
Best Etherma products in the Floor heating category
On this page you'll find a ranking of the best Etherma products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Etherma Plug-in heating loop 10m ICE-10 100W 230V for metal pipes 40575
The ICESTOP heating cable protects pipes from ice and consequently from damage. The ICESTOP is a ready-to-plug heating cable with a constant power output of approximately 10 W/m. The encapsulated thermostat is 100% moisture-proof and activates frost protection at temperatures below 3 °C, turning off again at 9 °C. It is suitable only for metal pipes. Protection class: IP X7, compliant, minimum installation temperature: -15 °C, dimensions: 5.5 x 8.5 mm, minimum bending radius: 3 d, plug connection cable: 2 m, 230 V. ICE-10.

2. Etherma Plug-in heating loop 16m ICE-16 160W 230V for metal pipes 40578
The ICESTOP heating cable protects pipes from ice and thus from damage. The ICESTOP is a ready-to-plug heating cable with a constant power output of approximately 10 W/m. The encapsulated thermostat is 100% moisture-proof and activates frost protection at temperatures below 3 °C and deactivates it at 9 °C. Suitable only for metal pipes. Protection class: IP X7, compliant, minimum installation temperature: -15 °C, dimensions: 5.5 x 8.5 mm, minimum bending radius: 3 d, plug connection cable: 2 m, 230 V. ICE-16.

3. Etherma Heating mat 130W/sqm 1560W 12sqm 1Cold 34199
Etherma Dipol Thin Bed Heating Mat 132-DS5-2400
Manufacturer: Etherma
Description: Dipol Thin Bed Heating Mat 50x2400 cm, 1570 W, 230 V
Type: 132-DS5-2400
Design: other
With carrier mat: yes
Heating conductor fixation: glued
Self-adhesive: yes
Connection voltage: 230 V
Connection power: 1560 W
Power: 130 W/m²
Heating conductor load: 9.8 W/m
Resistance: 34 Ohm
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 12 m²
Length: 24000 mm
Width: 500 mm
Thickness: 2.7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
The DS heating mat is a factory-prepared heating mat designed for floor temperature regulation, room heating, or cold insulation on walls. With a thickness of only 2.7 mm, the heating mat allows for a low floor build-up height. The heating mat is self-adhesive, and the Dipol design ensures easy installation in a tile adhesive bed and nearly magnetic field-free operation. The special processing guarantees 100% reliable, simple installation and high stability of the heating mat. Upon request, we can also manufacture DS heating mats in custom sizes, voltages, power ratings, and shapes. Dipole heating conductor, low magnetic field, nominal temperature: up to 90 °C, system construction: according to VDE 0700, heating conductor thickness: 2.7 mm, protection class: IP X7, grid spacing: 12x12 mm, self-adhesive, CE compliant, test mark: VDE, protective measure: RCD protection circuit 30 mA, standard connection cable: 4 m, 2x1.0 mm² protective braid.

4. Etherma Plug-in heating loop 24m ICE-24 240W 230V for metal pipes 40581
ETHERMA plug-in heating loop 24m ICE-24 240W 230V for metal pipes 40581 1 (40581).

5. Etherma FPT-4
The Etherma FPT-4 heating tape is an innovative solution for pipe trace heating that provides reliable and efficient heat distribution. With a heating power of 68 watts and a length of 4 meters, this heating tape is ideal for use on plastic pipes. It is plug-and-play and self-regulating, meaning it automatically adjusts to the ambient temperature to prevent overheating. The heating tape is made from high-quality materials, including a nickel coating that ensures durability and reliability. The IPX7 protection rating guarantees that the product is protected against water ingress, making it suitable for various applications. The manual operating mode allows for easy handling and control.
- Self-regulating heating tape for optimal temperature control
- Suitable for plastic pipes to prevent frost damage
- Made from durable nickel-coated material
- IPX7 protection rating for additional water protection.

