Best Simpson Sst products in the Builders’ fittings + Wood connectors category
On this page you'll find a ranking of the best Simpson Sst products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Simpson Sst Wood connector
E20/3 angle connectors are particularly suitable for connections where large forces have to be transmitted, the E20/3 angle connectors are provided with ribs, steel quality: S 250 GD + Z 275 according to DIN EN 10346, corrosion protection: 275 g/m2 on both sides - correspond to a zinc layer thickness of approx. 20 μm, Advantage: high tensile and shear load capacity due to the rib reinforcement, optimized load capacities for full and partial nailing, advantageous fastening by means of bolt anchors to components made of concrete or steel, Support: wood, concrete, steel, component to be supported: wood, wood materials, Application: fastening of wood to concrete or steel with M10 bolts.
2. Simpson Sst Support feet PB 80
Support feet PB 80
for the assembly of supports and posts subjected only to compression

Fixing: Bolt.
3. Simpson Sst Angle connector EFIXR553
Simpson Sst Angle connector EFIXR553
Angle connector, 1 pcs.
4. Simpson Sst Support foot
For compression-only mounting of columns and posts Fastening: Bolts. Dimension A:70 mm. Dimension B:105 mm. Dimension C:90 mm. Material thickness: 6 mm.
5. Simpson Sst Fitting connector
Simpson ETB fitting connector. Consisting of insertion plate and T-plate, fixing holes ø 5/5.4 mm.
6. Simpson Sst Angle connector type 70
Angle connector SST, type 70 steel galvanized, 70/70/55 mm with rib reinforcement.
Simpson Sst Angle connector type 70
Angle connector, 1 pcs.
7. Simpson Sst Angle connector
The AKR angle connectors allow optimal connections between wood and other building materials such as concrete, steel, etc. In the short leg the types AKR and AKR...L differ by the hole or long hole for the bolt. Economical connections of wooden components to concrete or steel are possible in many areas with these angles.
Simpson Sst Angle connector
Angle connector, 1 pcs.
8. Simpson Sst Perforated metal strip
Perforated metal strip SST, 2 mm steel hot-dip galvanized, 40/1200 mm.
Simpson Sst Perforated metal strip
Punched strip, 1 pcs.
9. Simpson Sst Perforated sheet
Perforated plates Simpson NP. Fixing holes ø 5 mm. Type NP15/40/160. dimension A 40 mm. Dimension B 160 mm. Dimension t 1.5 mm.
10. Simpson Sst angle connector
Hot-dip galvanized sheet steel
Fastening: screw 5.0, comb anchor nail 4.0, bolt.
Simpson Sst angle connector
Angle connector, 1 pcs.