Stiebel Eltron FTM 100/7

Stiebel Eltron Floor Heating FTM 100/7

Manufacturer: Stiebel Eltron
Description: Floor heating for 7 m², 700W/230V
Type: FTM 100/7
Design: Heating cable
With carrier mat: yes
Fixation of heating conductor: sewn
Self-adhesive: yes
Connection voltage: 230 V
Connection power: 700 W
Power: 100 W/m²
Heating conductor load: 9 W/m
Resistance: 73 Ohm
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 7 m²
Length: 14000 mm
Width: 500 mm
Thickness: 3 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The thin-bed heating mats with moderate heating output are suitable for use under soft floor coverings such as carpet, vinyl, or cork.

Comfort features: Installed directly in the screed or leveling compound under the floor covering, the thin-bed heating mat quickly provides a pleasantly warm floor surface, regardless of the existing heating system. It can be used as an additional or supplementary heating source. Due to its low installation height, it can be used directly in tile adhesive under ceramic coverings or in a leveling layer for carpets and other soft floor coverings. The installation width is well-suited for large rooms with a clear geometry. In combination with a water-based underfloor heating system, the comfort of a warm floor can also be enjoyed outside the heating season. The heating conductor is completely sewn onto the self-adhesive carrier mat, making it easy and quick to install on the floor.

Installation: The mat can be installed in the bathroom in conjunction with a residual current device. By cutting the carrier fabric, the mats can be adapted to individual space conditions.

EAN: 4017212056615.