Stamos CNC Plasma Cutter - 85 A - 400 V - pilot arc

The powerful plasma cutter for CNC machines from Stamos. The S-PLASMA 85CNC plasma cutter from Stamos Selection has been specifically designed for professional use on CNC machines, but is also suitable for manual operation. It is a device with a 400 V high-voltage connection with 3 phases. The S-PLASMA 85CNC plasma cutter impresses with special features such as a powder-coated steel housing, high efficiency, and top-notch cutting quality. With thermal overload protection, you are always on the safe side while cutting, ensuring maximum safety and optimal reliability. The plasma cutter operates with a cutting current of 20 to 85 A, allowing for easy cutting of materials up to 27 mm thick. The S-PLASMA 85 CNC plasma cutter uses state-of-the-art bipolar transistor technology (Insulated Gate Bipolar Transistor; IGBT), which provides high robustness against short circuits, as the IGBT limits the load current.

Technical details:
Input voltage: 400 V, 3-phase
Frequency: 50/60 Hz
Input current: 19 A
No-load voltage: 280 V
Housing protection class: IP21S
Insulation class: F
Overvoltage protection: Yes
Cooling: Fan
Solenoid valve: Yes
Duty cycle max.: 60 %
Cutting current at 100 % duty cycle: 65.8 A
Cutting current: 20 - 85 A
Ignition: Non-contact
Cutting depth: up to 27 mm (depending on material)
Cutting width: 1.2 mm
Compressor connection: 5.5 bar

Scope of delivery:
S-PLASMA 85CNC plasma cutter, 5 m plasma hose package, 4 m air hose, 4 m ground cable, 6 cutting nozzles, 6 plasma electrodes, pressure gauge and pressure reducer, operating manual.