Walther 98603214E

Walther Wallbox smartEVO duo connect+

Features:

• Charging process in Mode 3 according to IEC 61851
• 2 Type 2 charging sockets (Mode 3)
• Charging power per charging point up to 22 kW

Three status LEDs on the side panel to indicate the current status of the charging point. Authentication via RFID panel on the side.

Visible energy meter (MID-certified) for each charging point. Display of consumption data according to calibration law and representation of the public key as a QR code and plaintext.

Powerline communication (PLC) according to ISO 15118 enables Plug & Charge and bidirectional communication with the vehicle.

Connection to energy management systems via Modbus TCP or EEBUS. Connectivity to IPD control and IPD manager as well as to the SMA communication protocol (SEMP).

Integrated web server for firmware updates and control/maintenance via remote access. Ethernet interface including AMJ module for connection to fixed data cable.

Smart grid capability through OCPP 1.6 (JSON). Integrated 4G modems (micro SIM) for connection to backend and roaming platforms of various providers.

Local dynamic load management (DLM) including unbalanced load monitoring (phase-accurate control) for efficient use of available charging power with up to 250 charging points.

For each charging point:

• Permanent PE monitoring
• 6 mA DC residual current monitoring and RCD Type A
• Contactor monitoring (welding monitoring)

Integrated 2-stage temperature monitoring.

Robust and weatherproof housing. Galvanized, powder-coated steel sheet housing in mica gray (DB703). Lockable door in an elegant design.

Max. connection of the supply cable with NYY-J 2x5x10 mm². Direct connection to the residual current protection switch.

Included accessories:

• 2 RFID cards Mifare-Desfire EV1
• 1 key
• 1 wall mount
• 1 AMJ module
• Mounting screws
• Drilling template
• QuickGuide.