XPOtool Tile Levelling System 100 Reusable Wedges for Laying Floor Tiles, Flagstones or Slabs Evenly

Wedges are needed to lay tiles evenly and avoid unevenness. For this purpose, the wedges are combined with the corresponding pull tabs (not included) and used as follows: The pull tab is placed in the joint, and after the adjacent tile is laid, the wedge is pressed through the pull tab using a special pliers (not included). The wedge is pushed through the tab until both tiles reach the same height level.

Now, the tile adhesive just needs to cure, and the tiles are laid in the correct position and height. Afterwards, the wedges can be pulled out of the tabs and are reusable. The pull tabs, on the other hand, have predetermined breaking points, which are used after the adhesive has cured to break off the visible part of the tab. The lower part remains between the tiles and is grouted, so it is no longer visible after grouting.

The width of a joint depends on the material thickness of the pull tab. To allow for larger areas to be tiled, 100 wedges are included per bag.