion battery, on the other hand, is 92 %.
The charging process of a lead-acid battery becomes inefficient especially when the 80 % mark of the state of charge has been reached. This leads to
energy efficiency of only 50 %. This value is even lower for solar systems, since energy reserves are required for several days (the
battery is in operation at a state of charge between 70 % and 100 %).
A lithium-ion battery, on the other hand, still achieves an energy utilisation rate of 90 %, even when it is in a shallow state of discharge.
Can be connected in parallel
The batteries can be connected in parallel. Series connection is not permitted.
Use only in an upright position.

4. Victron Energy Lithium battery
Lithium battery 12.8V 100Ah Smart - With integrated cell equalisation & control cables for Victron BMS - Can be connected in parallel and in series - Bluetooth app available for monitoring cell voltage and temperature Requires one of these BMS: All Victron Smart lithium batteries require an external BMS. There is no warranty without a BMS! The BMS controls the charging (ATC) / discharging (ATD) based on the information from the battery. This control is different depending on the BMS, but in all cases requires additional wiring for charging / discharging. Below you will find links for selecting the correct BMS and BMS models. The following BMS are available: - VE.Bus BMS & VE.Bus BMS V2 - recommended for systems with our MultiPlus inverters/chargers. - smallBMS - recommended for use in small systems - Battery Management System BMS 12/200 - recommended for use in automotive and marine systems with DC loads and alternators. - Smart BMS CL 12/100 - recommended for use in automotive and marine systems with DC loads and alternators. - Lynx Smart BMS - recommended for larger systems / loads in combination with Lynx Distributor / Battery IN products Guide to system design and BMS selection The BMS models If you have any further questions, please do not hesitate to contact us. VictronConnect With VictronConnect you can query live status information and configure all Victron products that either have a built-in Bluetooth function or are connected with a VE.Direct Bluetooth Smart Dongle. Further information in the VictronConnect manual

5. Victron Energy 12V/90Ah GEL Deep Cycle Battery
GEL battery 12V 90Ah
VRLA AGM: planned lifetime 7-10 years (float)
VRLA GEL: planned lifetime 12 years (float)
VRLA GEL2 Volt cells: planned lifetime 20 years (float)
The AGM range has a very low internal resistance. Therefore, these batteries are particularly suitable for high current discharge applications such as inverters, steel rudders and winches.
The gel range offers the best deep cycle durability and longer overall life. The use of high purity materials and lead calcium grids ensures that both AGM and GEL products have a particularly low self-discharge. This prevents them from discharging during extended periods when you are not charging. Both ranges are supplied with M8 copper lug terminals. This ensures the best possible connection contact and eliminates the need for battery terminals. The batteries meet both CE and UL requirements in ABS fireproof containers and have a 2 year worldwide warranty from Victron.

6. Victron Energy Deep Cycle BAT212200084 Lead Battery 12V 22Ah Lead-Acid (AGM) (W x H x D) 181 x 167 x 7
Victron Energy Deep Cycle BAT212200084 Lead Battery 12V 22Ah Lead-Acid (AGM) (W x H x D) 181 x 167 x 77.

Victron Energy Deep Cycle BAT212200084 Lead Battery 12V 22Ah Lead-Acid (AGM) (W x H x D) 181 x 167 x 7
12 V
7. Victron Energy 12V/220Ah GEL Deep Cycle Battery
GEL battery 12V 220Ah
VRLA AGM: planned lifetime 7-10 years (float)
VRLA GEL: planned lifetime 12 years (float)
VRLA GEL2 Volt cells: planned lifetime 20 years (float)
The AGM range has a very low internal resistance. Therefore, these batteries are particularly suitable for high current discharge applications such as inverters, steel rudders and winches.
The gel range offers the best deep cycle durability and longer overall life. The use of high purity materials and lead calcium grids ensures that both AGM and GEL products have a particularly low self-discharge. This prevents them from discharging during extended periods when you are not charging. Both ranges are supplied with M8 copper lug terminals. This ensures the best possible connection contact and eliminates the need for battery terminals. The batteries meet both CE and UL requirements in ABS fireproof containers and have a 2 year worldwide warranty from Victron.

8. Victron Energy 12V/60Ah GEL Deep Cycle Battery
GEL battery 12V 60Ah
VRLA AGM: planned lifetime 7-10 years (float)
VRLA GEL: planned lifetime 12 years (float)
VRLA GEL2 Volt cells: planned lifetime 20 years (float)
The AGM range has a very low internal resistance. Therefore, these batteries are particularly suitable for high current discharge applications such as inverters, steel rudders and winches.
The gel range offers the best deep cycle durability and longer overall life. The use of high purity materials and lead calcium grids ensures that both AGM and GEL products have a particularly low self-discharge. This prevents them from discharging during extended periods when you are not charging. Both ranges are supplied with M8 copper lug terminals. This ensures the best possible connection contact and eliminates the need for battery terminals. The batteries meet both CE and UL requirements in ABS fireproof containers and have a 2 year worldwide warranty from Victron.

9. Victron Energy 12V/25Ah AGM Super Cycle Battery M5
AGM Super Cycle Battery 12V 25Ah
A truly innovative battery
AGM Super Cycle batteries are the result of the latest developments in battery electrochemistry.
The paste on the positive plates does not soften quickly, even if the battery is discharged to 100% several times.
In addition, the new additives in the electrolyte reduce sulphation in the event of a deep discharge.
Exceptional performance despite repeated deep discharge
Tests have shown that the Super Cycle battery continues to perform even after at least three hundred 100% deep discharges.
During the test, the batteries were discharged daily to 10.8 V with I = 0.2 C₂₀. They were then left in the discharged state for two hours and then recharged with I = 0.2 C₂₀. Most batteries will be damaged if left in a discharged state for two hours 100 times, but not the Super Cycle battery.
We recommend using the Super Cycle battery in cases where an occasional discharge to 100 % (deep discharge) or a more frequent discharge down to 60-80 % is to be expected.
Smaller and lighter
Another advantage of the new chemical composition is that the batteries are smaller and weigh less compared to our previous deep cycle AGM batteries.
Lower internal resistance
The internal resistance is also slightly lower than our usual deep cycle AGM batteries.

10. Victron Energy AGM Deep Cycle Battery 12V/130Ah
Victron battery AGM 12V 130Ah.