6. Etherma Heating cable 120W/sqm 1200W 10sqm 1cold 6W/m 44781
Etherma Laminotherm Set SET-eFLOOR-LMPRO2000
Manufacturer: Etherma
Description: Laminotherm Set 10 sqm, 1200 W
Type: SET-eFLOOR-LMPRO2000
Design: Heating cable
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: no
Connection voltage: 230 V
Connection power: 1200 W
Power: 120 W/m²
Heating conductor load: 6 W/m
Resistance: 44 Ohm
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 10 m²
Length: 20000 mm
Width: 500 mm
Thickness: 1.3 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
The eFLOOR LM PRO underfloor heating set consists of a Laminotherm dipole heating mat, the smart switch-in thermostat eTOUCH PRO, a sensor protection tube FSH, and 2.5 meters of installation hose with only 12 mm diameter. The Laminotherm heating mat has 120 W/m², is characterized by its easy installation, and features a magnetic field-free dipole heating conductor. eTOUCH PRO is a switch-in thermostat with a 1.8 TFT color display, programmable on and off times, and complies with the Ecodesign Directive. It is distinguished by its energy-saving function and its elegant design. Voltage of heating mat 230 V. EAN: 9120105413336.

7. Etherma ICE-20
The ICESTOP heating cable protects pipes from ice and subsequently from damage. The ICESTOP is a ready-to-plug heating cable with a constant power output of approximately 10 W/m. The encapsulated thermostat is 100% moisture-proof and activates frost protection at temperatures below 3 °C, turning off again at 9 °C. Suitable only for metal pipes. Protection class: IP X7, compliant, minimum installation temperature: -15 °C, dimensions: 5.5 x 8.5 mm, minimum bending radius: 3 d, plug connection cable: 2 m, 230 V. ICE-20.

8. Etherma PA-3-NA
The Etherma PA-3-NA heating carpet is an innovative solution for heating rooms. With a heating power of 150 watts, it offers efficient heat distribution and ensures a pleasant indoor climate. The heating carpet is self-adhesive and easy to install, making it ideal for various applications. Thanks to its compact design with a height of only 8 millimeters, it can be easily placed under furniture or in other tight spaces. The PA-3-NA is made of high-quality plastic and has an IPX1 protection rating, which protects it from splashes of water. With a connection cable of 2 meters, it is versatile and can be used in different room sizes. The heating carpet is a practical and comfortable solution for anyone looking for an additional heat source in their home.
- Easy self-installation due to self-adhesive backing
- High efficiency with 150 watts of heating power
- IPX1 protection rating for added safety protection.

9. Etherma Heating mat 175W/sqm 100W 0.63sqm 1Cold 35765
The Etherma heating mat offers an efficient solution for heating rooms. With a power output of 100 watts and an area of 0.63 square meters, it is ideal for manual use in various living spaces. The self-adhesive installation allows for easy setup, while the 3-meter connection cable provides ample flexibility for placement. The matte gray surface blends harmoniously into different room designs. This heating mat is particularly suitable for targeted heating of smaller areas and contributes to creating a pleasant indoor climate. Using this heating mat can enhance the efficiency of heating systems and improve comfort in living spaces. It is a practical choice for anyone looking for a flexible and effective heating solution.

10. Etherma Plug-in heating loop 14m ICE-14 140W 230V for metal pipes 40577
The ICESTOP heating cable protects pipes from ice and subsequently from damage. The ICESTOP is a ready-to-plug heating cable with a constant power output of approximately 10 W/m. The encapsulated thermostat is 100% moisture-proof and activates frost protection at temperatures below 3 °C and deactivates it at 9 °C. It is suitable only for metal pipes. Protection class: IP X7, compliant, minimum installation temperature: -15 °C, dimensions: 5.5 x 8.5 mm, minimum bending radius: 3 d, plug connection cable: 2 m, 230 V. ICE-14.
