XPOtool Tile Levelling System 100 Spacer Clips for 3-12mm Tiles and 2.0mm Joints for Lipless Tiling

Tile spacers are the optimal tool for laying tiles evenly and avoiding unevenness. The spacers are combined with the corresponding wedges to achieve a perfect result. The tile spacer is placed in the joint, and after the adjacent tile is laid, the wedge is pressed through the spacer using a special pliers. The wedge is pushed through the spacer until both tiles reach the same height level.

Once the tile adhesive has cured, the tiles are positioned and laid at the correct height. The wedges can then be pulled out of the spacers and are reusable. The spacers, however, have predetermined breaking points, which are used after the adhesive has cured to break off the visible part of the spacer. The lower part remains between the tiles and is grouted, making it invisible after grouting.

The width of the joint depends on the material thickness of the spacer. In this case, the spacer has a thickness of 2.0 mm, resulting in a joint width of also 2.0 mm. To allow for tiling over a larger area, each bag contains 100 spacers. The spacers are suitable for tiles with thicknesses ranging from 3 to 12 mm.