Ubiquiti Reader Flex

Overview

• Dimensions: 84 x 84 x 40.8 mm (3.3 x 3.3 x 1.6")
• NFC card and keyfob access: Yes
• PIN access: Yes
• Touch pass: Yes
• Mobile unlock: Yes
• Weatherproof: IP55

Mechanical

• Weight: 165 g (5.8 oz)
• Housing material: Polycarbonate, glass, aluminium alloy
• Mounting material: Polycarbonate, aluminium alloy
• Mounting: Wall (included) gang box, junction box (optional)

Hardware

• Indoor and outdoor use: Yes
• Operating temperature: -30 to 60° C (-22 to 140° F)
• Humidity: 5 to 90% non-condensing
• Network interface: (1) 10/100 MbE RJ45 port
• Connectivity: BLE 4.1 NFC
• Power supply method: PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
• Max. power consumption: 5 W
• Supported voltage range: 44-57V DC
• ESD/EMP protection: air: ±15kV, contact: ±8kV
• Sensors: (12) capacitive buttons
• Speaker: Yes
• LEDs: R/G/B/W
• Button: (1) factory reset
• NFC frequency: 13.56 MHz
• NFC read range: < 30 mm (1.18")
• NFC technology: ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum Tags T1T, T2T, T3T, T4T and T5T ECP 2.0
• PoE cabling requirements: Cat 5e cabling is the recommended minimum power category. The power category used should correspond to the transmission speed required at the installation site. The minimum allowable conductor cross-section for the connection between the PSE or Power Injector and the PD is 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cables.
• UL 294 Level: Destructive Attack: Level I Line Safety: Level I Durability: Level I Standby Power: Level I
• UL 294 Statement: Compliance with IEEE 802.3 specifications has not been verified under UL 294. The device is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
• CAN/ULC-60839-11-1 Class: Classification: I.