SW-Stahl 11632L Trennmesser 22-115 mm I Lagerabzieher I Kugellager Abzieher Werkzeug für dichte bünd

The bearing puller tool is used to loosen tight connections between components. Pressed, shrunk, or retracted components that are held in place by their own friction can be removed with the puller. This separating tool is used when pulling with pull hooks is not possible, as the components to be removed are too closely seated or flush.

To use the puller, you will need the appropriate pulling device. To connect the components, the pull bolts are screwed into the threads of the separating tool. The suitable pulling device for this separating tool is 11642L.

Two- or three-legged internal pullers are ideal for loosening pressed parts from axles or from holes, such as bushings or ball bearings. Among other things, the ball joint puller is used for pulling on and off gears, bearing outer rings, pulleys, flywheels, windshield wipers, and similar parts.

Before using the puller tool, remove any parts that could obstruct the free exit of the part to be pulled, such as screws, nuts, wedges, etc. The puller arms should be positioned so that the bearing puller is aligned precisely along the pulling axis.